Uneingeschränkter Zugang

Automatic Device with Self-Braking for Fixation Objects in Executive Links of Technological Equipment

Borys Prydalnyi

Borys Prydalnyi

Faculty of Transport and Mechanical Engineering, Department of Applied Mechanics and Mechatronics, Lutsk National Technical UniversityLutsk, Ukraine
Orcid-Profil
Suche nach diesem Autor auf
Sciendo|Google Scholar
Prydalnyi, Borys
  
31. März 2025
Automatic Device with Self-Braking for Fixation Objects in Executive Links of Technological Equipment's Cover Image
Über diesen Artikel
Vorheriger Artikel
Nächster Artikel
Zitieren
COVER HERUNTERLADEN
Online veröffentlicht: 31. März 2025
Seitenbereich: 7 - 14
Eingereicht: 23. Jan. 2024
Akzeptiert: 21. Mai 2024
DOI: https://doi.org/10.2478/ama-2025-0002
Schlüsselwörter
© 2025 Borys Prydalnyi, published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Fig. 1.

Mechanical CM’s actuator with geometric locking: a) functioning scheme in combination with a lever chuck (in the “clamped” state); b) general view of the mechanism (in the “unlocked” state)
Mechanical CM’s actuator with geometric locking: a) functioning scheme in combination with a lever chuck (in the “clamped” state); b) general view of the mechanism (in the “unlocked” state)

Fig. 2.

Design of the new electromechanical CM actuator
Design of the new electromechanical CM actuator

Fig. 3.

The scheme for calculating CM parameters
The scheme for calculating CM parameters

Fig. 4.

Dependence of clamping force TΣ in proposed CM from: a) frequency of rotation of the spindle n when the torque of the rotor of Тр = 66 Nm; b) torque Тр, which appears on the rotor at frequency of the spindle rotation n = 5000 rpm
Dependence of clamping force TΣ in proposed CM from: a) frequency of rotation of the spindle n when the torque of the rotor of Тр = 66 Nm; b) torque Тр, which appears on the rotor at frequency of the spindle rotation n = 5000 rpm

Fig. 5.

Design of the proposed clamping mechanism as part of the spindle assembly
Design of the proposed clamping mechanism as part of the spindle assembly

Fig. 6.

Scheme of the proposed clamping mechanism with electromechanical drive and hydraulic amplification system
Scheme of the proposed clamping mechanism with electromechanical drive and hydraulic amplification system
Sprache:
Englisch
Zeitrahmen der Veröffentlichung:
4 Hefte pro Jahr
Fachgebiete der Zeitschrift:
Technik, Elektrotechnik, Elektronik, Maschinenbau, Mechanik, Bioingenieurwesen, Biomechanik, Bauingenieurwesen, Umwelttechnik
Zeitschrift RSS Feed