Acceso abierto

Automatic Device with Self-Braking for Fixation Objects in Executive Links of Technological Equipment

Borys Prydalnyi

Borys Prydalnyi

Faculty of Transport and Mechanical Engineering, Department of Applied Mechanics and Mechatronics, Lutsk National Technical UniversityLutsk, Ukraine
Perfil de Orcid
Buscar este autor en
Sciendo|Google Scholar
Prydalnyi, Borys
  
31 mar 2025
Automatic Device with Self-Braking for Fixation Objects in Executive Links of Technological Equipment's Cover Image
Acerca de este artículo
Artículo anterior
Artículo siguiente
Cite
Descargar portada
Publicado en línea: 31 mar 2025
Páginas: 7 - 14
Recibido: 23 ene 2024
Aceptado: 21 may 2024
DOI: https://doi.org/10.2478/ama-2025-0002
Palabras clave
© 2025 Borys Prydalnyi, published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Fig. 1.

Mechanical CM’s actuator with geometric locking: a) functioning scheme in combination with a lever chuck (in the “clamped” state); b) general view of the mechanism (in the “unlocked” state)
Mechanical CM’s actuator with geometric locking: a) functioning scheme in combination with a lever chuck (in the “clamped” state); b) general view of the mechanism (in the “unlocked” state)

Fig. 2.

Design of the new electromechanical CM actuator
Design of the new electromechanical CM actuator

Fig. 3.

The scheme for calculating CM parameters
The scheme for calculating CM parameters

Fig. 4.

Dependence of clamping force TΣ in proposed CM from: a) frequency of rotation of the spindle n when the torque of the rotor of Тр = 66 Nm; b) torque Тр, which appears on the rotor at frequency of the spindle rotation n = 5000 rpm
Dependence of clamping force TΣ in proposed CM from: a) frequency of rotation of the spindle n when the torque of the rotor of Тр = 66 Nm; b) torque Тр, which appears on the rotor at frequency of the spindle rotation n = 5000 rpm

Fig. 5.

Design of the proposed clamping mechanism as part of the spindle assembly
Design of the proposed clamping mechanism as part of the spindle assembly

Fig. 6.

Scheme of the proposed clamping mechanism with electromechanical drive and hydraulic amplification system
Scheme of the proposed clamping mechanism with electromechanical drive and hydraulic amplification system
Idioma:
Inglés
Calendario de la edición:
4 veces al año
Temas de la revista:
Ingeniería, Ingeniería eléctrica, Electrónica, Ingeniería mecánica, Mecánica, Bioingeniería e ingeniería biomédica, Biomecánica, Ingeniería civil, Ingeniería ambiental
RSS Feed de revista