Zeszyty czasopisma

Tom 22 (2022): Zeszyt 3 (September 2022)

Tom 22 (2022): Zeszyt 2 (June 2022)

Tom 22 (2022): Zeszyt 1 (March 2022)

Tom 21 (2021): Zeszyt 4 (December 2021)

Tom 21 (2021): Zeszyt 3 (September 2021)

Tom 21 (2021): Zeszyt 2 (June 2021)

Tom 21 (2021): Zeszyt 1 (March 2021)

Tom 20 (2020): Zeszyt 4 (December 2020)

Tom 20 (2020): Zeszyt 3 (September 2020)

Tom 20 (2020): Zeszyt 2 (June 2020)

Tom 20 (2020): Zeszyt 1 (March 2020)

Tom 19 (2019): Zeszyt 4 (December 2019)

Tom 19 (2019): Zeszyt 3 (September 2019)

Tom 19 (2019): Zeszyt 2 (June 2019)

Tom 19 (2019): Zeszyt 1 (March 2019)

Tom 18 (2018): Zeszyt 4 (December 2018)

Tom 18 (2018): Zeszyt 3 (September 2018)

Tom 18 (2018): Zeszyt 2 (June 2018)

Tom 18 (2018): Zeszyt 1 (March 2018)

Tom 17 (2017): Zeszyt 4 (December 2017)

Tom 17 (2017): Zeszyt 3 (September 2017)

Tom 17 (2017): Zeszyt 2 (June 2017)

Tom 17 (2017): Zeszyt 1 (March 2017)

Tom 16 (2016): Zeszyt 4 (December 2016)

Tom 16 (2016): Zeszyt 3 (September 2016)

Tom 16 (2016): Zeszyt 2 (June 2016)

Tom 16 (2016): Zeszyt 1 (March 2016)

Tom 15 (2015): Zeszyt 4 (December 2015)

Tom 15 (2015): Zeszyt 3 (September 2015)

Tom 15 (2015): Zeszyt 2 (June 2015)

Tom 15 (2015): Zeszyt 1 (March 2015)

Tom 14 (2014): Zeszyt 4 (December 2014)

Tom 14 (2014): Zeszyt 3 (September 2014)

Tom 14 (2014): Zeszyt 2 (June 2014)

Tom 14 (2014): Zeszyt 1 (March 2014)

Tom 13 (2013): Zeszyt 4 (December 2013)

Tom 13 (2013): Zeszyt 3 (September 2013)

Tom 13 (2013): Zeszyt 2 (June 2013)

Tom 13 (2013): Zeszyt 1 (March 2013)

Tom 12 (2012): Zeszyt 4 (December 2012)

Tom 12 (2012): Zeszyt 3 (October 2012)

Tom 12 (2012): Zeszyt 2 (June 2012)

Tom 12 (2012): Zeszyt 1 (March 2012)

Tom 11 (2011): Zeszyt 4 (December 2011)

Tom 11 (2011): Zeszyt 3 (September 2011)

Tom 11 (2011): Zeszyt 2 (June 2011)

Tom 11 (2011): Zeszyt 1 (March 2011)

Tom 10 (2010): Zeszyt 4 (December 2010)

Tom 10 (2010): Zeszyt 3 (September 2010)

Tom 10 (2010): Zeszyt 2 (June 2010)

Tom 10 (2010): Zeszyt 1 (March 2010)

Tom 9 (2009): Zeszyt 4 (December 2009)

Tom 9 (2009): Zeszyt 3 (September 2009)

Tom 9 (2009): Zeszyt 2 (June 2009)

Tom 9 (2009): Zeszyt 1 (March 2009)

Tom 8 (2008): Zeszyt 4 (December 2008)

Tom 8 (2008): Zeszyt 3 (September 2008)

Tom 8 (2008): Zeszyt 2 (June 2008)

Tom 8 (2008): Zeszyt 1 (March 2008)

Informacje o czasopiśmie
Format
Czasopismo
eISSN
2083-4799
Pierwsze wydanie
23 Sep 2008
Częstotliwość wydawania
4 razy w roku
Języki
Angielski

Wyszukiwanie

Tom 20 (2020): Zeszyt 2 (June 2020)

Informacje o czasopiśmie
Format
Czasopismo
eISSN
2083-4799
Pierwsze wydanie
23 Sep 2008
Częstotliwość wydawania
4 razy w roku
Języki
Angielski

Wyszukiwanie

7 Artykułów
Otwarty dostęp

Prediction of Magnetic Properties of a Plastically Deformed Steel and One Way to Measure its Plastic Deformation

Data publikacji: 12 Jun 2020
Zakres stron: 5 - 13

Abstrakt

Abstract

In this paper, we use a phenomenological model based on the Jiles-Atherton-Sablik model of stress affecting the magnetic hysteresis of magnetic materials as modified when stress goes past the yield stress We use this to show that (1) the model produces sharp shearing of hysteresis curves, as seen experimentally and that (2) it also produces a step in the hysteresis loss at small residual plastic strain. We also find that the step in the hysteresis loss can be fitted to a power law, and find that the power law can be fitted by the power m=0.270, different from the mechanical Ludwik Law exponent, and reasonably close to the experimental 0.333 and 0.202. We will also suggest a method of measuring how plastically deformed the material is by suggesting how the dislocation density can be measured.

Słowa kluczowe

  • Steel plastic deformation
  • magnetic hysteresis modeling
  • nondestructive evaluation
Otwarty dostęp

Hydrogen Production and Its Storage from Solar Energy

Data publikacji: 12 Jun 2020
Zakres stron: 14 - 25

Abstrakt

Abstract

The aim of this study is to increase the energy efficiency of the solar panel, to make the waste heat generated under the panel efficient and to store the electrical energy produced from solar panels in the form of hydrogen in boron nitride and boron carbide. Characterization of boron nitride and boron carbide was carried out with Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR), differential thermal and thermogravimetric analysis (DTA/TG), Brunauer–Emmett–Teller (BET) and scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM/EDX). The specific surface areas and pore sizes of the boron nitride and boron carbide were determined as 78 and 20 m2/g; and 3.8 and 11.1 nm, respectively. DTA/TG thermograms showed that boron nitride degraded in one step in the temperature range of 30-550°C and boron carbide degraded in two steps. From experimental studies, approximately 8.7% energy efficiency was achieved and hydrogen energy was costless produced from a renewable energy source excluding system costs. Moreover, it was found that 276% and 208% more hydrogen could be stored in the boron compounds, the boron nitride had more hydrogen storage capacity, and the electrical efficiency of the panel was increased.

Słowa kluczowe

  • Solar panel
  • energy
  • hydrogen
  • boron compounds
Otwarty dostęp

Cavitation Erosion and Sliding Wear of MCrAlY and NiCrMo Coatings Deposited by HVOF Thermal Spraying

Data publikacji: 12 Jun 2020
Zakres stron: 26 - 38

Abstrakt

Abstract

The investigation into wear resistance is an up-to-date problem from the point of view of both scientific and engineering practice. In this study, HVOF coatings such as MCrAlY (CoNiCrAlY and NiCoCrAlY) and NiCrMo were deposited on AISI 310 (X15CrNi25-20) stainless steel substrates. The microstructural properties and surface morphology of the as-sprayed coatings were examined. Cavitation erosion tests were conducted using the vibratory method in accordance with the ASTM G32 standard. Sliding wear was examined with the use of a ball-on-disc tribometer, and friction coefficients were measured. The sliding and cavitation wear mechanisms were identified with the SEM-EDS method. In comparison to the NiCrMo coating, the MCrAlY coatings have lower wear resistance. The cavitation erosion resistance of the as-sprayed M(Co,Ni)CrAlY coatings is almost two times lower than that of the as-sprayed NiCrMoFeCo deposit. Moreover, the sliding wear resistance increases with increasing the nickel content as follows: CoNiCrAlY < NiCoCrAlY < NiCrMoFeCo. The mean friction coefficient of CoNiCrAlY coating equals of 0.873, which almost 50% exceed those reported for coating NiCrMoFeCo of 0.573. The as-sprayed NiCrMoFeCo coating presents superior sliding wear and cavitation erosion resistance to the as-sprayed MCrAlY (CoNiCrAlY and NiCoCrAlY) coatings.

Słowa kluczowe

  • HVOF
  • thermal spray
  • coatings
  • MCrAlY
  • NiCrMo
  • cavitation erosion
  • abrasion
  • sliding wear
Otwarty dostęp

Development in PTA Surface Modifications – A Review

Data publikacji: 12 Jun 2020
Zakres stron: 39 - 53

Abstrakt

Abstract

Surface modification is one of the most intensively studied issue of technology, which is related to the almost all branches of industry. Since more than 100 years the huge number of methods has been developed and are still in growth. On this field the plasma transferred arc (PTA) hardfacing and surfacing is one of the most frequently used group of the method. The development of this method is going in three ways: (i) modification of the classic technique and the equipment, (ii) development in new materials, especially with the nanometric size and (iii) replacement dangerous materials (e.g. high cobalt alloys). In the current article the state of the art as well as the development directions of the plasma hardfacing issues are described.

Słowa kluczowe

  • plasma hardfacing
  • surfacing
  • wear resistance
  • erosion resistance
  • corrosion resistance
Otwarty dostęp

Towards the Optimization of Process Parameters for Impact Strength of Natural Fiber Reinforced Composites: Taguchi Method

Data publikacji: 12 Jun 2020
Zakres stron: 54 - 70

Abstrakt

Abstract

This paper presents an investigation of impact strength of sponge gourd, coir, and jute fibers reinforced epoxy resin-based composites. Impact strength of specimens, made of composites with various proportions of wt% ratio of resin and hardener, wt% of resin and hardener, wt% ratio of sponge gourd and jute, wt% ratio of sponge gourd and coir, was measured. Design of experiment was done by Taguchi method using four control factors with three levels. Effect of the above control factors on impact strength was examined and the best combinations of control factors are advised. Confirmation test was performed by using this combination and the percentage of contribution of the above factors on impact strength was investigated by Analysis of Variance (ANOVA). Contour and interaction plots provide helpfully examines to explore the combined influences of different control factors on output characteristics. The regression equation represents a mathematical model that relates control factors with impact strength.

Słowa kluczowe

  • Natural fiber-reinforced composites
  • impact strength
  • Taguchi analysis
  • ANOVA analysis
  • regression analysis
Otwarty dostęp

Effect of Depth Surface Defects in Carbon Fibre Reinforced Composite Material on the Selected Recurrence Quantifications

Data publikacji: 12 Jun 2020
Zakres stron: 71 - 80

Abstrakt

Abstract

The paper discusses the problem of possibility of the detecting surface defects in carbon fibre reinforced plastics (CFRP) materials on the basis of the milling time series. First, the special defects in the hole-shaped with various depth were made. Next, the cutting forces are measured during the milling machining. Finally, the recurrence plot and quantification analysis was applied. The obtained results show that the depth defect influences the selected recurrence quantifications, which can be used as the simple defect indicators. The conducted research allow to determine the percentage share of the detectable defects. The novelty of the work and an unresolved problem is the selection of recurrence quantifications with the simultaneous use of them to detect the size of defects in carbon fibre reinforced plastics.

Słowa kluczowe

  • recurrence quantifications
  • recurrence plots
  • carbon fibre reinforced plastics
  • milling
Otwarty dostęp

Ftir and Raman Spectroscopic Study of a Complex Perovskite: Ca0.91-XCe0.09Rb0.04Csx[(Zr0.50Ti0.45)Al0.05]O3, X=0.2 to 0.4, Dedicated for Radioactive Waste Confinement

Data publikacji: 12 Jun 2020
Zakres stron: 81 - 94

Abstrakt

Abstract

Perovskite is able to sequester simultaneously, in its structure, both actinides and alkaline-earth elements. This study is an attempt to synthesize a complex perovskite Ca0.91-xCe0.09Rb0.04Csx[(Zr0.50Ti0.45)Al0.05]O3 (0.2≤x≤0.4), doped in the same time, with Ce, Cs and Rb. The synthesis is conducted by sintering at 1150°C during 16h. XRX analysis confirms the perovskite formation. SEM observations show a less porous microstructure. FTIR analysis reveals TiO6, Ti-O-Ti, Ti-O and Zr-O vibrations. Raman spectroscopy indicates many orthorhombic perovskite active modes, as: Ti-O6 and Ti-O3 torsions, ZrO7, CaO8 vibrations, the totally symmetric oxygen, and the O-octahedron cage rotation.

Słowa kluczowe

  • perovskite
  • radioactive waste
  • XRD
  • FTIR
  • Raman
7 Artykułów
Otwarty dostęp

Prediction of Magnetic Properties of a Plastically Deformed Steel and One Way to Measure its Plastic Deformation

Data publikacji: 12 Jun 2020
Zakres stron: 5 - 13

Abstrakt

Abstract

In this paper, we use a phenomenological model based on the Jiles-Atherton-Sablik model of stress affecting the magnetic hysteresis of magnetic materials as modified when stress goes past the yield stress We use this to show that (1) the model produces sharp shearing of hysteresis curves, as seen experimentally and that (2) it also produces a step in the hysteresis loss at small residual plastic strain. We also find that the step in the hysteresis loss can be fitted to a power law, and find that the power law can be fitted by the power m=0.270, different from the mechanical Ludwik Law exponent, and reasonably close to the experimental 0.333 and 0.202. We will also suggest a method of measuring how plastically deformed the material is by suggesting how the dislocation density can be measured.

Słowa kluczowe

  • Steel plastic deformation
  • magnetic hysteresis modeling
  • nondestructive evaluation
Otwarty dostęp

Hydrogen Production and Its Storage from Solar Energy

Data publikacji: 12 Jun 2020
Zakres stron: 14 - 25

Abstrakt

Abstract

The aim of this study is to increase the energy efficiency of the solar panel, to make the waste heat generated under the panel efficient and to store the electrical energy produced from solar panels in the form of hydrogen in boron nitride and boron carbide. Characterization of boron nitride and boron carbide was carried out with Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR), differential thermal and thermogravimetric analysis (DTA/TG), Brunauer–Emmett–Teller (BET) and scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM/EDX). The specific surface areas and pore sizes of the boron nitride and boron carbide were determined as 78 and 20 m2/g; and 3.8 and 11.1 nm, respectively. DTA/TG thermograms showed that boron nitride degraded in one step in the temperature range of 30-550°C and boron carbide degraded in two steps. From experimental studies, approximately 8.7% energy efficiency was achieved and hydrogen energy was costless produced from a renewable energy source excluding system costs. Moreover, it was found that 276% and 208% more hydrogen could be stored in the boron compounds, the boron nitride had more hydrogen storage capacity, and the electrical efficiency of the panel was increased.

Słowa kluczowe

  • Solar panel
  • energy
  • hydrogen
  • boron compounds
Otwarty dostęp

Cavitation Erosion and Sliding Wear of MCrAlY and NiCrMo Coatings Deposited by HVOF Thermal Spraying

Data publikacji: 12 Jun 2020
Zakres stron: 26 - 38

Abstrakt

Abstract

The investigation into wear resistance is an up-to-date problem from the point of view of both scientific and engineering practice. In this study, HVOF coatings such as MCrAlY (CoNiCrAlY and NiCoCrAlY) and NiCrMo were deposited on AISI 310 (X15CrNi25-20) stainless steel substrates. The microstructural properties and surface morphology of the as-sprayed coatings were examined. Cavitation erosion tests were conducted using the vibratory method in accordance with the ASTM G32 standard. Sliding wear was examined with the use of a ball-on-disc tribometer, and friction coefficients were measured. The sliding and cavitation wear mechanisms were identified with the SEM-EDS method. In comparison to the NiCrMo coating, the MCrAlY coatings have lower wear resistance. The cavitation erosion resistance of the as-sprayed M(Co,Ni)CrAlY coatings is almost two times lower than that of the as-sprayed NiCrMoFeCo deposit. Moreover, the sliding wear resistance increases with increasing the nickel content as follows: CoNiCrAlY < NiCoCrAlY < NiCrMoFeCo. The mean friction coefficient of CoNiCrAlY coating equals of 0.873, which almost 50% exceed those reported for coating NiCrMoFeCo of 0.573. The as-sprayed NiCrMoFeCo coating presents superior sliding wear and cavitation erosion resistance to the as-sprayed MCrAlY (CoNiCrAlY and NiCoCrAlY) coatings.

Słowa kluczowe

  • HVOF
  • thermal spray
  • coatings
  • MCrAlY
  • NiCrMo
  • cavitation erosion
  • abrasion
  • sliding wear
Otwarty dostęp

Development in PTA Surface Modifications – A Review

Data publikacji: 12 Jun 2020
Zakres stron: 39 - 53

Abstrakt

Abstract

Surface modification is one of the most intensively studied issue of technology, which is related to the almost all branches of industry. Since more than 100 years the huge number of methods has been developed and are still in growth. On this field the plasma transferred arc (PTA) hardfacing and surfacing is one of the most frequently used group of the method. The development of this method is going in three ways: (i) modification of the classic technique and the equipment, (ii) development in new materials, especially with the nanometric size and (iii) replacement dangerous materials (e.g. high cobalt alloys). In the current article the state of the art as well as the development directions of the plasma hardfacing issues are described.

Słowa kluczowe

  • plasma hardfacing
  • surfacing
  • wear resistance
  • erosion resistance
  • corrosion resistance
Otwarty dostęp

Towards the Optimization of Process Parameters for Impact Strength of Natural Fiber Reinforced Composites: Taguchi Method

Data publikacji: 12 Jun 2020
Zakres stron: 54 - 70

Abstrakt

Abstract

This paper presents an investigation of impact strength of sponge gourd, coir, and jute fibers reinforced epoxy resin-based composites. Impact strength of specimens, made of composites with various proportions of wt% ratio of resin and hardener, wt% of resin and hardener, wt% ratio of sponge gourd and jute, wt% ratio of sponge gourd and coir, was measured. Design of experiment was done by Taguchi method using four control factors with three levels. Effect of the above control factors on impact strength was examined and the best combinations of control factors are advised. Confirmation test was performed by using this combination and the percentage of contribution of the above factors on impact strength was investigated by Analysis of Variance (ANOVA). Contour and interaction plots provide helpfully examines to explore the combined influences of different control factors on output characteristics. The regression equation represents a mathematical model that relates control factors with impact strength.

Słowa kluczowe

  • Natural fiber-reinforced composites
  • impact strength
  • Taguchi analysis
  • ANOVA analysis
  • regression analysis
Otwarty dostęp

Effect of Depth Surface Defects in Carbon Fibre Reinforced Composite Material on the Selected Recurrence Quantifications

Data publikacji: 12 Jun 2020
Zakres stron: 71 - 80

Abstrakt

Abstract

The paper discusses the problem of possibility of the detecting surface defects in carbon fibre reinforced plastics (CFRP) materials on the basis of the milling time series. First, the special defects in the hole-shaped with various depth were made. Next, the cutting forces are measured during the milling machining. Finally, the recurrence plot and quantification analysis was applied. The obtained results show that the depth defect influences the selected recurrence quantifications, which can be used as the simple defect indicators. The conducted research allow to determine the percentage share of the detectable defects. The novelty of the work and an unresolved problem is the selection of recurrence quantifications with the simultaneous use of them to detect the size of defects in carbon fibre reinforced plastics.

Słowa kluczowe

  • recurrence quantifications
  • recurrence plots
  • carbon fibre reinforced plastics
  • milling
Otwarty dostęp

Ftir and Raman Spectroscopic Study of a Complex Perovskite: Ca0.91-XCe0.09Rb0.04Csx[(Zr0.50Ti0.45)Al0.05]O3, X=0.2 to 0.4, Dedicated for Radioactive Waste Confinement

Data publikacji: 12 Jun 2020
Zakres stron: 81 - 94

Abstrakt

Abstract

Perovskite is able to sequester simultaneously, in its structure, both actinides and alkaline-earth elements. This study is an attempt to synthesize a complex perovskite Ca0.91-xCe0.09Rb0.04Csx[(Zr0.50Ti0.45)Al0.05]O3 (0.2≤x≤0.4), doped in the same time, with Ce, Cs and Rb. The synthesis is conducted by sintering at 1150°C during 16h. XRX analysis confirms the perovskite formation. SEM observations show a less porous microstructure. FTIR analysis reveals TiO6, Ti-O-Ti, Ti-O and Zr-O vibrations. Raman spectroscopy indicates many orthorhombic perovskite active modes, as: Ti-O6 and Ti-O3 torsions, ZrO7, CaO8 vibrations, the totally symmetric oxygen, and the O-octahedron cage rotation.

Słowa kluczowe

  • perovskite
  • radioactive waste
  • XRD
  • FTIR
  • Raman

Zaplanuj zdalną konferencję ze Sciendo