Zeitschriften und Ausgaben

Volumen 22 (2022): Heft 2 (June 2022)

Volumen 22 (2022): Heft 1 (March 2022)

Volumen 21 (2021): Heft 4 (December 2021)

Volumen 21 (2021): Heft 3 (September 2021)

Volumen 21 (2021): Heft 2 (June 2021)

Volumen 21 (2021): Heft 1 (March 2021)

Volumen 20 (2020): Heft 4 (December 2020)

Volumen 20 (2020): Heft 3 (September 2020)

Volumen 20 (2020): Heft 2 (June 2020)

Volumen 20 (2020): Heft 1 (March 2020)

Volumen 19 (2019): Heft 4 (December 2019)

Volumen 19 (2019): Heft 3 (September 2019)

Volumen 19 (2019): Heft 2 (June 2019)

Volumen 19 (2019): Heft 1 (March 2019)

Volumen 18 (2018): Heft 4 (December 2018)

Volumen 18 (2018): Heft 3 (September 2018)

Volumen 18 (2018): Heft 2 (June 2018)

Volumen 18 (2018): Heft 1 (March 2018)

Volumen 17 (2017): Heft 4 (December 2017)

Volumen 17 (2017): Heft 3 (September 2017)

Volumen 17 (2017): Heft 2 (June 2017)

Volumen 17 (2017): Heft 1 (March 2017)

Volumen 16 (2016): Heft 4 (December 2016)

Volumen 16 (2016): Heft 3 (September 2016)

Volumen 16 (2016): Heft 2 (June 2016)

Volumen 16 (2016): Heft 1 (March 2016)

Volumen 15 (2015): Heft 4 (December 2015)

Volumen 15 (2015): Heft 3 (September 2015)

Volumen 15 (2015): Heft 2 (June 2015)

Volumen 15 (2015): Heft 1 (March 2015)

Volumen 14 (2014): Heft 4 (December 2014)

Volumen 14 (2014): Heft 3 (September 2014)

Volumen 14 (2014): Heft 2 (June 2014)

Volumen 14 (2014): Heft 1 (March 2014)

Volumen 13 (2013): Heft 4 (December 2013)

Volumen 13 (2013): Heft 3 (September 2013)

Volumen 13 (2013): Heft 2 (June 2013)

Volumen 13 (2013): Heft 1 (March 2013)

Volumen 12 (2012): Heft 4 (December 2012)

Volumen 12 (2012): Heft 3 (October 2012)

Volumen 12 (2012): Heft 2 (June 2012)

Volumen 12 (2012): Heft 1 (March 2012)

Volumen 11 (2011): Heft 4 (December 2011)

Volumen 11 (2011): Heft 3 (September 2011)

Volumen 11 (2011): Heft 2 (June 2011)

Volumen 11 (2011): Heft 1 (March 2011)

Volumen 10 (2010): Heft 4 (December 2010)

Volumen 10 (2010): Heft 3 (September 2010)

Volumen 10 (2010): Heft 2 (June 2010)

Volumen 10 (2010): Heft 1 (March 2010)

Volumen 9 (2009): Heft 4 (December 2009)

Volumen 9 (2009): Heft 3 (September 2009)

Volumen 9 (2009): Heft 2 (June 2009)

Volumen 9 (2009): Heft 1 (March 2009)

Volumen 8 (2008): Heft 4 (December 2008)

Volumen 8 (2008): Heft 3 (September 2008)

Volumen 8 (2008): Heft 2 (June 2008)

Volumen 8 (2008): Heft 1 (March 2008)

Zeitschriftendaten
Format
Zeitschrift
eISSN
2083-4799
Erstveröffentlichung
23 Sep 2008
Erscheinungsweise
4 Hefte pro Jahr
Sprachen
Englisch

Suche

Volumen 14 (2014): Heft 2 (June 2014)

Zeitschriftendaten
Format
Zeitschrift
eISSN
2083-4799
Erstveröffentlichung
23 Sep 2008
Erscheinungsweise
4 Hefte pro Jahr
Sprachen
Englisch

Suche

5 Artikel
access type Uneingeschränkter Zugang

Comparative Analysis of Measured and Predicted Shrinkage Strain in Concrete

Online veröffentlicht: 26 Jul 2014
Seitenbereich: 5 - 13

Zusammenfassung

Abstract

The article discusses the issues related to concrete shrinkage. The basic information on the phenomenon is presented as well as the factors that determine the contraction are pointed out and the stages of the process are described. The guidance for estimating the shrinkage strain is given according to Eurocode standard PN-EN 1992-1-1:2008. The results of studies of the samples shrinkage strain of concrete C25/30 are presented with a comparative analysis of the results estimated by the guidelines of the standard according to PN-EN 1992-1- 1:2008

Schlüsselwörter

  • shrinkage
  • shrinkage strain
  • concrete
  • eurocodes
  • experimental test
access type Uneingeschränkter Zugang

Rationalisation of Austenite Transformation to Upper or Lower Bainite in Steels

Online veröffentlicht: 26 Jul 2014
Seitenbereich: 14 - 23

Zusammenfassung

Abstract

The paper presents an analytical evaluation of transition temperature from upper to lower bainite in Fe-C-Cr steel. The calculations was based on the model constructed by Matas and Hehemann which involves a comparison between the times needed to precipitate cementite within the bainitic ferrite plates (tθ), with the time required to decarburise supersaturated ferrite plates (td). The transition between upper and lower bainite is found to occur over a narrow range of temperatures (350-410°C) and depends on the thickness of bainitic ferrite laths and the volume fraction of precipitated cementite. On comparing the td and tθ times it was found that the transition temperature from upper to lower bainite reaction (LS) of about 350oC could be predicted if the thickness of bainitic ferrite laths is set as wo = 0.1 μm and volume fraction of cementite is set as ξ = 0.01

Keywords

  • transition temperature
  • bainite transformation
  • lower
  • upper bainite
access type Uneingeschränkter Zugang

Solderability of Alsi Foams and AlSi + SiC Composite Foams and the Joints Properties

Online veröffentlicht: 26 Jul 2014
Seitenbereich: 24 - 36

Zusammenfassung

Abstract

The cellular structure and unique properties of aluminum foams are the reason of problems concerning their cutting and bonding. The content of the paper includes characterization of the essence of properties and application of aluminum foams, limitations and chances of aluminum foams soldering. The aim of the research is consideration of possibilities and problems of soldering AlSi foams and AlSi - SiC composite foams as well as mechanical properties. The possibility of soldering AlSi foams and AlSi - SiC composite foams using ZnAl solders was confirmed and higher tensile strength of the joint than the parent material was ascertained

Schlüsselwörter

  • AlSi foams
  • SiC composite foams
  • soldering
  • mechanical properties of soldered joint
access type Uneingeschränkter Zugang

Weldability of S500MC Steel in Underwater Conditions

Online veröffentlicht: 26 Jul 2014
Seitenbereich: 37 - 45

Zusammenfassung

Abstract

Wet welding with the use of covered electrodes is one of the methods of underwater welding. This method is the oldest, the most economic and the most versatile. The main difficulties during underwater wet welding are: high cooling rates of the joint, the presence of hydrogen in the arc area and formation of hard martensitic structure in the weld. These phenomena are often accompanied by porosity of welds and large number of spatters, which are more advanced with the increase of water depth. In this paper result of non-destructive tests, hardness tests and metallographic observations of S500MC steel joints performed underwater are presented. The weldability of 500MC steel at water environment was determined

Schlüsselwörter

  • underwater wet welding
  • weldability
  • cold cracking
  • Tekken test
access type Uneingeschränkter Zugang

Characterization of Composite Laminates Subjected to Repeated Indentation

Online veröffentlicht: 26 Jul 2014
Seitenbereich: 46 - 56

Zusammenfassung

Abstract

The effect of the fiber orientation in a laminate is investigated experimentally when subjected repeated quasistatic indentation. All the laminates with different fiber orientation are subjected to indentation with a stainless steel spherical indenter of diameter 8.0mm on a universal testing machine for a maximum indenter displacement of 4mm. The rate of indenter displacement was 0.5mm/minute. Different parameters like load bearing capacity, indentation diameter, area of surface damage, etc., were recorded after 4mm of indenter displacement. All the parameters were studied and compared to evaluate the laminate with high strength

Schlüsselwörter

  • epoxy resin
  • e-glass fiber
  • laminate
  • indentation
  • delamination
5 Artikel
access type Uneingeschränkter Zugang

Comparative Analysis of Measured and Predicted Shrinkage Strain in Concrete

Online veröffentlicht: 26 Jul 2014
Seitenbereich: 5 - 13

Zusammenfassung

Abstract

The article discusses the issues related to concrete shrinkage. The basic information on the phenomenon is presented as well as the factors that determine the contraction are pointed out and the stages of the process are described. The guidance for estimating the shrinkage strain is given according to Eurocode standard PN-EN 1992-1-1:2008. The results of studies of the samples shrinkage strain of concrete C25/30 are presented with a comparative analysis of the results estimated by the guidelines of the standard according to PN-EN 1992-1- 1:2008

Schlüsselwörter

  • shrinkage
  • shrinkage strain
  • concrete
  • eurocodes
  • experimental test
access type Uneingeschränkter Zugang

Rationalisation of Austenite Transformation to Upper or Lower Bainite in Steels

Online veröffentlicht: 26 Jul 2014
Seitenbereich: 14 - 23

Zusammenfassung

Abstract

The paper presents an analytical evaluation of transition temperature from upper to lower bainite in Fe-C-Cr steel. The calculations was based on the model constructed by Matas and Hehemann which involves a comparison between the times needed to precipitate cementite within the bainitic ferrite plates (tθ), with the time required to decarburise supersaturated ferrite plates (td). The transition between upper and lower bainite is found to occur over a narrow range of temperatures (350-410°C) and depends on the thickness of bainitic ferrite laths and the volume fraction of precipitated cementite. On comparing the td and tθ times it was found that the transition temperature from upper to lower bainite reaction (LS) of about 350oC could be predicted if the thickness of bainitic ferrite laths is set as wo = 0.1 μm and volume fraction of cementite is set as ξ = 0.01

Keywords

  • transition temperature
  • bainite transformation
  • lower
  • upper bainite
access type Uneingeschränkter Zugang

Solderability of Alsi Foams and AlSi + SiC Composite Foams and the Joints Properties

Online veröffentlicht: 26 Jul 2014
Seitenbereich: 24 - 36

Zusammenfassung

Abstract

The cellular structure and unique properties of aluminum foams are the reason of problems concerning their cutting and bonding. The content of the paper includes characterization of the essence of properties and application of aluminum foams, limitations and chances of aluminum foams soldering. The aim of the research is consideration of possibilities and problems of soldering AlSi foams and AlSi - SiC composite foams as well as mechanical properties. The possibility of soldering AlSi foams and AlSi - SiC composite foams using ZnAl solders was confirmed and higher tensile strength of the joint than the parent material was ascertained

Schlüsselwörter

  • AlSi foams
  • SiC composite foams
  • soldering
  • mechanical properties of soldered joint
access type Uneingeschränkter Zugang

Weldability of S500MC Steel in Underwater Conditions

Online veröffentlicht: 26 Jul 2014
Seitenbereich: 37 - 45

Zusammenfassung

Abstract

Wet welding with the use of covered electrodes is one of the methods of underwater welding. This method is the oldest, the most economic and the most versatile. The main difficulties during underwater wet welding are: high cooling rates of the joint, the presence of hydrogen in the arc area and formation of hard martensitic structure in the weld. These phenomena are often accompanied by porosity of welds and large number of spatters, which are more advanced with the increase of water depth. In this paper result of non-destructive tests, hardness tests and metallographic observations of S500MC steel joints performed underwater are presented. The weldability of 500MC steel at water environment was determined

Schlüsselwörter

  • underwater wet welding
  • weldability
  • cold cracking
  • Tekken test
access type Uneingeschränkter Zugang

Characterization of Composite Laminates Subjected to Repeated Indentation

Online veröffentlicht: 26 Jul 2014
Seitenbereich: 46 - 56

Zusammenfassung

Abstract

The effect of the fiber orientation in a laminate is investigated experimentally when subjected repeated quasistatic indentation. All the laminates with different fiber orientation are subjected to indentation with a stainless steel spherical indenter of diameter 8.0mm on a universal testing machine for a maximum indenter displacement of 4mm. The rate of indenter displacement was 0.5mm/minute. Different parameters like load bearing capacity, indentation diameter, area of surface damage, etc., were recorded after 4mm of indenter displacement. All the parameters were studied and compared to evaluate the laminate with high strength

Schlüsselwörter

  • epoxy resin
  • e-glass fiber
  • laminate
  • indentation
  • delamination

Planen Sie Ihre Fernkonferenz mit Scienceendo