Zeszyty czasopisma

Tom 22 (2022): Zeszyt 2 (June 2022)

Tom 22 (2022): Zeszyt 1 (March 2022)

Tom 21 (2021): Zeszyt 4 (December 2021)

Tom 21 (2021): Zeszyt 3 (September 2021)

Tom 21 (2021): Zeszyt 2 (June 2021)

Tom 21 (2021): Zeszyt 1 (March 2021)

Tom 20 (2020): Zeszyt 4 (December 2020)

Tom 20 (2020): Zeszyt 3 (September 2020)

Tom 20 (2020): Zeszyt 2 (June 2020)

Tom 20 (2020): Zeszyt 1 (March 2020)

Tom 19 (2019): Zeszyt 4 (December 2019)

Tom 19 (2019): Zeszyt 3 (September 2019)

Tom 19 (2019): Zeszyt 2 (June 2019)

Tom 19 (2019): Zeszyt 1 (March 2019)

Tom 18 (2018): Zeszyt 4 (December 2018)

Tom 18 (2018): Zeszyt 3 (September 2018)

Tom 18 (2018): Zeszyt 2 (June 2018)

Tom 18 (2018): Zeszyt 1 (March 2018)

Tom 17 (2017): Zeszyt 4 (December 2017)

Tom 17 (2017): Zeszyt 3 (September 2017)

Tom 17 (2017): Zeszyt 2 (June 2017)

Tom 17 (2017): Zeszyt 1 (March 2017)

Tom 16 (2016): Zeszyt 4 (December 2016)

Tom 16 (2016): Zeszyt 3 (September 2016)

Tom 16 (2016): Zeszyt 2 (June 2016)

Tom 16 (2016): Zeszyt 1 (March 2016)

Tom 15 (2015): Zeszyt 4 (December 2015)

Tom 15 (2015): Zeszyt 3 (September 2015)

Tom 15 (2015): Zeszyt 2 (June 2015)

Tom 15 (2015): Zeszyt 1 (March 2015)

Tom 14 (2014): Zeszyt 4 (December 2014)

Tom 14 (2014): Zeszyt 3 (September 2014)

Tom 14 (2014): Zeszyt 2 (June 2014)

Tom 14 (2014): Zeszyt 1 (March 2014)

Tom 13 (2013): Zeszyt 4 (December 2013)

Tom 13 (2013): Zeszyt 3 (September 2013)

Tom 13 (2013): Zeszyt 2 (June 2013)

Tom 13 (2013): Zeszyt 1 (March 2013)

Tom 12 (2012): Zeszyt 4 (December 2012)

Tom 12 (2012): Zeszyt 3 (October 2012)

Tom 12 (2012): Zeszyt 2 (June 2012)

Tom 12 (2012): Zeszyt 1 (March 2012)

Tom 11 (2011): Zeszyt 4 (December 2011)

Tom 11 (2011): Zeszyt 3 (September 2011)

Tom 11 (2011): Zeszyt 2 (June 2011)

Tom 11 (2011): Zeszyt 1 (March 2011)

Tom 10 (2010): Zeszyt 4 (December 2010)

Tom 10 (2010): Zeszyt 3 (September 2010)

Tom 10 (2010): Zeszyt 2 (June 2010)

Tom 10 (2010): Zeszyt 1 (March 2010)

Tom 9 (2009): Zeszyt 4 (December 2009)

Tom 9 (2009): Zeszyt 3 (September 2009)

Tom 9 (2009): Zeszyt 2 (June 2009)

Tom 9 (2009): Zeszyt 1 (March 2009)

Tom 8 (2008): Zeszyt 4 (December 2008)

Tom 8 (2008): Zeszyt 3 (September 2008)

Tom 8 (2008): Zeszyt 2 (June 2008)

Tom 8 (2008): Zeszyt 1 (March 2008)

Informacje o czasopiśmie
Format
Czasopismo
eISSN
2083-4799
ISSN
1730-2439
Pierwsze wydanie
23 Sep 2008
Częstotliwość wydawania
4 razy w roku
Języki
Angielski

Wyszukiwanie

Tom 13 (2013): Zeszyt 1 (March 2013)

Informacje o czasopiśmie
Format
Czasopismo
eISSN
2083-4799
ISSN
1730-2439
Pierwsze wydanie
23 Sep 2008
Częstotliwość wydawania
4 razy w roku
Języki
Angielski

Wyszukiwanie

3 Artykułów
access type Otwarty dostęp

Novel Polyurethanes as Antifouling Paint Matrices

Data publikacji: 10 Jul 2013
Zakres stron: 5 - 10

Abstrakt

Abstract

The new poly(ester-ether urethane)s (PEEUR) were prepared in two stage synthesis from formerly obtained oligo(alkylene ester-ether)diols (OAEE) and 4,4‘-diphenylmethane diisocyanate (MDI). PEEUR samples were subjected to crosslinking with styrene in the presence of radical polymerization initiators: methyl ethyl ketone peroxide (MEKPO) or cobalt 2-ethyl cyclohexanoate (EtHCo). Crosslinked PEEUR were characterized by their physicochemical and mechanical properties. Tensile strength of crosslinked PEEURs was in the range 63-29 MPa, hardness values were from 92 to 97°ShA, and glass transition temperature was in the range 59-74°C. For PEEURs filled with biocides tensile strength was in the range 6,8-8,5MPa, hardness values were from 82 to 92°ShA, and glass transition temperature was in the range 57-72°C. Optical microscopic observations showed that the materials obtained were homogeneous in micrometric scale.

Keywords

  • polyurethane
  • antifouling protection
  • unsaturated oligo(alkylene ester-ether)diols
  • poly(esteretherurethane) s
  • styrene crosslinking
access type Otwarty dostęp

Cr/Fe Ratio by Xps Spectra of Magnetoelectropolished Aisi 316L SS Using Linear, Shirley and Tougaard Methods of Background Subtraction

Data publikacji: 10 Jul 2013
Zakres stron: 11 - 20

Abstrakt

Abstract

In the paper, the analyses of Fe2p3/2 and chromium Cr2p3/2 XPS spectra with fitting by symmetrical and asymmetrical line shapes as well as using Linear, Shirley and Tougaard Method of Background Subtraction are presented. The calculations are performed on AISI 316L SS biomaterial after magnetoelectropolishing MEP operation. It was found, the chromium-to-iron ratio after magnetoelectropolishing MEP for other analyses could be in the range from 2.2 to 6.2 depending on the line shapes as well as type of backgrounds used to XPS spectra fitting. The most important for comparison the surface layers concerning the Cr/Fe ratio is to use the same line shape and backgrounds for all analyses.

Keywords

  • XPS spectra fitting
  • Linear
  • Shirley
  • Tougaard Backgrounds
  • 316L SS
  • Magnetoelectropolishing MEP
  • Cr/Fe ratio
access type Otwarty dostęp

Optical Properties of ZnO Thin Film

Data publikacji: 10 Jul 2013
Zakres stron: 21 - 29

Abstrakt

Abstract

In this work, we studied with a Matlab program, some of optical properties of zinc oxide (ZnO) deposited on glass (SiO2). The parameters studied include the refraction index, extinction coefficient, optical band gap, and complex dielectric constant versus incident photon energy, and transmittance, absorbance and reflectance spectrum of ZnO thin film deposited on glass (SiO2) for different thickness. The films were found to exhibit high transmittance (75- 95%), low absorbance and low reflectance in the visible / near infrared region up to 1000 nm. However, the absorbance of the films was found to be high in the ultra violet region with peak around 380 nm.

Keywords

  • ZnO
  • Thin film
  • optical properties
  • Sol gel deposition
  • Matlab
3 Artykułów
access type Otwarty dostęp

Novel Polyurethanes as Antifouling Paint Matrices

Data publikacji: 10 Jul 2013
Zakres stron: 5 - 10

Abstrakt

Abstract

The new poly(ester-ether urethane)s (PEEUR) were prepared in two stage synthesis from formerly obtained oligo(alkylene ester-ether)diols (OAEE) and 4,4‘-diphenylmethane diisocyanate (MDI). PEEUR samples were subjected to crosslinking with styrene in the presence of radical polymerization initiators: methyl ethyl ketone peroxide (MEKPO) or cobalt 2-ethyl cyclohexanoate (EtHCo). Crosslinked PEEUR were characterized by their physicochemical and mechanical properties. Tensile strength of crosslinked PEEURs was in the range 63-29 MPa, hardness values were from 92 to 97°ShA, and glass transition temperature was in the range 59-74°C. For PEEURs filled with biocides tensile strength was in the range 6,8-8,5MPa, hardness values were from 82 to 92°ShA, and glass transition temperature was in the range 57-72°C. Optical microscopic observations showed that the materials obtained were homogeneous in micrometric scale.

Keywords

  • polyurethane
  • antifouling protection
  • unsaturated oligo(alkylene ester-ether)diols
  • poly(esteretherurethane) s
  • styrene crosslinking
access type Otwarty dostęp

Cr/Fe Ratio by Xps Spectra of Magnetoelectropolished Aisi 316L SS Using Linear, Shirley and Tougaard Methods of Background Subtraction

Data publikacji: 10 Jul 2013
Zakres stron: 11 - 20

Abstrakt

Abstract

In the paper, the analyses of Fe2p3/2 and chromium Cr2p3/2 XPS spectra with fitting by symmetrical and asymmetrical line shapes as well as using Linear, Shirley and Tougaard Method of Background Subtraction are presented. The calculations are performed on AISI 316L SS biomaterial after magnetoelectropolishing MEP operation. It was found, the chromium-to-iron ratio after magnetoelectropolishing MEP for other analyses could be in the range from 2.2 to 6.2 depending on the line shapes as well as type of backgrounds used to XPS spectra fitting. The most important for comparison the surface layers concerning the Cr/Fe ratio is to use the same line shape and backgrounds for all analyses.

Keywords

  • XPS spectra fitting
  • Linear
  • Shirley
  • Tougaard Backgrounds
  • 316L SS
  • Magnetoelectropolishing MEP
  • Cr/Fe ratio
access type Otwarty dostęp

Optical Properties of ZnO Thin Film

Data publikacji: 10 Jul 2013
Zakres stron: 21 - 29

Abstrakt

Abstract

In this work, we studied with a Matlab program, some of optical properties of zinc oxide (ZnO) deposited on glass (SiO2). The parameters studied include the refraction index, extinction coefficient, optical band gap, and complex dielectric constant versus incident photon energy, and transmittance, absorbance and reflectance spectrum of ZnO thin film deposited on glass (SiO2) for different thickness. The films were found to exhibit high transmittance (75- 95%), low absorbance and low reflectance in the visible / near infrared region up to 1000 nm. However, the absorbance of the films was found to be high in the ultra violet region with peak around 380 nm.

Keywords

  • ZnO
  • Thin film
  • optical properties
  • Sol gel deposition
  • Matlab

Zaplanuj zdalną konferencję ze Sciendo