This work is licensed under the Creative Commons Attribution 4.0 International License.
Cooke R.W. (1979). Influence of residual installations forces on the stress transfer and settlement under working loads of jacked and bored piles in cohesive soils. Behaviour of deep foundations. American Society for Testing and Materials, 231–249.CookeR.W.1979Influence of residual installations forces on the stress transfer and settlement under working loads of jacked and bored piles in cohesive soils. Behaviour of deep foundations23124910.1520/STP33731SSearch in Google Scholar
Fellenius B.H., Brusey W.G., Pepe F. (2000). Soil set-up, variable concrete modulus and residual load for tapered instrumented pile in sand. ASCE Specialty Conference on Performance Confirmation of Constructed Geotechnical Facilities, ASCE GSP, 94.FelleniusB.H.BruseyW.G.PepeF.2000ASCE Specialty Conference on Performance Confirmation of Constructed Geotechnical Facilities, ASCE GSP9410.1061/40486(300)6Search in Google Scholar
Fellenius B.H. (2001). From strain measurements to load in an instrumented pile. Geotechnical New Magazine, 96, 1629–1653.FelleniusB.H.2001From strain measurements to load in an instrumented pile9616291653Search in Google Scholar
Fellenius B.H. (2002a). Determining the Resistance Distribution in Piles. Part 1: Notes on Shift of No-Load Reading and Residual Load. Geotechnical News Magazine, 20(2), 35–38.FelleniusB.H.2002aDetermining the Resistance Distribution in Piles. Part 1: Notes on Shift of No-Load Reading and Residual Load2023538Search in Google Scholar
Fellenius B.H. (2002b). Determining the Resistance Distribution in Piles. Part 2: Method for Determining the Residual Load. Geotechnical News Magazine, 20(3), 25–29.FelleniusB.H.2002bDetermining the Resistance Distribution in Piles. Part 2: Method for Determining the Residual Load2032529Search in Google Scholar
Fellenius B.H. (2002c). Determining the true distribution of load in instrumented piles. ASCE Int. Deep Foundation Congress, Orlando, USA.FelleniusB.H.2002cASCE Int. Deep Foundation CongressOrlando, USA10.1061/40601(256)104Search in Google Scholar
Fellenius B.H. (2015). Static tests on instrumented piles affected by residual load. Journal of the Deep Foundation Institute, 9(1), 11–20.FelleniusB.H.2015Static tests on instrumented piles affected by residual load91112010.1179/1937525515Y.0000000001Search in Google Scholar
Fellenius B.H. (1989). Tangent modulus of piles determined from strain data. The ASCE Geotechnical Engineering Division, Foundation Congress, 1, 500–510.FelleniusB.H.1989Tangent modulus of piles determined from strain data1500510Search in Google Scholar
Hayes J., Simmonds T. (2002). Interpreting strain measurements from load tests in bored piles. Conf Proc. Conference on Piling and Deep Foundations, Nice, France.HayesJ.SimmondsT.2002Conf Proc. Conference on Piling and Deep FoundationsNice, FranceSearch in Google Scholar
Kania J.G., Sørensen K.K. (2018). A Static Pile Load Test on a Bored Pile Instrumented with Distributed Fibre Optic Sensors. Conf Proc. 10th International Symposium On Field Measurements In Geomechanics. Rio de Janeiro, Brazil.KaniaJ.G.SørensenK.K.2018Conf Proc. 10th International Symposium On Field Measurements In GeomechanicsRio de Janeiro, BrazilSearch in Google Scholar
Kania J.G., Sørensen K.K., Fellenius B.H. (2020). Analysis of a Static Loading Test on an Instrumented Cased CFA Pile in Silt and Sand. International Journal of Geoengineering Case Histories, 5(3), 170–181.KaniaJ.G.SørensenK.K.FelleniusB.H.2020Analysis of a Static Loading Test on an Instrumented Cased CFA Pile in Silt and Sand53170181Search in Google Scholar
Kim M.G., Cavusoglu E., O’Neill M.W., Robert T., Yin S. (2004). Residual Load Development in ACIP piles in a Bridge Foundation. Conf Proc. GeoSupport, Orlando, USA.KimM.G.CavusogluE.O’NeillM.W.RobertT.YinS.2004Conf Proc. GeoSupportOrlando, USA10.1061/40713(2004)18Search in Google Scholar
Krasiński A. (2012). Problematyka interpretacji pomiarów rozkładu siły osiowej w trzonie pala podczas próbnych obciążeń statycznych (Interpretation problems of the distribution of axial force in the piles during static load tests), Inżynieria Morska i Geotechnika, 2, 118–124.KrasińskiA.2012Problematyka interpretacji pomiarów rozkładu siły osiowej w trzonie pala podczas próbnych obciążeń statycznych (Interpretation problems of the distribution of axial force in the piles during static load tests)2118124Search in Google Scholar
Lunne, T., Robertson, P.K., Powell, J.J.M. (1997). Cone penetration testing in geotechnical practice. Blackie Academic, EF Spon/Taylor & Francis Publ., New York, 1997, 312 pp.LunneT.RobertsonP.K.PowellJ.J.M.1997Blackie Academic, EF Spon/Taylor & Francis Publ.New York1997312 pp.Search in Google Scholar
Maertens J., Huybrechts N. (2003). Belgian screw pile technology. Design and recent developments. Swets & Zeitlinger.MaertensJ.HuybrechtsN.2003Belgian screw pile technology. Design and recent developments10.1201/9781003078869Search in Google Scholar
Robertson, P.K. (1990). Soil classification using the cone penetration test. Canadian Geotechnical Journal, 27(1): 151–158.RobertsonP.K.1990Soil classification using the cone penetration test27115115810.1139/t90-014Search in Google Scholar
Sahajda K. (2015). Siły rezydualne w ocenie nośności i osiadań żelbetowych pali wbijanych (Residual forces in the assessment of bearing capacity and settlement of reinforced concrete driven piles), PhD Thesis. Warsaw University of Technology, Poland.SahajdaK.2015PhD Thesis.Warsaw University of TechnologyPolandSearch in Google Scholar
Siegel T.C., McGillivray A. (2010). Interpreted residual load in an augered cast-in-place pile. Conf Proc. 35th Annual DFI Conference. Hollywood, USA.SiegelT.C.McGillivrayA.2010Conf Proc. 35th Annual DFI ConferenceHollywood, USASearch in Google Scholar
Sieńko R., Zych M., Bednarski Ł., Howiacki T. (2019). Strain and crack analysis within concrete members using distributed fibre optic sensors. Structural Health Monitoring, 18(5–6), 1510–1526.SieńkoR.ZychM.BednarskiŁ.HowiackiT.2019Strain and crack analysis within concrete members using distributed fibre optic sensors185–61510152610.1177/1475921718804466Search in Google Scholar
Van Impe P.O., Van Impe W.F., Seminck L. (2013). Results of an instrumented screw pile load test and connected pile-group load-settlement behavior. Journal of Geo-Engineering Sciences, 1(1), 13–36.Van ImpeP.O.Van ImpeW.F.SeminckL.2013Results of an instrumented screw pile load test and connected pile-group load-settlement behavior11133610.3233/JGS-130011Search in Google Scholar