1. bookVolume 12 (2021): Issue 1 (May 2021)
Journal Details
License
Format
Journal
eISSN
2336-3037
First Published
16 Apr 2017
Publication timeframe
1 time per year
Languages
English
access type Open Access

Design of Vehicle Lifting Equipment Using Progressive Methods

Published Online: 04 Dec 2021
Page range: 238 - 248
Received: 10 Jun 2021
Accepted: 03 Nov 2021
Journal Details
License
Format
Journal
eISSN
2336-3037
First Published
16 Apr 2017
Publication timeframe
1 time per year
Languages
English
Abstract

The main objective of this article is to analyse the structural design of tire lifting equipment for tire services. To gain a better insight into the problem, several steps must be taken. The first step is to conduct a market analysis, which involves identifying all available equipment. Several types of lifting devices were distinguished within the development process, which differ from each other in terms of design and power supply. The type of structure and power unit represent the second steps in the design process. This is a critical aspect of the design since the forces necessary to move the system change as a result of these attributes. The design itself is the last step in the device’s design. Passenger cars differ from each other by their weight, which is limited to 3.5 tons. Based on the weight, basic strength calculation and dimensioning of the lifting device are carried out. Based on the calculations, the scissor lift device is selected. The lower frame, scissor legs, ramp, mechanical lock, and scissors drive mechanism are five main components of the device. This type of structure is best used with a hydraulic drive unit, which is calculated in the article.

Keywords

[1] Buczaj, A., Krzysiak, Z., Pecyna, A., Caban, J. & Brumercik, F. (2019). Safety during chemical transport of dangerous goods. Przemysl chemiczny 98(8), 1276-1280. DOI: 10.15199/62.2019.8.13.10.15199/62.2019.8.13 Search in Google Scholar

[2] Tomasikova, M., Tropp, M., Gajdosik, T., Krzywonos, L. & Brumercik, F. (2017). Analysis of transport mechatronic system properties. In: 12th International Scientific Conference of Young Scientists on Sustainable, Modern and Safe Transport, 31 May-02 Jun 02 2017 (pp. 881-886). Amsterdam, Nederland: Elsevier. Search in Google Scholar

[3] Tropp, M., Tomasikova, M., Bastovansky, R., Krzywonos, L. & Brumercik, F. (2017). Concept of deep drawing mechatronic system working in extreme conditions. In: 12th International Scientific Conference of Young Scientists on Sustainable, Modern and Safe Transport, 31 May-02 Jun 02 2017 (pp. 893-898), Amsterdam, Nederland: Elsevier. Search in Google Scholar

[4] Tropp, M., Tomasikova, M., Bastovansky, R., Krzywonos, L., Brumercik, F. & Krzysiak, Z. (2017). Transient thermal simulation of working components of mechatronic system for deep drawing of molybdenum sheets. In: 58th International Conference of Machine Design Departments, 06-08 Sep 2017 (pp. 408-413) Czech Unity Life Sci, Fac Engn, Prague, Czech republic. Search in Google Scholar

[5] Mitka, M., Bastovansky, R., Brumercik, F. & Ignaciuk, P. (2017). Local resistance of heating molybdenum sheet in a test device. Advances in Science and Technology-Research Journal 11(3), 87-93. DOI: 10.12913/22998624/74182.10.12913/22998624/74182 Search in Google Scholar

[6] Caco, M., Kohar, R., Hrcek, S., Tribula, R. & Scerba, P. (2017). Use the method of TRIZ in optimizing automated machine for ultrasonic welding. In: 12th International Scientific Conference of Young Scientists on Sustainable, 31 May-02 Jun 02 2017 (pp. 80-85), Amsterdam, Nederland: Elsevier. Search in Google Scholar

[7] Gramblicka, S., Kohar, R. & Madaj, R. (2017). Construction design automatically adjustable mechanism for crane forks. In: 58th International Conference of Machine Design Departments (ICMD 2017), 06-08 September 2017 (pp. 100-103). Prague, Czech Republic: Czech University of Life Sciences. Search in Google Scholar

[8] Medvecky, S., Kohar, R. & Hrcek, S. (2012). Dynamic analysis of cage behavior in a tapered roller bearing. In: 7th International Symposium on Machine and Industrial Design in Mechanical Engineering. 24-26 May 2012 (pp. 45-50). Balatonfured, Hungary. Search in Google Scholar

[9] Majchrak, M., Kohar, R., Kajan, J. & Skyba, R. (2019). 3D Meshing Methods of Ball-Rolling Bearings. Transportation Research Procedia 40, 784-791. DOI: 10.1016/j.trpro.2019.07.111.10.1016/j.trpro.2019.07.111 Search in Google Scholar

[11] Caco, M., Tribula, R., Scerba, P. & Kohar, R. (2017). Application of simulation software to optimize construction nodes of ultrasonic welding machines. In: 58th International Conference of Machine Design Departments (ICMD 2017), 06-08 September 2017 (pp. 56-59). Prague, Czech Republic: Czech University of Life Sciences. Search in Google Scholar

[12] Gramblicka, S., Kohar, R., Majchrak, M. & Vrabec, M. (2020). Contact Analysis of Selected Toothed Contact of the Two-Stage Front Gearbox. In: 59th International Conference of Machine-Design-Departments (ICMD 2018), 11-14 September 2018 (pp. 263-269). Cham, Switzerland: Springer. Search in Google Scholar

[13] Kohar, R., Stopka, M., Weis, P., Spisak, P. & Steininger, J. (2020). Modular 3D Printer Concept. In: 59th International Conference of Machine Design Departments (ICMD 2018), 11-14 September 2018 (pp. 483-488). Cham, Switzerland: Springer. Search in Google Scholar

[14] Steininger, J., Hrcek, S., Gajdosik, T. & Stopka, M. (2017). The optimization procedure of the inner geometry in the spherical roller bearings with regard to their durability. In: 58th International Conference of Machine Design Departments, 06-08 September 2017, (pp. 352-355). Czech Univ Life Sci, Fac Engn, Prague, Czech Republic. Search in Google Scholar

[15] Belorit, M., Hrcek, S., Gajdosik, T. & Steininger, J. (2017). Description of the bearing check program for countershaft gearboxes. In: 58th International Conference of Machine Design Departments (ICMD 2017), 06-08 Sep 2017 (pp. 32-35). Czech Univ Life Sci, Fac Engn, Prague, Czech Republic. Search in Google Scholar

[16] Bistak, M., Medvecky, S. & Hrcek, S. (2017). The above-ground weighbridge. In: 12th International Scientific Conference of Young Scientists on Sustainable, Modern and Safe Transport, 31 May-02 Jun 2017 (pp. 52-57). Amsterdam, Nederland: Elsevier. Search in Google Scholar

[17] Steininger, J., Hrcek, S. & Krchnavy, B. (2017). The design of universal loading device for a grinding machines. In: 12th International Scientific Conference of Young Scientists on Sustainable, Modern and Safe Transport, 31 May-02 Jun 2017 (pp. 869-874). Amsterdam, Nederland: Elsevier. Search in Google Scholar

[18] Steininger, J., Hrcek, S., Smetanka, L. & Skyba, R. (2020). Optimisation procedure of inner geometry in spherical roller bearings with regard to their durability. Scientific Journal of Silesian University of Technology-Series Transport, 173-181. DOI: 10.20858/sjsutst.2020.106.15.10.20858/sjsutst.2020.106.15 Search in Google Scholar

[19] Skyba, R., Hrcek, S., Smetanka, L. & Majchrak, M. (2019). Strength analysis of slewing bearings. In: 13th International Scientific Conference of Young Scientists on Sustainable, Modern and Safe Transport, 29-31 May 2019 (pp. 891-897). Amsterdam, Nederland: Elsevier. Search in Google Scholar

[20] Belorit, M., Hrcek, S. & Bistak, M. (2020). Description of the Methodology of the Automated Optimization Process. In: 59th International Conference of Machine Design Departments, 11-14 Sep 2018 (pp. 391-398). Cham, Switzerland: Springer. Search in Google Scholar

[21] Skyba, R., Hrcek, S., Smetanka, L. & Majchrak, M. (2020). Creation of Calculation 3D Model of Slewing Bearing. In: 59th International Conference of Machine Design Departments, 11-14 Sep 2018 (pp. 149-157). Cham, Switzerland: Springer. Search in Google Scholar

[22] Steininger, J., Dungel, J., Hrcek, S. & Gajdac, I. (2020). The Procedure for Reduction of the Acoustic Performance Level of the Spinning Cycle in the Washing Machine. In: 59th International Conference of Machine Design Departments, 11-14 Sep 2018 (pp. 391-398). Cham, Switzerland: Springer. Search in Google Scholar

[23] Jankejech, P., Fabian, P., Broncek, J. & Shalapko, Y. (2016). Influence of tempering on mechanical properties of induction bents below 540 degrees C. Acta mechanica et automatica 10(2), 81-86. DOI: 10.1515/ama-2016-0013.10.1515/ama-2016-0013 Search in Google Scholar

[24] Orman, L.J., Radek, N. & Broncek, J. (2018). Sintered Mesh Layers for the Production of Efficient Phase - Change Heat Exchangers. Materials Research Proceedings 5, 189-193. DOI: 10.21741/9781945291814-33.10.21741/9781945291814-33 Search in Google Scholar

[25] Drbul, M., Martikan, P., Broncek, J., Litvaj, I. & Svobodova, J. (2018). Analysis of roughness profile on curved surfaces. MATEC Web of Conferences 244, 01024. DOI: 10.1051/matecconf/201824401024.10.1051/matecconf/201824401024 Search in Google Scholar

[26] Liptakova, T., Broncek, J., Lovisek, M. & Lago, J. (2017). Tribological and corrosion properties of Al-brass. Materials Today: Proceedings 4(5), 5867-5871. DOI: 10.1016/j.matpr.2017.06.060.10.1016/j.matpr.2017.06.060 Search in Google Scholar

[27] Jambor, M., Kajanek, D., Fintova, S., Broncek, J., Hadzima, B., Guagliano, M. & Bagherifard, S. (2021). Directing Surface Functions by Inducing Ordered and Irregular Morphologies at Single and Two-Tiered Length Scales. Advanced Engineering Materials 23(2), 2001057. DOI: 10.1002/adem.202001057.10.1002/adem.202001057 Search in Google Scholar

[28] Broncek, J., Drbul, M., Stupavsky, M. & Radek, N. (2017). The application of new rules of GPS in structural product requirement. In: 58th International Conference of Machine Design Departments (ICMD 2017), 06-08 September 2017 (pp. 50-55). Prague, Czech Republic: Czech University of Life Sciences. Search in Google Scholar

[29] Jambor, M., Kajanek, D., Fintova, S., Broncek, J., Hadzima, B., Guagliano, M. & Bagherifard, S. (2021). Directing Surface Functions by Inducing Ordered and Irregular Morphologies at Single and Two-Tiered Length Scales. Advanced Engineering Materials 23(2), 2001057. DOI: 10.1002/adem.202001057.10.1002/adem.202001057 Search in Google Scholar

Recommended articles from Trend MD

Plan your remote conference with Sciendo