Zeszyty czasopisma

Tom 66 (2022): Zeszyt 1 (January 2022)

Tom 65 (2021): Zeszyt 4 (December 2021)

Tom 65 (2021): Zeszyt 3 (November 2021)

Tom 65 (2021): Zeszyt 2 (September 2021)

Tom 65 (2021): Zeszyt 1 (May 2021)

Tom 64 (2020): Zeszyt 4 (December 2020)

Tom 64 (2020): Zeszyt 3 (October 2020)

Tom 64 (2020): Zeszyt 2 (June 2020)

Tom 64 (2020): Zeszyt 1 (March 2020)

Tom 63 (2019): Zeszyt 4 (December 2019)

Tom 63 (2019): Zeszyt 3 (November 2019)

Tom 63 (2019): Zeszyt 2 (June 2019)

Tom 63 (2019): Zeszyt 1 (March 2019)

Tom 62 (2018): Zeszyt 4 (December 2018)

Tom 62 (2018): Zeszyt 3 (July 2018)

Tom 62 (2018): Zeszyt 2 (May 2018)

Tom 62 (2018): Zeszyt 1 (February 2018)

Tom 61 (2017): Zeszyt 5 (December 2017)

Tom 61 (2017): Zeszyt 4 (October 2017)

Tom 61 (2017): Zeszyt 3 (July 2017)

Tom 61 (2017): Zeszyt 2 (April 2017)

Tom 61 (2017): Zeszyt 1 (March 2017)

Tom 60 (2016): Zeszyt 5 (December 2016)

Tom 60 (2016): Zeszyt 4 (December 2016)

Tom 60 (2016): Zeszyt 3 (September 2016)

Tom 60 (2016): Zeszyt 2 (June 2016)

Tom 60 (2016): Zeszyt 1 (March 2016)

Tom 59 (2015): Zeszyt 4 (December 2015)

Tom 59 (2015): Zeszyt 3 (November 2015)

Tom 59 (2015): Zeszyt 2 (July 2015)

Tom 59 (2015): Zeszyt 1 (April 2015)

Tom 58 (2014): Zeszyt 4 (December 2014)

Tom 58 (2014): Zeszyt 3 (November 2014)

Tom 58 (2014): Zeszyt 2 (June 2014)

Tom 58 (2014): Zeszyt 1 (March 2014)

Tom 57 (2013): Zeszyt 4 (December 2013)

Tom 57 (2013): Zeszyt 3 (September 2013)

Tom 57 (2013): Zeszyt 2 (June 2013)

Tom 57 (2013): Zeszyt 1 (March 2013)

Tom 56 (2012): Zeszyt 4 (December 2012)

Tom 56 (2012): Zeszyt 3 (October 2012)

Tom 56 (2012): Zeszyt 2 (July 2012)

Tom 56 (2012): Zeszyt 1 (March 2012)

Informacje o czasopiśmie
Format
Czasopismo
eISSN
1804-1213
Pierwsze wydanie
03 Apr 2012
Częstotliwość wydawania
4 razy w roku
Języki
Angielski

Wyszukiwanie

Tom 62 (2018): Zeszyt 1 (February 2018)

Informacje o czasopiśmie
Format
Czasopismo
eISSN
1804-1213
Pierwsze wydanie
03 Apr 2012
Częstotliwość wydawania
4 razy w roku
Języki
Angielski

Wyszukiwanie

5 Artykułów
Otwarty dostęp

Electrodeposition of high entropy alloy coating from water bath

Data publikacji: 16 Feb 2018
Zakres stron: 1 - 5

Abstrakt

Abstract

High entropy alloys (HEAs) have been in focus of scientist for past few years owing to their predicted scratch, corrosion and temperature resistance and also to interesting magnetic properties. They are usually prepared by arc melting of at least 5 pure elements. This article deals with electrodeposition of such five-element alloy from water bath, which have not been yet reported. The HEA coating consisting of Fe, Co, Ni, Mn and Mo or Zn was successfully electrodeposited on steel, copper and other metallic substrates. Substrates were polished and treated by sonication in acetone prior to electrodeposition. Obtained thin layers were documented by optical microscopy and SEM techniques. Their exact composition was determined by EDS and XRF analysis. Scratch and accelerated corrosion tests were performed to asses their resistance properties. Electrochemical properties were determined by measurements of polarization curves.

Otwarty dostęp

Deposition of titanium based coatings by reactive detonation spraying

Data publikacji: 16 Feb 2018
Zakres stron: 6 - 13

Abstrakt

Abstract

The structure and mechanical properties of the coatings formed by reactive detonation spraying of titanium in a wide range of spraying conditions were studied. The variable deposition parameters were the nature of the carrier gas, the spraying distance, the O2/C2H2 ratio, and the volume of the explosive mixture. The phase composition of the coatings and the influence of the spraying parameters on the mechanical properties of the coatings were investigated. In addition, nanohardness of the individual phases contained the coatings was evaluated. It was found that the composition of the strengthening phases in the coatings depends on the O2/C2H2 ratio and the nature of the carrier gas. Detonation spraying conditions ensuring the formation of composite coatings with a set of improved mechanical properties are discussed.

Otwarty dostęp

Evolution of the dicalcium phosphate-dihydrate (DCPD) coating created by large amplitude sinusoidal voltammetry (LASV) on corrosion resistance of the ZW3 magnesium alloy in chloride containing environment

Data publikacji: 16 Feb 2018
Zakres stron: 14 - 18

Abstrakt

Abstract

The contribution is focused on the preparation of coating based on the dicalcium phosphate-dihydrate (DCPD) on the surface of ZW3 magnesium alloy. For the preparation of the coating a cathodic electrodeposition technique called Large Amplitude Sinusoidal Voltammetry (LASV) was used. The DCPD layer was prepared at the temperature of 22 ± 2 °C in electrolyte composed of 0.1M Ca(NO3).4H2O, 0.06 M NH4H2PO4 and H2O2. Electrochemical characteristics were evaluated by electrochemical impedance spectroscopy (EIS) in 0.1M NaCl solution. The obtained data in form of Nyquist plots were analysed by the equivalent circuit method. It is clear from the measured values of polarization resistance Rp that dicalcium phosphate-dihydrate (DCPD) layer prepared by LASV electro-deposition technique improved corrosion resistance of ZW3 alloy in the chosen environment.

Otwarty dostęp

High temperature alloys stability testing in impure helium

Data publikacji: 16 Feb 2018
Zakres stron: 19 - 25

Abstrakt

Abstract

Within the national and international research program of materials for advanced nuclear reactors Czech organizations contributed with several tests of metallic alloys. The specimens of the alloys were first exposed in the long term (up to 1500 hours) in simulated advanced gas cooled reactor coolant environment at 750-900 °C. After exposure the degradation of tested materials was explored, especially changes in material microstructure, corrosion damage and corrosion layer composition and in some cases also changes in mechanical properties were observed. In this paper selected results of exposure tests in high temperature helium of alloy 800 H, austenitic steel 316L and high-temperature nickel alloys are presented.

Otwarty dostęp

Study of triacetate cinematographic films and magnetic audio track by infrared spectroscopy

Data publikacji: 16 Feb 2018
Zakres stron: 26 - 32

Abstrakt

Abstract

Most of the cinematographic film collections stored in film archives are made on a triacetate base, and from the 1950s to the 1980s, a magnetic track was used to record sound. With a large number of archive materials, archives often do not know the chemical composition of film bases, history of use and degradation rates. Therefore, the chemical composition of three films with a magnetic audio track and one representative of the modern film FOMAPAN were investigated by infrared spectroscopy. Selected samples were artificially aged at elevated temperatures and humidity, and the rate of degradation of the film was evaluated by infrared spectroscopy, dimensional changes and gravimetric analysis. Based on the measurements, all of the examined films were made from cellulose triacetate and the binder of the magnetic trackswas cellulose nitrate. To determine the degree of degradation of the binder of the audio track and the triacetate base, a degradation index was created which expresses the ratio of the bandwidths of the characteristic groups in the infrared spectra. It is shown that infrared spectroscopy makes it easy to determine the chemical composition of cinematographic films and to quantify the rate of degradation and the current state of the film base using a suitably chosen degradation index.

5 Artykułów
Otwarty dostęp

Electrodeposition of high entropy alloy coating from water bath

Data publikacji: 16 Feb 2018
Zakres stron: 1 - 5

Abstrakt

Abstract

High entropy alloys (HEAs) have been in focus of scientist for past few years owing to their predicted scratch, corrosion and temperature resistance and also to interesting magnetic properties. They are usually prepared by arc melting of at least 5 pure elements. This article deals with electrodeposition of such five-element alloy from water bath, which have not been yet reported. The HEA coating consisting of Fe, Co, Ni, Mn and Mo or Zn was successfully electrodeposited on steel, copper and other metallic substrates. Substrates were polished and treated by sonication in acetone prior to electrodeposition. Obtained thin layers were documented by optical microscopy and SEM techniques. Their exact composition was determined by EDS and XRF analysis. Scratch and accelerated corrosion tests were performed to asses their resistance properties. Electrochemical properties were determined by measurements of polarization curves.

Otwarty dostęp

Deposition of titanium based coatings by reactive detonation spraying

Data publikacji: 16 Feb 2018
Zakres stron: 6 - 13

Abstrakt

Abstract

The structure and mechanical properties of the coatings formed by reactive detonation spraying of titanium in a wide range of spraying conditions were studied. The variable deposition parameters were the nature of the carrier gas, the spraying distance, the O2/C2H2 ratio, and the volume of the explosive mixture. The phase composition of the coatings and the influence of the spraying parameters on the mechanical properties of the coatings were investigated. In addition, nanohardness of the individual phases contained the coatings was evaluated. It was found that the composition of the strengthening phases in the coatings depends on the O2/C2H2 ratio and the nature of the carrier gas. Detonation spraying conditions ensuring the formation of composite coatings with a set of improved mechanical properties are discussed.

Otwarty dostęp

Evolution of the dicalcium phosphate-dihydrate (DCPD) coating created by large amplitude sinusoidal voltammetry (LASV) on corrosion resistance of the ZW3 magnesium alloy in chloride containing environment

Data publikacji: 16 Feb 2018
Zakres stron: 14 - 18

Abstrakt

Abstract

The contribution is focused on the preparation of coating based on the dicalcium phosphate-dihydrate (DCPD) on the surface of ZW3 magnesium alloy. For the preparation of the coating a cathodic electrodeposition technique called Large Amplitude Sinusoidal Voltammetry (LASV) was used. The DCPD layer was prepared at the temperature of 22 ± 2 °C in electrolyte composed of 0.1M Ca(NO3).4H2O, 0.06 M NH4H2PO4 and H2O2. Electrochemical characteristics were evaluated by electrochemical impedance spectroscopy (EIS) in 0.1M NaCl solution. The obtained data in form of Nyquist plots were analysed by the equivalent circuit method. It is clear from the measured values of polarization resistance Rp that dicalcium phosphate-dihydrate (DCPD) layer prepared by LASV electro-deposition technique improved corrosion resistance of ZW3 alloy in the chosen environment.

Otwarty dostęp

High temperature alloys stability testing in impure helium

Data publikacji: 16 Feb 2018
Zakres stron: 19 - 25

Abstrakt

Abstract

Within the national and international research program of materials for advanced nuclear reactors Czech organizations contributed with several tests of metallic alloys. The specimens of the alloys were first exposed in the long term (up to 1500 hours) in simulated advanced gas cooled reactor coolant environment at 750-900 °C. After exposure the degradation of tested materials was explored, especially changes in material microstructure, corrosion damage and corrosion layer composition and in some cases also changes in mechanical properties were observed. In this paper selected results of exposure tests in high temperature helium of alloy 800 H, austenitic steel 316L and high-temperature nickel alloys are presented.

Otwarty dostęp

Study of triacetate cinematographic films and magnetic audio track by infrared spectroscopy

Data publikacji: 16 Feb 2018
Zakres stron: 26 - 32

Abstrakt

Abstract

Most of the cinematographic film collections stored in film archives are made on a triacetate base, and from the 1950s to the 1980s, a magnetic track was used to record sound. With a large number of archive materials, archives often do not know the chemical composition of film bases, history of use and degradation rates. Therefore, the chemical composition of three films with a magnetic audio track and one representative of the modern film FOMAPAN were investigated by infrared spectroscopy. Selected samples were artificially aged at elevated temperatures and humidity, and the rate of degradation of the film was evaluated by infrared spectroscopy, dimensional changes and gravimetric analysis. Based on the measurements, all of the examined films were made from cellulose triacetate and the binder of the magnetic trackswas cellulose nitrate. To determine the degree of degradation of the binder of the audio track and the triacetate base, a degradation index was created which expresses the ratio of the bandwidths of the characteristic groups in the infrared spectra. It is shown that infrared spectroscopy makes it easy to determine the chemical composition of cinematographic films and to quantify the rate of degradation and the current state of the film base using a suitably chosen degradation index.

Zaplanuj zdalną konferencję ze Sciendo