Zeszyty czasopisma

AHEAD OF PRINT

Tom 44 (2022): Zeszyt 3 (September 2022)

Tom 44 (2022): Zeszyt 2 (June 2022)

Tom 44 (2022): Zeszyt 1 (March 2022)

Tom 43 (2021): Zeszyt 4 (December 2021)

Tom 43 (2021): Zeszyt 3 (September 2021)

Tom 43 (2021): Zeszyt 2 (June 2021)

Tom 43 (2021): Zeszyt s1 (December 2021)
Special Zeszyt: Underground Infrastructure of Urban Areas

Tom 43 (2021): Zeszyt 1 (April 2021)

Tom 42 (2020): Zeszyt 4 (December 2020)

Tom 42 (2020): Zeszyt 3 (September 2020)

Tom 42 (2020): Zeszyt 2 (June 2020)

Tom 42 (2020): Zeszyt 1 (April 2020)

Tom 41 (2019): Zeszyt 4 (December 2019)

Tom 41 (2019): Zeszyt 3 (September 2019)

Tom 41 (2019): Zeszyt 2 (June 2019)

Tom 41 (2019): Zeszyt 1 (April 2019)

Tom 40 (2018): Zeszyt 4 (December 2018)

Tom 40 (2018): Zeszyt 3 (November 2018)

Tom 40 (2018): Zeszyt 2 (October 2018)

Tom 40 (2018): Zeszyt 1 (July 2018)

Tom 39 (2017): Zeszyt 4 (December 2017)

Tom 39 (2017): Zeszyt 3 (September 2017)

Tom 39 (2017): Zeszyt 2 (June 2017)

Tom 39 (2017): Zeszyt 1 (March 2017)

Tom 38 (2016): Zeszyt 4 (December 2016)

Tom 38 (2016): Zeszyt 3 (September 2016)

Tom 38 (2016): Zeszyt 2 (June 2016)

Tom 38 (2016): Zeszyt 1 (March 2016)

Tom 37 (2015): Zeszyt 4 (December 2015)

Tom 37 (2015): Zeszyt 3 (September 2015)

Tom 37 (2015): Zeszyt 2 (June 2015)

Tom 37 (2015): Zeszyt 1 (March 2015)

Tom 36 (2014): Zeszyt 4 (December 2014)

Tom 36 (2014): Zeszyt 3 (September 2014)

Tom 36 (2014): Zeszyt 2 (June 2014)

Tom 36 (2014): Zeszyt 1 (March 2014)

Tom 35 (2013): Zeszyt 4 (December 2013)

Tom 35 (2013): Zeszyt 3 (September 2013)

Tom 35 (2013): Zeszyt 2 (June 2013)

Tom 35 (2013): Zeszyt 1 (March 2013)

Tom 34 (2012): Zeszyt 4 (December 2012)

Tom 34 (2012): Zeszyt 3 (September 2012)

Tom 34 (2012): Zeszyt 2 (June 2012)

Tom 34 (2012): Zeszyt 1 (March 2012)

Informacje o czasopiśmie
Format
Czasopismo
eISSN
2083-831X
ISSN
0137-6365
Pierwsze wydanie
09 Nov 2012
Częstotliwość wydawania
4 razy w roku
Języki
Angielski

Wyszukiwanie

Tom 36 (2014): Zeszyt 3 (September 2014)

Informacje o czasopiśmie
Format
Czasopismo
eISSN
2083-831X
ISSN
0137-6365
Pierwsze wydanie
09 Nov 2012
Częstotliwość wydawania
4 razy w roku
Języki
Angielski

Wyszukiwanie

8 Artykułów
Otwarty dostęp

Numerical Simulation of Crater Creating Process in Dynamic Replacement Method by Smooth Particle Hydrodynamics

Data publikacji: 28 Feb 2015
Zakres stron: 3 - 8

Abstrakt

Abstract

A theoretical base of SPH method, including the governing equations, discussion of importance of the smoothing function length, contact formulation, boundary treatment and finally utilization in hydrocode simulations are presented. An application of SPH to a real case of large penetrations (crater creating) into the soil caused by falling mass in Dynamic Replacement Method is discussed. An influence of particles spacing on method accuracy is presented. An example calculated by LS-DYNA software is discussed. Chronological development of Smooth Particle Hydrodynamics is presented. Theoretical basics of SPH method stability and consistency in SPH formulation, artificial viscosity and boundary treatment are discussed. Time integration techniques with stability conditions, SPH+FEM coupling, constitutive equation and equation of state (EOS) are presented as well.

Słowa kluczowe

  • dynamic replacement method
  • SPH
  • impact soil
Otwarty dostęp

Analysis of the Vibration Propagation in the Subsoil

Data publikacji: 28 Feb 2015
Zakres stron: 9 - 19

Abstrakt

Abstract

The paper presents in a comprehensive way issues related to propagation in a soil environment of vibrations originating during sheet piling vibratory driving. Considerations carried out comprised the FEM analysis of initial-boundary behaviour of the subsoil during impacts accompanying the works performed. The analysis has used the authors' RU+MCC constitutive model, which can realistically describe complex deformation characteristics in soils in the field of small strains, which accompany the phenomenon of shock propagation. The basis for model creation and for specification of material parameters of the presented model consisted of first-class tests performed in a triaxial apparatus using proximity detectors guaranteeing a proper measurement of strains ranging from 10-1 to 10-3% and bender elements. Results obtained from numerical analyses were confronted with results of field tests consisting in measurements of acceleration amplitudes generated on the ground surface due to technological impacts versus the distance from vibration source.

Słowa kluczowe

  • soil characteristics in small strain range
  • triaxial tests
  • dynamic analysis
Otwarty dostęp

Behaviour of Cohesive Soil Subjected to Low-Frequency Cyclic Loading in Strain-Controlled Tests

Data publikacji: 28 Feb 2015
Zakres stron: 21 - 35

Abstrakt

Abstract

The subject of the paper comprises tests of cohesive soil subjected to low-frequency cyclic loading with constant strain amplitude. The main aim of the research is to define a failure criteria for cohesive soils subjected to this type of load. Tests of undrained cyclic shear were carried out in a triaxial apparatus on normally consolidated reworked soil samples made of kaolinite clay from Tułowice. Analysis of the results includes the influence of number of load cycles on the course of effective stress paths, development of excess pore water pressure and stress deviator value. Observed regularities may seem surprising. The effective stress path initially moves away from the boundary surface and only after a certain number of load-unload cycles change of its direction occurs and it starts to move consequently towards the surface. At the same time, it has been observed that pore water pressure value decreases at the beginning and after few hundred cycles increases again. It is a typical behaviour for overconsolidated soil, while test samples are normally consolidated. Additionally, a similar change in deviator stress value has been observed - at first it decreases and later, with subsequent cycles, re-increases.

Słowa kluczowe

  • cohesive soils
  • triaxial tests
  • cyclic loading
  • strain-controlled tests
Otwarty dostęp

Failure Criterion for Brick Masonry: A Micro-Mechanics Approach

Data publikacji: 28 Feb 2015
Zakres stron: 37 - 48

Abstrakt

Abstract

The paper deals with the formulation of failure criterion for an in-plane loaded masonry. Using micro-mechanics approach the strength estimation for masonry microstructure with constituents obeying the Drucker-Prager criterion is determined numerically. The procedure invokes lower bound analysis: for assumed stress fields constructed within masonry periodic cell critical load is obtained as a solution of constrained optimization problem. The analysis is carried out for many different loading conditions at different orientations of bed joints. The performance of the approach is verified against solutions obtained for corresponding layered and block microstructures, which provides the upper and lower strength bounds for masonry microstructure, respectively. Subsequently, a phenomenological anisotropic strength criterion for masonry microstructure is proposed. The criterion has a form of conjunction of Jaeger critical plane condition and Tsai-Wu criterion. The model proposed is identified based on the fitting of numerical results obtained from the microstructural analysis. Identified criterion is then verified against results obtained for different loading orientations. It appears that strength of masonry microstructure can be satisfactorily described by the criterion proposed.

Słowa kluczowe

  • strength anisotropy
  • micromechanics
  • masonry microstructure
  • masonry
  • failure criterion
Otwarty dostęp

The Analysis of Soil Resistance During Screw Displacement Pile Installation

Data publikacji: 28 Feb 2015
Zakres stron: 49 - 56

Abstrakt

Abstract

The application of screw displacement piles (SDP) is still increasing due to their high efficiency and many advantages. However, one technological problem is a serious disadvantage of those piles. It relates to the generation of very high soil resistance during screw auger penetration, especially when piles are installed in non-cohesive soils. In many situations this problem causes difficulties in creating piles of designed length and diameter. It is necessary to find a proper method for prediction of soil resistance during screw pile installation. The analysis of screw resistances based on model and field tests is presented in the paper. The investigations were carried out as part of research project, financed by the Polish Ministry of Science and Higher Education. As a result of tests and analyses the empirical method for prediction of rotation resistance (torque) during screw auger penetration in non-cohesive subsoil based on CPT is proposed.

Słowa kluczowe

  • screw displacement pile
  • pile installation
  • pile auger
  • torque
  • soil resistance
Otwarty dostęp

Microstructural and Tomographic Analyses in Geotechnical Assessment of Soil Media

Data publikacji: 28 Feb 2015
Zakres stron: 57 - 66

Abstrakt

Abstract

This paper discusses two different approaches to microanalysis of the soil medium. It presents testing results collected by electromicroscopy, which requires special sample preparation, and a non-destructive method, requiring no sample preparation and using a computer-assisted tomograph. The paper presents:

• Applicability of microstructure analyses and chemical microanalysis in the determination of structural damage incurred in the historical time in relation to the effect of contemporary abiotic events;

• Application of a standard medical computer-assisted tomograph in qualitative assessment of structure and observations of mechanisms of failure in the cement/peat soil composite.

Investigations concerning the applicability of computed tomography in soil micromechanics are demonstrative in character and the presented conclusions suggest further directions for research.

Słowa kluczowe

  • clay soils
  • organics soil composition
  • microstructure
  • computed tomography
Otwarty dostęp

Particle Shape Effect on Macroscopic Behaviour of Underground Structures: Numerical and Experimental Study

Data publikacji: 28 Feb 2015
Zakres stron: 67 - 74

Abstrakt

Abstract

The mechanical performance of underground flexible structures such as buried pipes or culverts made of plastics depend not only on the properties of the structure, but also on the material surrounding it. Flexible drains can deflect by 30% with the joints staying tight, or even invert. Large deformations of the structure are difficult to model in the framework of Finite Element Method, but straightforward in Discrete Element Methods. Moreover, Discrete Element approach is able to provide information about the grain-grain and grain-structure interactions at the microscale. This paper presents numerical and experimental investigations of flexible buried pipe behaviour with focus placed on load transfer above the buried structure. Numerical modeling was able to reproduce the experimental results. Load repartition was observed, being affected by a number of factors such as particle shape, pipe friction and pipe stiffness.

Słowa kluczowe

  • discrete element method
  • particle shape
  • underground pipe
  • digital image correlation
Otwarty dostęp

Technical Notoe: Prediction of Static Liquefaction by Nor Sand Constitutive Model

Data publikacji: 28 Feb 2015
Zakres stron: 75 - 83

Abstrakt

Abstract

The paper gives a short description of unstable behaviour of saturated sand under undrained monotonic loading. Constitutive model Nor Sand capable to describe static liquefaction is presented. The model is based on critical state soil mechanics and assumes associated flow rule. Hardening law incorporates the state parameter proposed earlier by Been and Jefferies. Results of numerical simulations of undrained element tests have been presented and discussed.

Słowa kluczowe

  • static liquefaction
  • Nor Sand
  • element test simulation
8 Artykułów
Otwarty dostęp

Numerical Simulation of Crater Creating Process in Dynamic Replacement Method by Smooth Particle Hydrodynamics

Data publikacji: 28 Feb 2015
Zakres stron: 3 - 8

Abstrakt

Abstract

A theoretical base of SPH method, including the governing equations, discussion of importance of the smoothing function length, contact formulation, boundary treatment and finally utilization in hydrocode simulations are presented. An application of SPH to a real case of large penetrations (crater creating) into the soil caused by falling mass in Dynamic Replacement Method is discussed. An influence of particles spacing on method accuracy is presented. An example calculated by LS-DYNA software is discussed. Chronological development of Smooth Particle Hydrodynamics is presented. Theoretical basics of SPH method stability and consistency in SPH formulation, artificial viscosity and boundary treatment are discussed. Time integration techniques with stability conditions, SPH+FEM coupling, constitutive equation and equation of state (EOS) are presented as well.

Słowa kluczowe

  • dynamic replacement method
  • SPH
  • impact soil
Otwarty dostęp

Analysis of the Vibration Propagation in the Subsoil

Data publikacji: 28 Feb 2015
Zakres stron: 9 - 19

Abstrakt

Abstract

The paper presents in a comprehensive way issues related to propagation in a soil environment of vibrations originating during sheet piling vibratory driving. Considerations carried out comprised the FEM analysis of initial-boundary behaviour of the subsoil during impacts accompanying the works performed. The analysis has used the authors' RU+MCC constitutive model, which can realistically describe complex deformation characteristics in soils in the field of small strains, which accompany the phenomenon of shock propagation. The basis for model creation and for specification of material parameters of the presented model consisted of first-class tests performed in a triaxial apparatus using proximity detectors guaranteeing a proper measurement of strains ranging from 10-1 to 10-3% and bender elements. Results obtained from numerical analyses were confronted with results of field tests consisting in measurements of acceleration amplitudes generated on the ground surface due to technological impacts versus the distance from vibration source.

Słowa kluczowe

  • soil characteristics in small strain range
  • triaxial tests
  • dynamic analysis
Otwarty dostęp

Behaviour of Cohesive Soil Subjected to Low-Frequency Cyclic Loading in Strain-Controlled Tests

Data publikacji: 28 Feb 2015
Zakres stron: 21 - 35

Abstrakt

Abstract

The subject of the paper comprises tests of cohesive soil subjected to low-frequency cyclic loading with constant strain amplitude. The main aim of the research is to define a failure criteria for cohesive soils subjected to this type of load. Tests of undrained cyclic shear were carried out in a triaxial apparatus on normally consolidated reworked soil samples made of kaolinite clay from Tułowice. Analysis of the results includes the influence of number of load cycles on the course of effective stress paths, development of excess pore water pressure and stress deviator value. Observed regularities may seem surprising. The effective stress path initially moves away from the boundary surface and only after a certain number of load-unload cycles change of its direction occurs and it starts to move consequently towards the surface. At the same time, it has been observed that pore water pressure value decreases at the beginning and after few hundred cycles increases again. It is a typical behaviour for overconsolidated soil, while test samples are normally consolidated. Additionally, a similar change in deviator stress value has been observed - at first it decreases and later, with subsequent cycles, re-increases.

Słowa kluczowe

  • cohesive soils
  • triaxial tests
  • cyclic loading
  • strain-controlled tests
Otwarty dostęp

Failure Criterion for Brick Masonry: A Micro-Mechanics Approach

Data publikacji: 28 Feb 2015
Zakres stron: 37 - 48

Abstrakt

Abstract

The paper deals with the formulation of failure criterion for an in-plane loaded masonry. Using micro-mechanics approach the strength estimation for masonry microstructure with constituents obeying the Drucker-Prager criterion is determined numerically. The procedure invokes lower bound analysis: for assumed stress fields constructed within masonry periodic cell critical load is obtained as a solution of constrained optimization problem. The analysis is carried out for many different loading conditions at different orientations of bed joints. The performance of the approach is verified against solutions obtained for corresponding layered and block microstructures, which provides the upper and lower strength bounds for masonry microstructure, respectively. Subsequently, a phenomenological anisotropic strength criterion for masonry microstructure is proposed. The criterion has a form of conjunction of Jaeger critical plane condition and Tsai-Wu criterion. The model proposed is identified based on the fitting of numerical results obtained from the microstructural analysis. Identified criterion is then verified against results obtained for different loading orientations. It appears that strength of masonry microstructure can be satisfactorily described by the criterion proposed.

Słowa kluczowe

  • strength anisotropy
  • micromechanics
  • masonry microstructure
  • masonry
  • failure criterion
Otwarty dostęp

The Analysis of Soil Resistance During Screw Displacement Pile Installation

Data publikacji: 28 Feb 2015
Zakres stron: 49 - 56

Abstrakt

Abstract

The application of screw displacement piles (SDP) is still increasing due to their high efficiency and many advantages. However, one technological problem is a serious disadvantage of those piles. It relates to the generation of very high soil resistance during screw auger penetration, especially when piles are installed in non-cohesive soils. In many situations this problem causes difficulties in creating piles of designed length and diameter. It is necessary to find a proper method for prediction of soil resistance during screw pile installation. The analysis of screw resistances based on model and field tests is presented in the paper. The investigations were carried out as part of research project, financed by the Polish Ministry of Science and Higher Education. As a result of tests and analyses the empirical method for prediction of rotation resistance (torque) during screw auger penetration in non-cohesive subsoil based on CPT is proposed.

Słowa kluczowe

  • screw displacement pile
  • pile installation
  • pile auger
  • torque
  • soil resistance
Otwarty dostęp

Microstructural and Tomographic Analyses in Geotechnical Assessment of Soil Media

Data publikacji: 28 Feb 2015
Zakres stron: 57 - 66

Abstrakt

Abstract

This paper discusses two different approaches to microanalysis of the soil medium. It presents testing results collected by electromicroscopy, which requires special sample preparation, and a non-destructive method, requiring no sample preparation and using a computer-assisted tomograph. The paper presents:

• Applicability of microstructure analyses and chemical microanalysis in the determination of structural damage incurred in the historical time in relation to the effect of contemporary abiotic events;

• Application of a standard medical computer-assisted tomograph in qualitative assessment of structure and observations of mechanisms of failure in the cement/peat soil composite.

Investigations concerning the applicability of computed tomography in soil micromechanics are demonstrative in character and the presented conclusions suggest further directions for research.

Słowa kluczowe

  • clay soils
  • organics soil composition
  • microstructure
  • computed tomography
Otwarty dostęp

Particle Shape Effect on Macroscopic Behaviour of Underground Structures: Numerical and Experimental Study

Data publikacji: 28 Feb 2015
Zakres stron: 67 - 74

Abstrakt

Abstract

The mechanical performance of underground flexible structures such as buried pipes or culverts made of plastics depend not only on the properties of the structure, but also on the material surrounding it. Flexible drains can deflect by 30% with the joints staying tight, or even invert. Large deformations of the structure are difficult to model in the framework of Finite Element Method, but straightforward in Discrete Element Methods. Moreover, Discrete Element approach is able to provide information about the grain-grain and grain-structure interactions at the microscale. This paper presents numerical and experimental investigations of flexible buried pipe behaviour with focus placed on load transfer above the buried structure. Numerical modeling was able to reproduce the experimental results. Load repartition was observed, being affected by a number of factors such as particle shape, pipe friction and pipe stiffness.

Słowa kluczowe

  • discrete element method
  • particle shape
  • underground pipe
  • digital image correlation
Otwarty dostęp

Technical Notoe: Prediction of Static Liquefaction by Nor Sand Constitutive Model

Data publikacji: 28 Feb 2015
Zakres stron: 75 - 83

Abstrakt

Abstract

The paper gives a short description of unstable behaviour of saturated sand under undrained monotonic loading. Constitutive model Nor Sand capable to describe static liquefaction is presented. The model is based on critical state soil mechanics and assumes associated flow rule. Hardening law incorporates the state parameter proposed earlier by Been and Jefferies. Results of numerical simulations of undrained element tests have been presented and discussed.

Słowa kluczowe

  • static liquefaction
  • Nor Sand
  • element test simulation

Zaplanuj zdalną konferencję ze Sciendo