1. bookVolume 12 (2021): Issue 1 (May 2021)
Journal Details
License
Format
Journal
eISSN
2336-3037
First Published
16 Apr 2017
Publication timeframe
1 time per year
Languages
English
access type Open Access

Use of Technological Diagnosis in Rail Vehicle Engines Maintenance

Published Online: 04 Dec 2021
Page range: 249 - 260
Received: 10 Jun 2021
Accepted: 18 Nov 2021
Journal Details
License
Format
Journal
eISSN
2336-3037
First Published
16 Apr 2017
Publication timeframe
1 time per year
Languages
English
Abstract

The paper aims to classify the maintenance of internal combustion engines in 812 series diesel multiple units, to analyse operating failures, and to identify methods and procedures for determining their current mechanical condition. The paper specifies the required procedures and methods for maintenance starting from the development of the DMU (diesel multiple units) 812 series to the present. It also focuses on understanding how diagnosis and control sensors are attached in individual cable harnesses. A protocol for diagnosing combustion engine defects is proposed in the final part of the paper. A part of the paper is a proposed list of codes for individual faults to facilitate the work. Another method proposed within this paper is the definition and attachment of individual sensor connections on the engine in the EDC (Electronic Diesel Control) M(S) 5 cable harness. Faults leading to engine stop are identified.

Keywords

[1] Weis, P., Kucera, L., Pechac, P. & Mocilan, M. (2017). Modal Analysis of Gearbox Housing with Applied Load. In: 12th International Scientific Conference of Young Scientists on Sustainable, Modern and Safe Transport, 31-Jun 02 May 2017, High Tatras, Slovakia. Book Series: Procedia Engineering, 192, 953-958. DOI: 10.1016/j.proeng.2017.06.164.10.1016/j.proeng.2017.06.164 Search in Google Scholar

[2] Gramblicka, S., Kohar, R. & Madaj, R. (2017). Construction Design Automatically Adjustable Mechanism for Crane Forks. In: 58th International Conference of Machine Design Departments (ICMD 2017), 06-08 September 2017, (pp. 100-103). Prague, Czech Republic: Czech University Life Sciences, Faculty of Engineering. ISBN 978-80-213-2769-6. Search in Google Scholar

[3] Kohar, R., Stopka, M., Weis, P., Spisak, P. & Steininger, J. (2020). Modular 3D Printer Concept. In: 59th International Conference of Machine Design Departments (ICMD 2018), 11-14 September 2018 (pp. 483-488). Demanovska Dolina, Slovakia. Book Series: Lecture Notes in Mechanical Engineering. ISBN 97830303314503. Search in Google Scholar

[4] Jankejech, P., Fabian, P., Broncek, J. & Shalapko, Y. (2016). Influence of Tempering on Mechanical Properties of Induction Bents Below 540 Degrees C. Book Series: Acta Mechanica et Automatica 10(2), 81-86. DOI: 10.1515/ama-2016-0013.10.1515/ama-2016-0013 Search in Google Scholar

[5] Jambor, M., Kajanek, D., Fintova, S., Broncek, J., Hadzima, B., Guagliano, M. & Bagherifard, S. (2021). Directing Surface Functions by Inducing Ordered and Irregular Morphologies at Single and Two-Tiered Length Scales. Book Series: Advanced Engineering Materials, 23(2). Article Number: 2001057. DOI: 10.1002/adem.202001057.10.1002/adem.202001057 Search in Google Scholar

[6] Orman, L.J., Radek, N. & Broncek, J. (2018). Sintered Mesh Layers for the Production of Efficient Phase - Change Heat Exchangers. Book Series: Terotechnology, 5, 189-193. DOI: 10.21741/9781945291814-33.10.21741/9781945291814-33 Search in Google Scholar

[7] Kucera, L., Gajdac, I. & Kamas, P. (2014). Computing and Design of Electric Vehicles. In: 54th International Conference of Machine-Design-Departments, 10-12 September 2013 (pp. 105-111). Hejnice, Czech Republic. Book Series: Modern methods of construction design. DOI: 10.1007/978-3-319-05203-8_15.10.1007/978-3-319-05203-8_15 Search in Google Scholar

[8] Kucera, L., Patin, B., Gajdosik, T., Palencar, R., Palencar, J. & Ujlaky, M. (2020). Application of Metrological Approaches in the Design of Calibration Equipment for Verification of Float Level Gauges. Book Series: Measurement Science Review, 20(5), 230-235. DOI: 10.2478/msr-2020-0028.10.2478/msr-2020-0028 Search in Google Scholar

[9] Galbavy, M., Pitonak, J. & Kucera, L. (2014). Powershift Differential Transmission with Three Flows of Power for Hybrid Vehicles. In: 54th International Conference of Machine-Design-Departments, 10-12 September 2013 (pp. 27-33). Hejnice, Czech Republic. Book Series: Modern methods of construction design. DOI: 10.1007/978-3-319-05203-8_4.10.1007/978-3-319-05203-8_4 Search in Google Scholar

[10] Broncek, J., Drbul, M., Stupavsky, M. & Radek, N. (2017). The Application of New Rules of GPS in Structural Product Requirement. In: 58th International Conference of Machine Design Departments (ICMD), 06-08 September 2017 (pp. 50-55). Prague, Czech Republic: Czech University Life Sciences, Faculty of Engineering. ISBN 978-80-213-2769-6. Search in Google Scholar

[11] Caco, M., Tribula, R., Scerba, P. & Kohar, R. (2017). Application of Simulation Software to Optimize Construction Nodes of Ultrasonic Welding Machines. In 58th International Conference of Machine Design Departments (ICMD 2017), 06-08 September 2017 (pp. 56-59). Prague, Czech Republic: Czech University Life Sciences, Faculty of Engineering. ISBN 978-80-213-2769-6. Search in Google Scholar

[12] Sarkan, B., Kuranc, A. & Kucera, L. (2019). Calculations of Exhaust Emissions Produced by Vehicle with Petrol Engine in Urban Area. In: 4th International Conference of Computational Methods in Engineering Science (CMES’19), 21-23 November 2019, Kazimierz Dolny, Poland. Book Series: IOP Conference Series-Materials Science and Engineering, 710. Article Number: 012023. ISBN 9781713810391. Search in Google Scholar

[13] Liptakova, T., Broncek, J., Lovisek, M. & Lago, J. (2017). Tribological and Corrosion Properties of Al-brass. In: 33rd Danubia Adria Symposium on Advances in Experimental Mechanics (DAS), 20-23 September 2016 (pp. 5867-5871). Portoroz, Slovenia. Book Series: Materials today-proceedings, 4(5). ISBN 9781713810391. Search in Google Scholar

[14] Drbul, M., Martikan, P., Broncek, J., Litvaj, I. & Svobodova, J. (2018). Analysis of Roughness Profile on Curved Surfaces. Book Series: Innovative Technologies in Engineering Production (ITEP’18), 244. Article Number: 01024. DOI: 10.1051/matecconf/201824401024.10.1051/matecconf/201824401024 Search in Google Scholar

[15] Majchrak, M., Kohar, R., Kajan, J. & Skyba, R. (2019). 3D Meshing Methods of Ball-Rolling Bearings. In: 13th International Scientific Conference of Young Scientists on Sustainable, Modern and Safe Transport, 29-31 May 2019, Novy Smokovec, Slovakia. Book Series: Transportation Research Procedia, 40, 784-791. DOI: 10.1016/j.trpro.2019.07.111.10.1016/j.trpro.2019.07.111 Search in Google Scholar

[16] Gramblicka, S., Kohar, R., Majchrak, M. & Vrabec, M. (2020). Contact Analysis of Selected Toothed Contact of the Two-Stage Front Gearbox. In: 59th International Conference of Machine Design Departments (ICMD 2018), 11-14 September 2018 (pp. 263-269). Demanovska Dolina, Slovakia. Book Series: Lecture Notes in Mechanical Engineering. ISBN 9783030331450. Search in Google Scholar

[17] Rybicka, I., Droździel, P., Stopka, O. & Ľupták, V. 2018, “Methodology to propose a regional transport organization within specific integrated transport system: A case study”, Transport Problems 13(4), 115-125. DOI: 10.20858/tp.2018.13.4.11.10.20858/tp.2018.13.4.11 Search in Google Scholar

[18] Chaba, R. (2021). Influence of telematics of ubi insurance on the management of the fleet of company vehicles. The Archives of Automotive Engineering – Archiwum Motoryzacji 92(2), 69-82. DOI: 10.14669/AM.VOL92.ART5. Search in Google Scholar

[19] Iwnicki, S., Spiryagin, M., Cole, C. & McSweeney, T (2020). Handbook of Railway Vehicle Dynamics. Second Edition. Boca Raton: CRC Press/Taylor & Francis Group. ISBN 978-1-1386-0285-4. Search in Google Scholar

[20] Lupták, V., Stopka, O. & Jeřábek, K. (2017). “Draft deployment of traction units with active tilting system for regional and long-distance transport on non-modernized railway tracks”, MATEC Web of Conferences. DOI:10.1051/matecconf/201713400034.10.1051/matecconf/201713400034 Search in Google Scholar

[21] Kucera, L. & Gajdosik, T. (2014). The Vibrodiagnosis of Gears. In: 54th International Conference of Machine-Design-Departments, 10-12 September 2013 (pp. 113-118). Hejnice, Czech Republic. Book Series: Modern methods of construction design. DOI: 10.1007/978-3-319-05203-8_16.10.1007/978-3-319-05203-8_16 Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo