Otwarty dostęp

Numerical Comparison of Thermal Behaviour Between Ventilated Facades

Krzysztof Schabowicz

Krzysztof Schabowicz

Wrocław University of Science and Technology, Faculty of Civil Engineering, Department of Construction TechnologyWrocław, Poland
Profil Orcid
Wyszukaj tego autora
Sciendo|Google Scholar
Schabowicz, Krzysztof
 oraz 
Łukasz Zawiślak

Łukasz Zawiślak

Wrocław University of Science and Technology, Faculty of Civil Engineering, Department of Construction TechnologyWrocław, Poland
Wyszukaj tego autora
Sciendo|Google Scholar
Zawiślak, Łukasz
  
20 maj 2020
Numerical Comparison of Thermal Behaviour Between Ventilated Facades's Cover Image
O artykule
Poprzedni artykuł
Następny artykuł
Zacytuj
Pobierz okładkę
Kategoria artykułu: Original Study
Data publikacji: 20 maj 2020
Zakres stron: 297 - 305
Otrzymano: 18 lut 2020
Przyjęty: 23 mar 2020
DOI: https://doi.org/10.2478/sgem-2019-0044
Słowa kluczowe
© 2020 Krzysztof Schabowicz et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Figure 1

Final energy consumption by sectors (%) [13].
Final energy consumption by sectors (%) [13].

Figure 2

Final energy consumption by sector (million tonnes of oil equivalent) [13].
Final energy consumption by sector (million tonnes of oil equivalent) [13].

Figure 3

Types of ventilated facades: (a) open joint and (b) closed joint [14].
Types of ventilated facades: (a) open joint and (b) closed joint [14].

Figure 4

Facade diagrams for numerical simulations: (a) standard facade, (b) closed-joint ventilated facade and (c) open-joint ventilated facade.
Facade diagrams for numerical simulations: (a) standard facade, (b) closed-joint ventilated facade and (c) open-joint ventilated facade.

Figure 5

Numerical model of the closed-joint ventilated facade.
Numerical model of the closed-joint ventilated facade.

Figure 6

Temperature distribution maps of the facade obtained during numerical simulation: (a) standard facade, (b) closed-joint ventilated facade and (c) open-joint ventilated facade.
Temperature distribution maps of the facade obtained during numerical simulation: (a) standard facade, (b) closed-joint ventilated facade and (c) open-joint ventilated facade.

Figure 7

Location of temperature measurement points: (a) standard facade, (b) closed-joint ventilated facade and (c) open-joint ventilated facade.
Location of temperature measurement points: (a) standard facade, (b) closed-joint ventilated facade and (c) open-joint ventilated facade.

Chart 1

Temperature overview for the control points of the individual types of facade.
Temperature overview for the control points of the individual types of facade.

Characteristic values of temperature_

P1P3P7P10/P17P11/P14/P20
LocalisationStarting point40 cm from the wallInternal edge of theAir cavityExternal edge of
Standard facade293.15 K (20°C)100%319.07 K (45.92°C)100%342.73 K (69.58°C)100%--341.51 K (68.36°C)100%
Closed-joint ventilated facade293.15 K (20°C)100%303.96 K (30.81°C)95,3%315.34 K (42.19°C)92.0%313.81 K (40.66°C)99.3%340.93 K (67.78°C)99.8%
Open-joint ventilated facade293.15 K (20°C)100%303.55 K (30.40°C)95,1%313.91 K (40.76°C)91.6%316.02 K (42.87°C)100%338.59 K (65.44°C)99.1%

Thermodynamic parameters of materials_

MaterialsDensity (kg/m3)Specific Heat (J/[kg·K])Thermal Conductivity (W/[m·K])
Silicate blocks19008800.800
Polyurethane – insulation301330.0207
Fibre cement boards18009200.400
Język:
Angielski
Częstotliwość wydawania:
4 razy w roku
Dziedziny czasopisma:
Nauki o Ziemi, Nauki o Ziemi, inne, Nauka o materiałach, Kompozyty, Materiały porowate, Fizyka, Mechanika i dynamika płynów
Kanał RSS czasopisma