Formation of coatings with technologies using concentrated energy stream

Aghajani, H., Hadavand, E., Peighambardoust, N.S., Khameneh-asl, S., 2020. Electro spark deposition of WC–TiC–Co–Ni cermet coatings on St52 steel. Surfaces and Interfaces, 18.10.1016/j.surfin.2019.100392 Search in Google Scholar

Antoszewski, B., Radek, N., Tarelnik, W., Wajs, E., 2005. Electro discharge and laser texturing of sliding face of mechanical seals. IX International Conference HERVICON, Sumy, Ukraine, 15-123. Search in Google Scholar

Dudek, A., Kolan, C., 2010. Assessments of Shrinkage Degree in Bioceramic Sinters HA+ZrO(2). Mechatronic Systems and Materials: Materials Production Technologies, 165, 25-30.10.4028/www.scientific.net/SSP.165.25 Search in Google Scholar

Dudek, A., Wlodarczyk, R., 2010. Structure and Properties of Bioceramics Layers used for Implant Coatings. Solid State Phenomena, 165, 31-36.10.4028/www.scientific.net/SSP.165.31 Search in Google Scholar

Dwornicka, R., Radek, N., Krawczyk, M., Osocha, P., Pobedza, J., 2017. The Laser Textured Surfaces of the Silicon Carbide Analyzed with the Bootstrapped Tribology Model. METAL 2017, 26^th International Conference on Metallurgy and Materials, 1252-1257. Search in Google Scholar

Dziopa, Z., Koruba, Z., 2015. The impact of launcher turret vibrations control on the rocket launch. Bulletin of the Polish Academy of Sciences-Technical Sciences, 63(3), 717-728.10.1515/bpasts-2015-0083 Search in Google Scholar

Fabiś-Domagała, J., Domagała, M., Momeni, H., 2021. A matrix FMEA analysis of variable delivery vane pumps. Energies, 14(6), art. 1741.10.3390/en14061741 Search in Google Scholar

Filo, G., Lisowski, E., Domagala, M., Fabis-Domagala, J., Momeni, H., 2018. Modelling of Pressure Pulse Generator with the Use of a Flow Control Valve and a Fuzzy Logic Controller. AIP Conf. Proc., 2029, art. 020015.10.1063/1.5066477 Search in Google Scholar

Gadek-Moszczak, A., Radek, N., Wroński, S., Tarasiuk, J., 2014. Application the 3D Image Analysis Techniques for Assessment the Quality of Material Surface Layer before and after Laser Treatment. Advanced Materials Research., 874, 133-138.10.4028/www.scientific.net/AMR.874.133 Search in Google Scholar

Galin, R., Khina, B., Shaburova, N., Wassilkowska, A., 2021. The formation of zinc coatings in nanocrystallised zinc powders. Technical Transactions, 118, art. e2021009, DOI: 10.37705/TechTrans/e202100910.37705/TechTrans/e2021009 Search in Google Scholar

Guidoni, G., Dudek, A., Patsias, S., Anglada, M., 2005. Fracture behaviour of thermal barrier coatings after high temperature exposure in air. Materials Science and Engineering A, 397(1-2), 209-214.10.1016/j.msea.2005.02.022 Search in Google Scholar

Klimecka-Tatar, D., Pawlowska, G., Szymura, S., 2010. Encapsulation as an effective prevention method of powder oxidation in bonded magnet technology. Ochrona Przed Korozja, 53(11), 585-588. Search in Google Scholar

Krzysztofik, I., Takosoglu, J., Koruba, Z., 2017. Selected methods of control of the scanning and tracking gyroscope system mounted on a combat vehicle. Annual Reviews in Control, 44, 173-182.10.1016/j.arcontrol.2016.10.003 Search in Google Scholar

Kulis, C., Müller, J., 2020. Indoor air quality improvement in natural ventilation using a fuzzy logic controller. Technical Transactions, 117, art. e2020045, DOI: 10.37705/TechTrans/e202004510.37705/TechTrans/e2020045 Search in Google Scholar

Markovic, S., Arsic, D., Nikolic, R.R., Lazic, V., Hadzima, B., Milovanovic, V.P., Dwornicka, R., Ulewicz, R., 2021. Exploitation Characteristics of Teeth Flanks of Gears Regenerated by Three Hard-Facing Procedures. Materials, 14(15), art. 4203.10.3390/ma14154203834814534361396 Search in Google Scholar

Maruszczyk, A., Dudek, A., Szala, M., 2017. Research into Morphology and Properties of TiO₂ - NiAl Atmospheric Plasma Sprayed Coating. Advances in Science and Technology-Research Journal, 11(3), 204-210.10.12913/22998624/76450 Search in Google Scholar

Mysłek A., 2020. Crack propagation analysis in selected railway bogie components. Technical Transactions, 117, art. e2020017, DOI: 10.37705/TechTrans/e202001710.37705/TechTrans/e2020017 Search in Google Scholar

Orman, L. J., 2009. Possibilities of Heat Transfer Enhancement in Automotive Heat Exchangers, Transport Means 2009: 116-119. Search in Google Scholar

Ostasz, G., Czerwinska, K., Pacana, A., 2020. Quality Management of Aluminum Pistons with the Use of Quality Control Points, Management Systems in Production Engineering, 28(1), 29-33.10.2478/mspe-2020-0005 Search in Google Scholar

Pacana, A., Czerwinska, K., Dwornicka, R., 2019. Analysis of Non-Compliance for the Cast of the Industrial Robot Basis, 28^th International Conference on Metallurgy and Materials, 644-650.10.37904/metal.2019.869 Search in Google Scholar

Padgurskas, J., Kreivaitis, R., Rukuiža, R., Mihailov, V., Agafii, V., Kriūkienė, R., Baltušnikas, A., 2017. Tribological properties of coatings obtained by electro-spark alloying C45 steel surfaces, Surface and Coatings Technology, 311, 90-97.10.1016/j.surfcoat.2016.12.098 Search in Google Scholar

Przestacki, D., Kuklinski, M., Bartkowska, A., 2017. Influence of laser heat treatment on microstructure and properties of surface layer of Waspaloy aimed for laser-assisted machining. International Journal of Advanced Manufacturing Technology, 93(9-12), 3111-3123.10.1007/s00170-017-0775-2 Search in Google Scholar

Radek, N., 2010. Production of proper texture on the flat sliding pair surfaces by means of electro-erosion or laser treatment, Mechanik, 83(11), 822-825. Search in Google Scholar

Radek, N., Konstanty, J., Scendo, M., 2015. The electrospark deposited WCCu coatings modified by laser treatment. Archives of Metallurgy and Materials, 60, 2579-2584.10.1515/amm-2015-0417 Search in Google Scholar

Radek, N., Szczotok, A., Gądek-Moszczak, A., Dwornicka, R., Bronček, J., Pietraszek, J., 2018. The impact of laser processing parameters on the properties of electro-spark deposited coatings. Archives of Metallurgy and Materials, 63, 809-816. Search in Google Scholar

Rączka, M., Pysz, S., Piotrowski, K., 2020. Guidelines for the manufacture of heavy ductile iron castings. Technical Transactions, 117, art. e2020044. DOI: 10.37705/TechTrans/e202004410.37705/TechTrans/e2020044 Search in Google Scholar

Ryk, G., Etsion, I., 2006, Testing piston rings with partial laser surface texturing for friction reduction. Wear, 261, 792-796.10.1016/j.wear.2006.01.031 Search in Google Scholar

Salmaliyan, M., Malek Ghaeni, F., Ebrahimnia, M., 2017. Effect of electro spark deposition process parameters on WC-Co coating on H13 steel. Surface and Coatings Technology, 321, 81-89.10.1016/j.surfcoat.2017.04.040 Search in Google Scholar

Skrzypczak, L., Skrzypczak-Pietraszek, E., Lamerzarawska, E., Hojden, B., 1994. Micropropagation of Oenothera-Biennis L and an Assay of Fatty-Acids. Acta Societatis Botanicorum Poloniae, 63(2), 173-177.10.5586/asbp.1994.023 Search in Google Scholar

Skrzypczak-Pietraszek, E., Hensel, A., 2000. Polysaccharides from Melittis melissophyllum L. herb and callus. Pharmazie, 55(10), 768-771. Search in Google Scholar

Styrylska, T., Pietraszek, J., 1992. Numerical Modeling of Non Steady State Temperature Fields with Supplementary Data. Zeitschrift für Angewandte Mathematik und Mechanik, 72(6), T537-T539. Search in Google Scholar

Szczodrowska, B., Mazurczuk, R., 2021. A review of modern materials used in military camouflage within the radar frequency range. Technical Transactions. 118, art. e2021003, DOI: 10.37705/TechTrans/e202100310.37705/TechTrans/e2021003 Search in Google Scholar

Ulewicz, R., Szataniak, P., Novy, F., 2014. Fatigue Properties of Wear Resistant Martensitic Steel. METAL 2014: 23^rd International Conference on Metallurgy and Materials, 784-789. Search in Google Scholar

Wan, Y., Xiong, D. S., 2008. The effect of laser surface texturing on frictional performance of face seal. Journal of Materials Processing Technology. 197, 96-100.10.1016/j.jmatprotec.2007.06.019 Search in Google Scholar

Zajdel, P., 2021. A suitability assessment using an instrumented impact test of the use of selected structural steel grades on the basis of their changes in response to exposure to fire. Technical Transactions, 118, art. e2021007, DOI: 10.37705/TechTrans/e202100710.37705/TechTrans/e2021007 Search in Google Scholar