1. bookTom 29 (2023): Zeszyt 2 (June 2023)
Informacje o czasopiśmie
Pierwsze wydanie
30 Mar 2018
Częstotliwość wydawania
4 razy w roku
Otwarty dostęp

Design and optimization of the construction of a mobile disinfection chamber for small communication devices and small objects

Data publikacji: 26 Apr 2023
Tom & Zeszyt: Tom 29 (2023) - Zeszyt 2 (June 2023)
Zakres stron: 201 - 215
Otrzymano: 25 Aug 2022
Przyjęty: 28 Nov 2022
Informacje o czasopiśmie
Pierwsze wydanie
30 Mar 2018
Częstotliwość wydawania
4 razy w roku

ALICONA, 2022. Dimensional accuracy & surface finish measurement. available at: https://www.alicona.com/products/infinitefocus/ (Accessed 10 April 2022). Search in Google Scholar

Baloch, S., Baloch, M. A., Zheng, T., and Pei, X., 2020. The Coronavirus Disease 2019 (COVID-19) Pandemic. The Tohoku Journal of Experimental Medicine, 250 (4), 271–278, DOI: 10.1620/tjem.250.271 Otwórz DOISearch in Google Scholar

Bergman, R.S. 2021. Germicidal UV Sources and Systems. Photochemistry and Photobiology, 97(3), 466-470, DOI: 10.1111/php.13387 Otwórz DOISearch in Google Scholar

Brzęk, A., Dworrak, T., Strauss, M., Sanchis-Gomar, F., Sabbah, I., Dworrak, B. and Leischik, R., 2017. The weight of pupils’ schoolbags in early school age and its influence on body posture. BMC Musculoskelet Disord, 18 (1), 117, DOI: 10.1186/s12891-017-1462-z Otwórz DOISearch in Google Scholar

Bukłaha, A., Wieczorek, A., Kruszewska, E., Majewski, P., Iwaniuk, D., Sacha, P., Tryniszewska, E. and Wieczorek, P., 2022. Air Disinfection—From Medical Areas to Vehicle. Front. Public Health, 10, 820816, DOI: 10.3389/fpubh.2022.820816 Otwórz DOISearch in Google Scholar

Caco, M., Tribula, R., Scerba, P.; Kohar, R., 2017. Application of simulation software to optimize construction nodes of ultrasonic welding machines. Proceedings of 58th international conference of machine design departments (ICMD 2017), Prague, Czech University of Life Sciences Prague, 56-59. Search in Google Scholar

CDC, 2015. Hierarchy of Controls. available at: https://www.cdc.gov/niosh/topics/hierarchy/default.html (accessed 15 April 2022) Search in Google Scholar

CDC, 2021. Cleaning and Disinfecting Your Facility. available at: https://www.cdc.gov/coronavirus/2019-ncov/community/disinfecting-building-facility.html (accessed 03 May 2022) Search in Google Scholar

Chen, X., Liao, B., Cheng, L., Peng, X., Xu, X., Li, Y., Hu, T., Li, J., Zhou, X., and Ren, B., 2020. The microbial coinfection in COVID-19. Applied Microbiology and Biotechnology, 104(18), 7777–7785, DOI: 10.1007/s00253-020-10814-6 Otwórz DOISearch in Google Scholar

Engineering product design, 2022. Rapid prototyping. available at: https://engineeringproductdesign.com/knowledge-base/rapid-prototyping-techniques/ (accessed 18 March 2022) Search in Google Scholar

EOS, 2007. Technical Description FORMIGA P 100. available at: https://webbuilder5.asiannet.com/ftp/2684/TD_P100_en.pdf (accessed 20 April 2022) Search in Google Scholar

EOS, 2022. Polyamide 12 for 3D Printing. available at: https://www.eos.info/en/additive-manufacturing/3d-printing-plastic/sls-polymer-materials/polyamide-pa-12-alumide (accessed 08 March 2022) Search in Google Scholar

ESA, 2013. 3D printing for space: the additive revolution. available at: https://www.esa.int/Science_Exploration/Human_and_Robotic_Exploration/Research/3D_printing_for_space_the_additive_revolution (accessed 15 April 2022) Search in Google Scholar

European Council, 2022. COVID-19: the EU's response in the field of public health. available at: https://www.consilium.europa.eu/en/policies/coronavirus/covid-19-public-health/ (accessed 05 April 2022) Search in Google Scholar

Faes, M., Wang, Y., Lava, P. and Moens, D., 2016. Variability, heterogeneity, and anisotropy in the quasi-static response of laser sintered PA12 components. Strain An International Journal for Experimental Mechanics, 53(2), DOI: 10.1111/str.12219. Otwórz DOISearch in Google Scholar

FAO, IFAD, UNICEF, WFP and WHO, 2020. The State of Food Security and Nutrition in the World 2020. Rome, Italy. Search in Google Scholar

Furka, S., Furka, D., Dadi, N. Ch. T. Ch. T., Palacka, P., Hromníková, D., Santana, J. D. S., Pineda, J. D., Casas, S. D., and Bujdák, J., 2021. Novel antimicrobial materials designed for the 3D printing of medical devices used during the COVID-19 crisis. Rapid Prototyping Journal, 27(5), 890-904, DOI: 10.1108/RPJ-09-2020-0219 Otwórz DOISearch in Google Scholar

Gan, X., Fei, G., Wang, J., Wang, Z., Lavorgna, M., Xia, H., 2020. Powder quality and electrical conductivity of selective laser sintered polymer composite components. Woodhead Publishing Series in Composites Science and Engineering Part 2, Elsevier, Woodhead Publishing, 149-185. Search in Google Scholar

Gibson, I., Rosen, D., Stucker, B., 2014. Additive Manufacturing Technologies. New York: Springer. Search in Google Scholar

Groth, L., 2020. 9 Vitamin D Benefits You Should Know—and How to Get More in Your Diet. Health, 25 June, available at: https://www.health.com/nutrition/vitamins-supplements/vitamin-d-benefits (accessed 10 May 2022) Search in Google Scholar

Hofland, E.C., Baran, I., Wismeijer, D.A., 2017. Correlation of Process Parameters with Mechanical Properties of Laser Sintered PA12 Parts. Advances in Materials Science and Engineering, 2017(4953173), 1-11, DOI: 10.1155/2017/4953173 Otwórz DOISearch in Google Scholar

HP, 2022. HP Jet Fusion 4200 Industrial 3D Printing Solution. available at: https://www.hp.com/us-en/printers/3d-printers/products/multi-jet-fusion-4200.html (accessed 20 may 2022) Search in Google Scholar

Hsu, T.C., Teng, Y.T., Yeh, Y.W., Fan, X., Chu, K.H., Lin, S.H., Yeh, K.K., Lee, P.T., Lin, Y., Chen, Z., Wu, T., Kuo, H.C., 2021. Perspectives on UVC LED: Its Progress and Application. Photonics, 8(6), 196, DOI: 10.3390/photonics8060196 Otwórz DOISearch in Google Scholar

JAG Jakob SA, 2020. Selective UV-C disinfection on autonomous mobile robot (AGV - AMR). available at: https://www.siams.ch/news-en/selective-uv-c-disinfection-on-autonomous-mobile-robot--agv---amr-/4023 (accessed 23 May 2022) Search in Google Scholar

Khorasani, M., Ghasemi, A., Rolfe, B. and Gibson, I., 2022. Additive manufacturing a powerful tool for the aerospace industry. Rapid Prototyping Journal, 28(1), 87-100, DOI: 10.1108/RPJ-01-2021-0009. Otwórz DOISearch in Google Scholar

Kitagawa, H., Nomura, T., Nazmul,T., Omori, K., Shigemoto, N., Sakaguchi, T. and Ohge, H., 2021. Effectiveness of 222-nm ultraviolet light on dis-infecting SARS-CoV-2 surface contamination, American Journal of Infection Control, 49(3), 299-301, DOI: 10.1016/j.ajic.2020.08.022 Otwórz DOISearch in Google Scholar

Kohár, R., Stopka, M., Weis, P., Spišák, P., Šteininger, J., 2020. Modular 3D Printer Concept, Current Methods of Construction Design. Lecture Notes in Mechanical Engineering, ICMD 2018, Cham, Springer, 483-488. Search in Google Scholar

Leong, A., 2021. School Bags Shouldn’t Weigh More Than 10% Of The Child’s Weight, Says Study. available at: https://www.therakyat-post.com/news/2021/12/01/school-bags-shouldnt-weigh-more-than-10-of-the-childs-weight-says-study/ (accessed 02 June 2022) Search in Google Scholar

Lewis, D., 2020. Is the coronavirus airborne? Experts can’t agree. Nature, 580, 175 Search in Google Scholar

Luyster, F.S., Strollo, P.J., Zee, P.C. and Walsh, J.K., 2012. Sleep: A Health Imperative. Sleep, 35(6), 727-734, DOI: 10.5665/sleep.1846 Otwórz DOISearch in Google Scholar

Ma, B., Gundy, P.M., Gerba, Ch.P., Sobsey, M.D. and Linden, K.G., 2021. UV Inactivation of SARS-CoV-2 across the UVC Spectrum: KrCl* Excimer. Mercury-Vapor, and Light-Emitting-Diode (LED) Sources, Applied and Environmetal Microbiology, 87(22), DOI: 10.1128/AEM.01532-21 Otwórz DOISearch in Google Scholar

Material datacenter, 2022. PA 2200 Balance 1.0. available at: https://www.materialdatacenter.com/mb/material/pdf/30962/30962/PA2200Balance1.0 (accessed 14 June 2022) Search in Google Scholar

Materialize, 2022. Powder based 3D printing, without the lasers. available at: https://www.materialise.com/en/manufacturing/3d-printing-technology/multi-jet-fusion (accessed 03 June 2022) Search in Google Scholar

Mehrpouya, M., Tuma, D., Vaneker, T., Afrasiabi, M., Bambach, M. Gibson I., 2022. Multimaterial powder bed fusion techniques. Rapid Prototyping Journal, 28(11), 1-19, DOI: 10.1108/RPJ-01-2022-0014 Otwórz DOISearch in Google Scholar

Mohol, S.S., Sharma, V., 2021. Functional applications of 4D printing: a review. Rapid Prototyping Journal, 27(8), 1501-1522, DOI: 10.1108/RPJ-10-2020-0240 Otwórz DOISearch in Google Scholar

Morawska, L., Cao, J., 2020. Airborne transmission of SARS-CoV-2: The world should face the reality. Environment International, 139, 105730, DOI: 10.1016/j.envint.2020.105730 Otwórz DOISearch in Google Scholar

National Environment Agency, 2021. Guidelines for In-House Cleaning and Disinfection of Areas Exposed to COVID-19 Cases in Non-Healthcare Premises. available at: https://www.nea.gov.sg/our-services/public-cleanliness/environmental-cleaning-guidelines/guidelines/guidelines-for-in-house-cleaning-and-disinfection-of-areas-exposed-to-covid-19-cases-in-non-healthcare-premises (accessed 03 April 2022) Search in Google Scholar

Nourazzaran, M., Yousefi, R., Moosavi-Movahedi, A., 2022. Effects of Vitamin D in Fighting COVID-19 Disease. Iranian J Nutr Sci Food Technol, 16 (4), 121-130, URL: https://nsft.sbmu.ac.ir/article-1-3294-en.html&sw=Effects+of+Vitamin+D+in+Fighting Search in Google Scholar

Obi, M.U., Pradel, P., Sinclair, M., Bibb, R., 2022. A bibliometric analysis of research in design for additive manufacturing. Rapid Prototyping Journal, 28(5), 967-987, DOI: 10.1108/RPJ-11-2020-0291 Otwórz DOISearch in Google Scholar

Oosterhoff, B. and Palmer, C.A., 2020. Psychological Correlates of News Monitoring, Social Distancing. Disinfecting, and Hoarding Behaviors among US Adolescents during the COVID-19 Pandemic, PsyArXiv Pre-prints, 174(12), 1184-1190, DOI: 10.31234/osf.io/rpcy4 Otwórz DOISearch in Google Scholar

Ouajjani, K., 2018. The History of 3D Printing. available at: https://www.engineeringclicks.com/history-of-3d-printing-2/ (accessed 10 April 2022) Search in Google Scholar

Philips Box, 2022. UV-C disinfection box 10L TG GM. available at: https://www.lighting.philips.com.sg/consumer/p/disinfection-disinfection-box/8719514302259 (accessed 15 April 2022) Search in Google Scholar

Philips Minibox, 2022. UV-C disinfection mini box G GM. available at: https://www.lighting.philips.com.ph/consumer/p/disinfection-disinfection-box/8719514344846 (accessed 15 April 2022) Search in Google Scholar

Philips UV-C, 2022. Protect your home against viruses and bacteria with UVC lighting. available at: https://www.lighting.philips.co.uk/consumer/uvc-lighting (accessed 16 April 2022) Search in Google Scholar

Ruschel, J., Glaab, J., Susilo, N., Hagedorn, S., Walde, S., Ziffer, E., Cho, H. K., Ploch, N. L., Wernicke, T., Weyers, M., Einfeldt, S. and Kneissl, M., 2020. Reliability of UVC LEDs fabricated on AIN/sapphire templates with different threading dislocation densities. Applied Physics Letters, 117(24), 241104, DOI: 10.1063/5.0027769 Otwórz DOISearch in Google Scholar

Sculpteo, 2021. 3D Printing with Multi Jet Fusion technology. available at: https://www.sculpteo.com/en/materials/jet-fusion-material/ (accessed 01 June 2022) Search in Google Scholar

Shapeyways, 2021. Access EOS Selective Laser Sintering with Shapeways. available at: https://www.shapeways.com/partnership/eos (accessed 08 June 2022) Search in Google Scholar

Sharma, P., Chen, P., Han, S., Chung, P., Chen, J., Tseng, J. and Han, Ch., 2021. Design Considerations for a Surface Disinfection Device Using Ultraviolet-C Light-Emitting Diodes. Journal of Research of the National Institute of Standards and Technology, 126, 126045, DOI: 10.6028/jres.126.045 Otwórz DOISearch in Google Scholar

SHINING 3, 2022. EinScan-SP SPECS Destkop 3D Scanner. available at: https://www.einscan.com/desktop-3d-scanners/einscan-sp/einscan-spspecs/ (accessed 16 May 2022) Search in Google Scholar

Sinterit, 2022. Sinterit Lisa SLS 3D printer - the most compact SLS 3D printer. available at: https://sinterit.com/3dprinters/lisa/ (accessed 20 May 2022) Search in Google Scholar

Stoia, D.I., Linul, E., Marsavina, L., 2019. Influence of Manufacturing Parameters on Mechanical Properties of Porous Materials by Selective Laser Sintering. Materials (Basel), 12(6), 871, DOI: 10.3390/ma12060871 Otwórz DOISearch in Google Scholar

Student Lesson, 2022. Understanding non-traditional machining process. available at: https://studentlesson.com/definition-application-diagram-types-methods-advantages-and-disadvantages-of-non-traditional-machining-processes/ (accessed 09 June 2022) Search in Google Scholar

Tropp, M., Tomasikova, M., Bastovansky, R., Krzywonos, L., Brumercik, F., 2017. Concept of deep drawing mechatronic system working in extreme conditions. 12th International Scientific Conference of Young Scientists on Sustainable, Modern and Safe Transport, High Tatras, Elsevier, 893-898. Search in Google Scholar

Wegner, A., Witt, G., 2012. Correlation of Process Parameters and Part Properties in Laser Sintering using Response Surface Modeling. in Schmidt, M., Vollertsen, F. and Geiger, M. (Ed.s), LANE 2012: Laser Assister Net shape Engineering 7, Furth, Germany, 480-490. Search in Google Scholar

Wiberg, A., Persson, J., Ölvander, J., 2021. An optimisation framework for designs for additive manufacturing combining design, manufacturing and post-processing. Rapid Prototyping Journal, 27(11), 90-105, DOI: 10.1108/RPJ-02-2021-0041 Otwórz DOISearch in Google Scholar

Wu, J., Song, S., Cao, H. C., Li, L. J., 2020. Liver diseases in COVID-19: Etiology. treatment and prognosis, World Journal of Gastroenterology, 26(19), 2286–2293, DOI: 10.3748/wjg.v26.i19.2286 Otwórz DOISearch in Google Scholar

Polecane artykuły z Trend MD