Identification of residual force in static load tests on instrumented screw displacement piles

[1] Cooke R.W. (1979). Influence of residual installations forces on the stress transfer and settlement under working loads of jacked and bored piles in cohesive soils. Behaviour of deep foundations. American Society for Testing and Materials, 231–249. CookeR.W. 1979 Influence of residual installations forces on the stress transfer and settlement under working loads of jacked and bored piles in cohesive soils. Behaviour of deep foundations American Society for Testing and Materials 231 249 10.1520/STP33731S Search in Google Scholar

[2] Fellenius B.H., Brusey W.G., Pepe F. (2000). Soil set-up, variable concrete modulus and residual load for tapered instrumented pile in sand. ASCE Specialty Conference on Performance Confirmation of Constructed Geotechnical Facilities, ASCE GSP, 94. FelleniusB.H. BruseyW.G. PepeF. 2000 Soil set-up, variable concrete modulus and residual load for tapered instrumented pile in sand ASCE Specialty Conference on Performance Confirmation of Constructed Geotechnical Facilities, ASCE GSP 94 10.1061/40486(300)6 Search in Google Scholar

[3] Fellenius B.H. (2001). From strain measurements to load in an instrumented pile. Geotechnical New Magazine, 96, 1629–1653. FelleniusB.H. 2001 From strain measurements to load in an instrumented pile Geotechnical New Magazine 96 1629 1653 Search in Google Scholar

[4] Fellenius B.H. (2002a). Determining the Resistance Distribution in Piles. Part 1: Notes on Shift of No-Load Reading and Residual Load. Geotechnical News Magazine, 20(2), 35–38. FelleniusB.H. 2002a Determining the Resistance Distribution in Piles. Part 1: Notes on Shift of No-Load Reading and Residual Load Geotechnical News Magazine 20 2 35 38 Search in Google Scholar

[5] Fellenius B.H. (2002b). Determining the Resistance Distribution in Piles. Part 2: Method for Determining the Residual Load. Geotechnical News Magazine, 20(3), 25–29. FelleniusB.H. 2002b Determining the Resistance Distribution in Piles. Part 2: Method for Determining the Residual Load Geotechnical News Magazine 20 3 25 29 Search in Google Scholar

[6] Fellenius B.H. (2002c). Determining the true distribution of load in instrumented piles. ASCE Int. Deep Foundation Congress, Orlando, USA. FelleniusB.H. 2002c Determining the true distribution of load in instrumented piles ASCE Int. Deep Foundation Congress Orlando, USA 10.1061/40601(256)104 Search in Google Scholar

[7] Fellenius B.H. (2015). Static tests on instrumented piles affected by residual load. Journal of the Deep Foundation Institute, 9(1), 11–20. FelleniusB.H. 2015 Static tests on instrumented piles affected by residual load Journal of the Deep Foundation Institute 9 1 11 20 10.1179/1937525515Y.0000000001 Search in Google Scholar

[8] Fellenius B.H. (1989). Tangent modulus of piles determined from strain data. The ASCE Geotechnical Engineering Division, Foundation Congress, 1, 500–510. FelleniusB.H. 1989 Tangent modulus of piles determined from strain data The ASCE Geotechnical Engineering Division, Foundation Congress 1 500 510 Search in Google Scholar

[9] Hayes J., Simmonds T. (2002). Interpreting strain measurements from load tests in bored piles. Conf Proc. Conference on Piling and Deep Foundations, Nice, France. HayesJ. SimmondsT. 2002 Interpreting strain measurements from load tests in bored piles Conf Proc. Conference on Piling and Deep Foundations Nice, France Search in Google Scholar

[10] Kania J.G., Sørensen K.K. (2018). A Static Pile Load Test on a Bored Pile Instrumented with Distributed Fibre Optic Sensors. Conf Proc. 10th International Symposium On Field Measurements In Geomechanics. Rio de Janeiro, Brazil. KaniaJ.G. SørensenK.K. 2018 A Static Pile Load Test on a Bored Pile Instrumented with Distributed Fibre Optic Sensors Conf Proc. 10th International Symposium On Field Measurements In Geomechanics Rio de Janeiro, Brazil Search in Google Scholar

[11] Kania J.G., Sørensen K.K., Fellenius B.H. (2020). Analysis of a Static Loading Test on an Instrumented Cased CFA Pile in Silt and Sand. International Journal of Geoengineering Case Histories, 5(3), 170–181. KaniaJ.G. SørensenK.K. FelleniusB.H. 2020 Analysis of a Static Loading Test on an Instrumented Cased CFA Pile in Silt and Sand International Journal of Geoengineering Case Histories 5 3 170 181 Search in Google Scholar

[12] Kim M.G., Cavusoglu E., O’Neill M.W., Robert T., Yin S. (2004). Residual Load Development in ACIP piles in a Bridge Foundation. Conf Proc. GeoSupport, Orlando, USA. KimM.G. CavusogluE. O’NeillM.W. RobertT. YinS. 2004 Residual Load Development in ACIP piles in a Bridge Foundation Conf Proc. GeoSupport Orlando, USA 10.1061/40713(2004)18 Search in Google Scholar

[13] Krasiński A. (2012). Problematyka interpretacji pomiarów rozkładu siły osiowej w trzonie pala podczas próbnych obciążeń statycznych (Interpretation problems of the distribution of axial force in the piles during static load tests), Inżynieria Morska i Geotechnika, 2, 118–124. KrasińskiA. 2012 Problematyka interpretacji pomiarów rozkładu siły osiowej w trzonie pala podczas próbnych obciążeń statycznych (Interpretation problems of the distribution of axial force in the piles during static load tests) Inżynieria Morska i Geotechnika 2 118 124 Search in Google Scholar

[14] Lunne, T., Robertson, P.K., Powell, J.J.M. (1997). Cone penetration testing in geotechnical practice. Blackie Academic, EF Spon/Taylor & Francis Publ., New York, 1997, 312 pp. LunneT. RobertsonP.K. PowellJ.J.M. 1997 Cone penetration testing in geotechnical practice Blackie Academic, EF Spon/Taylor & Francis Publ. New York 1997 312 pp. Search in Google Scholar

[15] Maertens J., Huybrechts N. (2003). Belgian screw pile technology. Design and recent developments. Swets & Zeitlinger. MaertensJ. HuybrechtsN. 2003 Belgian screw pile technology. Design and recent developments Swets & Zeitlinger 10.1201/9781003078869 Search in Google Scholar

[16] Robertson, P.K. (1990). Soil classification using the cone penetration test. Canadian Geotechnical Journal, 27(1): 151–158. RobertsonP.K. 1990 Soil classification using the cone penetration test Canadian Geotechnical Journal 27 1 151 158 10.1139/t90-014 Search in Google Scholar

[17] Sahajda K. (2015). Siły rezydualne w ocenie nośności i osiadań żelbetowych pali wbijanych (Residual forces in the assessment of bearing capacity and settlement of reinforced concrete driven piles), PhD Thesis. Warsaw University of Technology, Poland. SahajdaK. 2015 Siły rezydualne w ocenie nośności i osiadań żelbetowych pali wbijanych (Residual forces in the assessment of bearing capacity and settlement of reinforced concrete driven piles) PhD Thesis. Warsaw University of Technology Poland Search in Google Scholar

[18] Siegel T.C., McGillivray A. (2010). Interpreted residual load in an augered cast-in-place pile. Conf Proc. 35th Annual DFI Conference. Hollywood, USA. SiegelT.C. McGillivrayA. 2010 Interpreted residual load in an augered cast-in-place pile Conf Proc. 35th Annual DFI Conference Hollywood, USA Search in Google Scholar

[19] Sieńko R., Zych M., Bednarski Ł., Howiacki T. (2019). Strain and crack analysis within concrete members using distributed fibre optic sensors. Structural Health Monitoring, 18(5–6), 1510–1526. SieńkoR. ZychM. BednarskiŁ. HowiackiT. 2019 Strain and crack analysis within concrete members using distributed fibre optic sensors Structural Health Monitoring 18 5–6 1510 1526 10.1177/1475921718804466 Search in Google Scholar

[20] Van Impe P.O., Van Impe W.F., Seminck L. (2013). Results of an instrumented screw pile load test and connected pile-group load-settlement behavior. Journal of Geo-Engineering Sciences, 1(1), 13–36. Van ImpeP.O. Van ImpeW.F. SeminckL. 2013 Results of an instrumented screw pile load test and connected pile-group load-settlement behavior Journal of Geo-Engineering Sciences 1 1 13 36 10.3233/JGS-130011 Search in Google Scholar