<abstract xmlns="http://www.w3.org/1999/xhtml"><p> The paper presents results of laboratory investigation and analysis of crack initiation threshold identification of dolomite samples. First, selected methods for determining crack initiation thresholds are briefly described with special attention paid to four methods: crack volume strain method [14], change in Poisson’s ratio [8], lateral strain response method [16], and dilatancy method [4]. The investigation performed on dolomite samples shows that for the uniaxial and conventional triaxial compression tests, the above mentioned methods give quite similar values, except for the crack volume strain method. Crack initiation threshold determined by this method has a distinctively lower value than that obtained by the other methods. The aim of the present paper was to review and assess these methods for identifying crack initiation threshold based on laboratory tests of dolomite samples.</p></abstract>

The paper presents results of laboratory investigation and analysis of crack initiation threshold identification of dolomite samples. First, selected methods for determining crack initiation thresholds are briefly described with special attention paid to four methods: crack volume strain method [14], change in Poisson’s ratio [8], lateral strain response method [16], and dilatancy method [4]. The investigation performed on dolomite samples shows that for the uniaxial and conventional triaxial compression tests, the above mentioned methods give quite similar values, except for the crack volume strain method. Crack initiation threshold determined by this method has a distinctively lower value than that obtained by the other methods. The aim of the present paper was to review and assess these methods for identifying crack initiation threshold based on laboratory tests of dolomite samples.

Onset of Crack Initiation in Uniaxial and Triaxial Compression Tests of Dolomite Samples

AGH University of Science and Technology, Department of Geomechanics, Civil Engineering and Geotechnics, Kraków, Poland

Studia Geotechnica et Mechanica

This article is distributed under the terms of the Creative Commons Attribution Non-Commercial License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

The paper presents results of laboratory investigation and analysis of crack initiation threshold identification of dolomite samples. First, selected methods...

Onset of Crack Initiation in Uniaxial and Triaxial Compression Tests of Dolomite Samples

Data publikacji: 13 cze 2014

Zakres stron: 23 - 27

DOI: https://doi.org/10.2478/sgem-2014-0003

Słowa kluczowe
onset of crack initiation, laboratory investigations, uniaxial and triaxial compression

© by Jerzy Cieślik

This article is distributed under the terms of the Creative Commons Attribution Non-Commercial License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Onset of Crack Initiation in Uniaxial and Triaxial Compression Tests of Dolomite Samples

Data publikacji: 13 cze 2014

Zakres stron: 23 - 27

DOI: https://doi.org/10.2478/sgem-2014-0003

Słowa kluczoweonset of crack initiation, laboratory investigations, uniaxial and triaxial compression

© by Jerzy Cieślik

This article is distributed under the terms of the Creative Commons Attribution Non-Commercial License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Słowa kluczowe
onset of crack initiation, laboratory investigations, uniaxial and triaxial compression