Numerical Modeling of Wall Pressure in Silo with and Without Insert

[1]Rotter, J.M. 2001, “Guide for The Economic Design Of Circular Metal Silos”, Spon Press, London.RotterJ.M.2001“Guide for The Economic Design Of Circular Metal Silos”Spon PressLondon10.4324/9780203477816Search in Google Scholar

[2]Schulze, D., 2008. Powders and Bulk Solids – Behavior, Characterization Storage and Flow. Springer, Berlin.SchulzeD.2008Powders and Bulk Solids – Behavior, Characterization Storage and FlowSpringerBerlinSearch in Google Scholar

[3]Strusch, J. and Schwedes, J. 1998. “Wall stress distributions in silos with inserts, and loads on inserts”, in: Brown, C.J., Nielsen, J. editors, “Silo Fundamentals of theory, behaviour and design”, E & FN Spon, pp.118–130. London.StruschJ.SchwedesJ.1998“Wall stress distributions in silos with inserts, and loads on inserts”in:BrownC.J.NielsenJ.editors,“Silo Fundamentals of theory, behaviour and design”E & FN Spon118130LondonSearch in Google Scholar

[4]Wójcik, M., Härtl, J., Ooi, J.Y., Rotter, J.M., Ding, S., Enstad, G. 2007. “Experimental Investigation of the Flow Pattern and Wall Pressure Distribution in a Silo with a Double-ConeInsert.” Journal of. Part. Syst. Charact. 24, 2007, pp.296–303.WójcikM.HärtlJ.OoiJ.Y.RotterJ.M.DingS.EnstadG.2007“Experimental Investigation of the Flow Pattern and Wall Pressure Distribution in a Silo with a Double-ConeInsert.”Journal of. Part. Syst. Charact.24200729630310.1002/ppsc.200601120Search in Google Scholar

[5]Härtl, J., Ooi, J.Y., Rotter, J.M., Wojcik, M., Ding, S., Enstad, G.G. 2007. “The influence of a cone-in-cone insert on flow pattern and wall pressure in a full-scale silo”, Journal of chemical engineering research and design 86, 2008, pp. 370–378.HärtlJ.OoiJ.Y.RotterJ.M.WojcikM.DingS.EnstadG.G.2007“The influence of a cone-in-cone insert on flow pattern and wall pressure in a full-scale silo”Journal of chemical engineering research and design86200837037810.1016/j.cherd.2007.07.001Search in Google Scholar

[6]Askifi, F, Hammadeh, H. 2013. “Study the effect of using proposed inserts in silo on flow pattern and wall pressure.” Damascus University, Syria, Vol 29-2, 2013AskifiFHammadehH.2013“Study the effect of using proposed inserts in silo on flow pattern and wall pressure.”Damascus UniversitySyria2922013Search in Google Scholar

[7]Härtl, J., 2008. A Study of Granular Solids in Silos with and without an Insert. The University of Edinburgh (PhDThesis).HärtlJ.2008A Study of Granular Solids in Silos with and without an InsertThe University of Edinburgh(PhDThesis).Search in Google Scholar

[8]Wojcik, M., Tejchman, J. 2008. “Application of an Uncoupled ALE-formulation to Confined Granular Flow in Silos.”, The 12th International Conference of International Association for Computer Methods and Advances in Geomechanics (IACMAG), 1–6 October, 2008, Goa, India.WojcikM.TejchmanJ.2008“Application of an Uncoupled ALE-formulation to Confined Granular Flow in Silos.”The 12th International Conference of International Association for Computer Methods and Advances in Geomechanics (IACMAG)1–6 October, 2008Goa, IndiaSearch in Google Scholar

[9]Wang, Y., Lu, Y., Ooi, J.Y. 2013. “Numerical modelling of dynamic pressure and flow in hopper discharge using the Arbitrary Lagrangian–Eulerian formulation.” Journal of Engineering Structures 56, pp. 1308–1320.WangY.LuY.OoiJ.Y.2013“Numerical modelling of dynamic pressure and flow in hopper discharge using the Arbitrary Lagrangian–Eulerian formulation.”Journal of Engineering Structures561308132010.1016/j.engstruct.2013.07.006Search in Google Scholar

[10]Artoni, R., Santomaso, A., Canu, P. 2009. “Simulation of dense granular flows: Dynamics of wall stress in silos.” Journal of chemical engineering Science 64, 2009, pp 4040–4050.ArtoniR.SantomasoA.CanuP.2009“Simulation of dense granular flows: Dynamics of wall stress in silos.”Journal of chemical engineering Science6420094040405010.1016/j.ces.2009.06.008Search in Google Scholar

[11]Artoni, R., Zugliano, A., Primavera, A., Canu, P., Santomaso, A. 2011. “Simulation of dense granular flows: Comparison with experiments.” Journal of Chemical Engineering Science 66, 2011, pp. 548–557.ArtoniR.ZuglianoA.PrimaveraA.CanuP.SantomasoA.2011“Simulation of dense granular flows: Comparison with experiments.”Journal of Chemical Engineering Science66201154855710.1016/j.ces.2010.11.029Search in Google Scholar

[12]Silvia Volpato, S., Artoni, R., Santomaso, A. 2013. “Numerical study on the behavior of funnel flow silos with and without inserts through a continuum hydrodynamic approach.” Journal of chemical engineering research and design, 2013.Silvia VolpatoS.ArtoniR.SantomasoA.2013“Numerical study on the behavior of funnel flow silos with and without inserts through a continuum hydrodynamic approach.”Journal of chemical engineering research and design2013Search in Google Scholar

[13]Rombach, G.A., Neumann, F. “3-D Finite Element Modelling of Granular Flow in Silos”, The 17th ASCE Engineering Mechanics Conference, June 13–16, 2004, University of Delaware, Newark, DE.RombachG.A.NeumannF.“3-D Finite Element Modelling of Granular Flow in Silos”The 17th ASCE Engineering Mechanics ConferenceJune 13–16, 2004University of Delaware, Newark, DESearch in Google Scholar

[14]ABAQUS version 6.12-1. Dassault Systemes Simulia Corp., USA.ABAQUS version 6.12-1Dassault Systemes Simulia Corp.USASearch in Google Scholar

[15]Wojcik, M., Tejchman, J. 2007. “Numerical Simulations of Granular Material Flow In Silos with and without Insert.”, Archives of Civil Engineering. LIII.2.2007, pp. 293–322.WojcikM.TejchmanJ.2007“Numerical Simulations of Granular Material Flow In Silos with and without Insert.”Archives of Civil EngineeringLIII22007293322Search in Google Scholar

[16]Chen, J.F., Ooi, J.Y., Rotter, J.M., Batikha, M., Zhong, Z., Andreasson, B., Forsmo, S.E., Tano, K., Horrigmoe, G. 2007. “Finite element analysis of solid stresses in a silo with an inner tube”, University of Edinburgh.ChenJ.F.OoiJ.Y.RotterJ.M.BatikhaM.ZhongZ.AndreassonB.ForsmoS.E.TanoK.HorrigmoeG.2007“Finite element analysis of solid stresses in a silo with an inner tube”University of EdinburghSearch in Google Scholar

[17]Wojcik, M., Tejchman, J., Enstad, G.G. 2012. “Confined granular flow in silos with inserts — Full-scale experiments.”, Journal of Powder Technology 222, 2012, pp. 15–36WojcikM.TejchmanJ.EnstadG.G.2012“Confined granular flow in silos with inserts — Full-scale experiments.”Journal of Powder Technology2222012153610.1016/j.powtec.2012.01.031Search in Google Scholar

[18]Yang, Y., Ooi, J., Rotter, M., Wang, Y. 2011. “Numerical analysis of silo behavior using non-coaxial models.” Journal of chemical engineering Science 66, 2011, pp 1715–1727.YangY.OoiJ.RotterM.WangY.2011“Numerical analysis of silo behavior using non-coaxial models.”Journal of chemical engineering Science6620111715172710.1016/j.ces.2011.01.012Search in Google Scholar

[19]Johanson, J.R., Kleysteuber, K. 1996. “Flow corrective inserts in bin.” Chemical engineerin gprogress 62, 11, pp. 79–83JohansonJ.R.KleysteuberK.1996“Flow corrective inserts in bin.”Chemical engineerin gprogress62117983Search in Google Scholar

[20]Tuzun, U., Neddermaan, R,M,. 1983. “Flow of granular materials round obstacles.” Bulk solids handling, 3. pp 503–517.TuzunU.NeddermaanR,M,1983“Flow of granular materials round obstacles.”Bulk solids handling3503517Search in Google Scholar

[21]Karlsson, S., Klisinski, M., Runesson, K., 1998. “Finite element simulations of granular flow in plane silos with complicated geometry.” Powder Technology, 99, pp 29–39.KarlssonS.KlisinskiM.RunessonK.1998“Finite element simulations of granular flow in plane silos with complicated geometry.”Powder Technology99293910.1016/S0032-5910(98)00087-4Search in Google Scholar

[22]Wieckowski, Z., 2002. “The dynamic analysis of large strain problems by the material point.” Proc. Of the fifth World Congress Computational Mechanics (WCCM-V), Vienna, Austria.WieckowskiZ.2002“The dynamic analysis of large strain problems by the material point.”Proc. Of the fifth World Congress Computational Mechanics (WCCM-V)Vienna, AustriaSearch in Google Scholar

[23]Rombach G, Eibl J., 1998.” A dynamic finite element model for silo pressure and solids flow. “. In: Brown CJ, Nielsen J, editors. Silos, “fundamentals of theory behaviour and design.” E&FN SPON; pp. 481–94.RombachGEiblJ.1998“A dynamic finite element model for silo pressure and solids flow.”In:BrownCJNielsenJeditors.Silos, “fundamentals of theory behaviour and design.”E&FN SPON4819410.4324/9780203223512_chapter_26Search in Google Scholar

[24]Martinez MA, Alfaro I, Doblare M., 2002. “Simulation of axisymmetric discharging in metallic silos: analysis of the induced pressure distribution and comparison with different standards.” Eng Struct 24: pp. 1561–1574.MartinezMAAlfaroIDoblareM.2002“Simulation of axisymmetric discharging in metallic silos: analysis of the induced pressure distribution and comparison with different standards.”Eng Struct241561157410.1016/S0141-0296(02)00100-1Search in Google Scholar

[25]Vidal P, Guaita M, Ayuga F., 2005. “Analysis of dynamic discharge pressures in cylindrical slender silos with a flat bottom or with a hopper: comparison with Eurocode 1.” Biosyst Eng; 91(3). pp. 335–348.VidalPGuaitaMAyugaF.2005“Analysis of dynamic discharge pressures in cylindrical slender silos with a flat bottom or with a hopper: comparison with Eurocode 1.”Biosyst Eng91333534810.1016/j.biosystemseng.2005.03.012Search in Google Scholar

[26]Hammadeh H, Askifi F., Ubysz A., Maj M., Zeno A., 2019.”Effect of using insert on the flow pressure in cylindrical silo.” Studia Geotechnica et Mechanica; 41 (4), pp.177–183.HammadehHAskifiF.UbyszA.MajM.ZenoA.2019“Effect of using insert on the flow pressure in cylindrical silo.”Studia Geotechnica et Mechanica41417718310.2478/sgem-2019-0022Search in Google Scholar

[27]Donea J, Huerta A., 2003. “Finite Element Methods for Flow Problems.” John Wiley & Sons Ltd, The Atrium, Southern Gate., England.DoneaJHuertaA.2003“Finite Element Methods for Flow Problems.”John Wiley & Sons LtdThe Atrium, Southern Gate., England10.1002/0470013826Search in Google Scholar

[28]Y. Wang, Y. Lu, J.Y. Ooi, 2015. “A numerical study of wall pressure and granular flow in a flat-bottomed silo”, Powder Technol. 282, pp. 43–54WangY.LuY.OoiJ.Y.2015“A numerical study of wall pressure and granular flow in a flat-bottomed silo”Powder Technol.282435410.1016/j.powtec.2015.01.078Search in Google Scholar

[29]R.J. Goodey, Brown, C.J., Rotter, J.M. 2017. “Rectangular steel silos: Finite element predictions of filling wall pressures”. Engineering Structures, 132, pp. 61–69.GoodeyR.J.BrownC.J.RotterJ.M.2017“Rectangular steel silos: Finite element predictions of filling wall pressures”Engineering Structures132616910.1016/j.engstruct.2016.11.023Search in Google Scholar