Zeszyty czasopisma

Tom 22 (2022): Zeszyt 2 (June 2022)

Tom 22 (2022): Zeszyt 1 (March 2022)

Tom 21 (2021): Zeszyt 4 (December 2021)

Tom 21 (2021): Zeszyt 3 (September 2021)

Tom 21 (2021): Zeszyt 2 (June 2021)

Tom 21 (2021): Zeszyt 1 (March 2021)

Tom 20 (2020): Zeszyt 4 (December 2020)

Tom 20 (2020): Zeszyt 3 (September 2020)

Tom 20 (2020): Zeszyt 2 (June 2020)

Tom 20 (2020): Zeszyt 1 (March 2020)

Tom 19 (2019): Zeszyt 4 (December 2019)

Tom 19 (2019): Zeszyt 3 (September 2019)

Tom 19 (2019): Zeszyt 2 (June 2019)

Tom 19 (2019): Zeszyt 1 (March 2019)

Tom 18 (2018): Zeszyt 4 (December 2018)

Tom 18 (2018): Zeszyt 3 (September 2018)

Tom 18 (2018): Zeszyt 2 (June 2018)

Tom 18 (2018): Zeszyt 1 (March 2018)

Tom 17 (2017): Zeszyt 4 (December 2017)

Tom 17 (2017): Zeszyt 3 (September 2017)

Tom 17 (2017): Zeszyt 2 (June 2017)

Tom 17 (2017): Zeszyt 1 (March 2017)

Tom 16 (2016): Zeszyt 4 (December 2016)

Tom 16 (2016): Zeszyt 3 (September 2016)

Tom 16 (2016): Zeszyt 2 (June 2016)

Tom 16 (2016): Zeszyt 1 (March 2016)

Tom 15 (2015): Zeszyt 4 (December 2015)

Tom 15 (2015): Zeszyt 3 (September 2015)

Tom 15 (2015): Zeszyt 2 (June 2015)

Tom 15 (2015): Zeszyt 1 (March 2015)

Tom 14 (2014): Zeszyt 4 (December 2014)

Tom 14 (2014): Zeszyt 3 (September 2014)

Tom 14 (2014): Zeszyt 2 (June 2014)

Tom 14 (2014): Zeszyt 1 (March 2014)

Tom 13 (2013): Zeszyt 4 (December 2013)

Tom 13 (2013): Zeszyt 3 (September 2013)

Tom 13 (2013): Zeszyt 2 (June 2013)

Tom 13 (2013): Zeszyt 1 (March 2013)

Tom 12 (2012): Zeszyt 4 (December 2012)

Tom 12 (2012): Zeszyt 3 (October 2012)

Tom 12 (2012): Zeszyt 2 (June 2012)

Tom 12 (2012): Zeszyt 1 (March 2012)

Tom 11 (2011): Zeszyt 4 (December 2011)

Tom 11 (2011): Zeszyt 3 (September 2011)

Tom 11 (2011): Zeszyt 2 (June 2011)

Tom 11 (2011): Zeszyt 1 (March 2011)

Tom 10 (2010): Zeszyt 4 (December 2010)

Tom 10 (2010): Zeszyt 3 (September 2010)

Tom 10 (2010): Zeszyt 2 (June 2010)

Tom 10 (2010): Zeszyt 1 (March 2010)

Tom 9 (2009): Zeszyt 4 (December 2009)

Tom 9 (2009): Zeszyt 3 (September 2009)

Tom 9 (2009): Zeszyt 2 (June 2009)

Tom 9 (2009): Zeszyt 1 (March 2009)

Tom 8 (2008): Zeszyt 4 (December 2008)

Tom 8 (2008): Zeszyt 3 (September 2008)

Tom 8 (2008): Zeszyt 2 (June 2008)

Tom 8 (2008): Zeszyt 1 (March 2008)

Informacje o czasopiśmie
Format
Czasopismo
eISSN
2083-4799
Pierwsze wydanie
23 Sep 2008
Częstotliwość wydawania
4 razy w roku
Języki
Angielski

Wyszukiwanie

Tom 14 (2014): Zeszyt 2 (June 2014)

Informacje o czasopiśmie
Format
Czasopismo
eISSN
2083-4799
Pierwsze wydanie
23 Sep 2008
Częstotliwość wydawania
4 razy w roku
Języki
Angielski

Wyszukiwanie

5 Artykułów
access type Otwarty dostęp

Comparative Analysis of Measured and Predicted Shrinkage Strain in Concrete

Data publikacji: 26 Jul 2014
Zakres stron: 5 - 13

Abstrakt

Abstract

The article discusses the issues related to concrete shrinkage. The basic information on the phenomenon is presented as well as the factors that determine the contraction are pointed out and the stages of the process are described. The guidance for estimating the shrinkage strain is given according to Eurocode standard PN-EN 1992-1-1:2008. The results of studies of the samples shrinkage strain of concrete C25/30 are presented with a comparative analysis of the results estimated by the guidelines of the standard according to PN-EN 1992-1- 1:2008

Słowa kluczowe

  • shrinkage
  • shrinkage strain
  • concrete
  • eurocodes
  • experimental test
access type Otwarty dostęp

Rationalisation of Austenite Transformation to Upper or Lower Bainite in Steels

Data publikacji: 26 Jul 2014
Zakres stron: 14 - 23

Abstrakt

Abstract

The paper presents an analytical evaluation of transition temperature from upper to lower bainite in Fe-C-Cr steel. The calculations was based on the model constructed by Matas and Hehemann which involves a comparison between the times needed to precipitate cementite within the bainitic ferrite plates (tθ), with the time required to decarburise supersaturated ferrite plates (td). The transition between upper and lower bainite is found to occur over a narrow range of temperatures (350-410°C) and depends on the thickness of bainitic ferrite laths and the volume fraction of precipitated cementite. On comparing the td and tθ times it was found that the transition temperature from upper to lower bainite reaction (LS) of about 350oC could be predicted if the thickness of bainitic ferrite laths is set as wo = 0.1 μm and volume fraction of cementite is set as ξ = 0.01

Keywords

  • transition temperature
  • bainite transformation
  • lower
  • upper bainite
access type Otwarty dostęp

Solderability of Alsi Foams and AlSi + SiC Composite Foams and the Joints Properties

Data publikacji: 26 Jul 2014
Zakres stron: 24 - 36

Abstrakt

Abstract

The cellular structure and unique properties of aluminum foams are the reason of problems concerning their cutting and bonding. The content of the paper includes characterization of the essence of properties and application of aluminum foams, limitations and chances of aluminum foams soldering. The aim of the research is consideration of possibilities and problems of soldering AlSi foams and AlSi - SiC composite foams as well as mechanical properties. The possibility of soldering AlSi foams and AlSi - SiC composite foams using ZnAl solders was confirmed and higher tensile strength of the joint than the parent material was ascertained

Słowa kluczowe

  • AlSi foams
  • SiC composite foams
  • soldering
  • mechanical properties of soldered joint
access type Otwarty dostęp

Weldability of S500MC Steel in Underwater Conditions

Data publikacji: 26 Jul 2014
Zakres stron: 37 - 45

Abstrakt

Abstract

Wet welding with the use of covered electrodes is one of the methods of underwater welding. This method is the oldest, the most economic and the most versatile. The main difficulties during underwater wet welding are: high cooling rates of the joint, the presence of hydrogen in the arc area and formation of hard martensitic structure in the weld. These phenomena are often accompanied by porosity of welds and large number of spatters, which are more advanced with the increase of water depth. In this paper result of non-destructive tests, hardness tests and metallographic observations of S500MC steel joints performed underwater are presented. The weldability of 500MC steel at water environment was determined

Słowa kluczowe

  • underwater wet welding
  • weldability
  • cold cracking
  • Tekken test
access type Otwarty dostęp

Characterization of Composite Laminates Subjected to Repeated Indentation

Data publikacji: 26 Jul 2014
Zakres stron: 46 - 56

Abstrakt

Abstract

The effect of the fiber orientation in a laminate is investigated experimentally when subjected repeated quasistatic indentation. All the laminates with different fiber orientation are subjected to indentation with a stainless steel spherical indenter of diameter 8.0mm on a universal testing machine for a maximum indenter displacement of 4mm. The rate of indenter displacement was 0.5mm/minute. Different parameters like load bearing capacity, indentation diameter, area of surface damage, etc., were recorded after 4mm of indenter displacement. All the parameters were studied and compared to evaluate the laminate with high strength

Słowa kluczowe

  • epoxy resin
  • e-glass fiber
  • laminate
  • indentation
  • delamination
5 Artykułów
access type Otwarty dostęp

Comparative Analysis of Measured and Predicted Shrinkage Strain in Concrete

Data publikacji: 26 Jul 2014
Zakres stron: 5 - 13

Abstrakt

Abstract

The article discusses the issues related to concrete shrinkage. The basic information on the phenomenon is presented as well as the factors that determine the contraction are pointed out and the stages of the process are described. The guidance for estimating the shrinkage strain is given according to Eurocode standard PN-EN 1992-1-1:2008. The results of studies of the samples shrinkage strain of concrete C25/30 are presented with a comparative analysis of the results estimated by the guidelines of the standard according to PN-EN 1992-1- 1:2008

Słowa kluczowe

  • shrinkage
  • shrinkage strain
  • concrete
  • eurocodes
  • experimental test
access type Otwarty dostęp

Rationalisation of Austenite Transformation to Upper or Lower Bainite in Steels

Data publikacji: 26 Jul 2014
Zakres stron: 14 - 23

Abstrakt

Abstract

The paper presents an analytical evaluation of transition temperature from upper to lower bainite in Fe-C-Cr steel. The calculations was based on the model constructed by Matas and Hehemann which involves a comparison between the times needed to precipitate cementite within the bainitic ferrite plates (tθ), with the time required to decarburise supersaturated ferrite plates (td). The transition between upper and lower bainite is found to occur over a narrow range of temperatures (350-410°C) and depends on the thickness of bainitic ferrite laths and the volume fraction of precipitated cementite. On comparing the td and tθ times it was found that the transition temperature from upper to lower bainite reaction (LS) of about 350oC could be predicted if the thickness of bainitic ferrite laths is set as wo = 0.1 μm and volume fraction of cementite is set as ξ = 0.01

Keywords

  • transition temperature
  • bainite transformation
  • lower
  • upper bainite
access type Otwarty dostęp

Solderability of Alsi Foams and AlSi + SiC Composite Foams and the Joints Properties

Data publikacji: 26 Jul 2014
Zakres stron: 24 - 36

Abstrakt

Abstract

The cellular structure and unique properties of aluminum foams are the reason of problems concerning their cutting and bonding. The content of the paper includes characterization of the essence of properties and application of aluminum foams, limitations and chances of aluminum foams soldering. The aim of the research is consideration of possibilities and problems of soldering AlSi foams and AlSi - SiC composite foams as well as mechanical properties. The possibility of soldering AlSi foams and AlSi - SiC composite foams using ZnAl solders was confirmed and higher tensile strength of the joint than the parent material was ascertained

Słowa kluczowe

  • AlSi foams
  • SiC composite foams
  • soldering
  • mechanical properties of soldered joint
access type Otwarty dostęp

Weldability of S500MC Steel in Underwater Conditions

Data publikacji: 26 Jul 2014
Zakres stron: 37 - 45

Abstrakt

Abstract

Wet welding with the use of covered electrodes is one of the methods of underwater welding. This method is the oldest, the most economic and the most versatile. The main difficulties during underwater wet welding are: high cooling rates of the joint, the presence of hydrogen in the arc area and formation of hard martensitic structure in the weld. These phenomena are often accompanied by porosity of welds and large number of spatters, which are more advanced with the increase of water depth. In this paper result of non-destructive tests, hardness tests and metallographic observations of S500MC steel joints performed underwater are presented. The weldability of 500MC steel at water environment was determined

Słowa kluczowe

  • underwater wet welding
  • weldability
  • cold cracking
  • Tekken test
access type Otwarty dostęp

Characterization of Composite Laminates Subjected to Repeated Indentation

Data publikacji: 26 Jul 2014
Zakres stron: 46 - 56

Abstrakt

Abstract

The effect of the fiber orientation in a laminate is investigated experimentally when subjected repeated quasistatic indentation. All the laminates with different fiber orientation are subjected to indentation with a stainless steel spherical indenter of diameter 8.0mm on a universal testing machine for a maximum indenter displacement of 4mm. The rate of indenter displacement was 0.5mm/minute. Different parameters like load bearing capacity, indentation diameter, area of surface damage, etc., were recorded after 4mm of indenter displacement. All the parameters were studied and compared to evaluate the laminate with high strength

Słowa kluczowe

  • epoxy resin
  • e-glass fiber
  • laminate
  • indentation
  • delamination

Zaplanuj zdalną konferencję ze Sciendo