<abstract xmlns="http://www.w3.org/1999/xhtml">

In this work, aluminum (Al)-based nanocomposites reinforced with graphite nanoplatelets (GnPs) have been fabricated by conventional sintering as well as spark plasma sintering (SPS) techniques, and their microstructure and mechanical properties have been studied. The powder metallurgy (PM) route has been adopted to fabricate the various Al–GnP nanocomposites. Characterization of the powder mixtures and the nanocomposites has been carried out through different characterization techniques, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and Raman spectroscopy. Compressive strength, Young's modulus, density, and Vickers microhardness of the various nanocomposites have also been determined. The HRTEM results show the formation of nonstoichiometric Al4C3 nanoparticles – during both conventional sintering and SPS – at the interface of the Al grains and GnP, which worsen the mechanical properties of the nanocomposites. SPSed nanocomposites show superior mechanical properties due to higher densification, finer grain size, and homogeneous nanofiller dispersion in the Al matrix, compared to the conventionally sintered Al–GnP nanocomposites.
</abstract>

In this work, aluminum (Al)-based nanocomposites reinforced with graphite nanoplatelets (GnPs) have been fabricated by conventional sintering as well as spark plasma sintering (SPS) techniques, and their microstructure and mechanical properties have been studied. The powder metallurgy (PM) route has been adopted to fabricate the various Al–GnP nanocomposites. Characterization of the powder mixtures and the nanocomposites has been carried out through different characterization techniques, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and Raman spectroscopy. Compressive strength, Young's modulus, density, and Vickers microhardness of the various nanocomposites have also been determined. The HRTEM results show the formation of nonstoichiometric Al4C3 nanoparticles – during both conventional sintering and SPS – at the interface of the Al grains and GnP, which worsen the mechanical properties of the nanocomposites. SPSed nanocomposites show superior mechanical properties due to higher densification, finer grain size, and homogeneous nanofiller dispersion in the Al matrix, compared to the conventionally sintered Al–GnP nanocomposites.

Effect of graphite nanoplatelets on spark plasma sintered and conventionally sintered aluminum-based nanocomposites developed by powder metallurgy

Department of Metallurgical and Materials Engineering

Department of Material Science and Engineering

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

In this work, aluminum (Al)-based nanocomposites reinforced with graphite nanoplatelets (GnPs) have been fabricated by conventional sintering as well as spark...

Effect of graphite nanoplatelets on spark plasma sintered and conventionally sintered aluminum-based nanocomposites developed by powder metallurgy

Data publikacji: 18 gru 2021

Zakres stron: 346 - 370

Otrzymano: 03 lip 2021

Przyjęty: 17 paź 2021

DOI: https://doi.org/10.2478/msp-2021-0029

Słowa kluczowe
Al-matrix nanocomposites, graphite nanoplatelets, wear, HRTEM, spark plasma sintering

© 2021 Pankaj Shrivastava et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Effect of graphite nanoplatelets on spark plasma sintered and conventionally sintered aluminum-based nanocomposites developed by powder metallurgy

Data publikacji: 18 gru 2021

Zakres stron: 346 - 370

Otrzymano: 03 lip 2021

Przyjęty: 17 paź 2021

DOI: https://doi.org/10.2478/msp-2021-0029

Słowa kluczoweAl-matrix nanocomposites, graphite nanoplatelets, wear, HRTEM, spark plasma sintering

© 2021 Pankaj Shrivastava et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Słowa kluczowe
Al-matrix nanocomposites, graphite nanoplatelets, wear, HRTEM, spark plasma sintering