[
Aghajani, H., Hadavand, E., Peighambardoust, N.S., Khameneh-asl, S., 2020. Electro spark deposition of WC–TiC–Co–Ni cermet coatings on St52 steel. Surfaces and Interfaces, 18.10.1016/j.surfin.2019.100392
]Search in Google Scholar
[
Antoszewski, B., Radek, N., Tarelnik, W., Wajs, E., 2005. Electro discharge and laser texturing of sliding face of mechanical seals. IX International Conference HERVICON, Sumy, Ukraine, 15-123.
]Search in Google Scholar
[
Dudek, A., Kolan, C., 2010. Assessments of Shrinkage Degree in Bioceramic Sinters HA+ZrO(2). Mechatronic Systems and Materials: Materials Production Technologies, 165, 25-30.10.4028/www.scientific.net/SSP.165.25
]Search in Google Scholar
[
Dudek, A., Wlodarczyk, R., 2010. Structure and Properties of Bioceramics Layers used for Implant Coatings. Solid State Phenomena, 165, 31-36.10.4028/www.scientific.net/SSP.165.31
]Search in Google Scholar
[
Dwornicka, R., Radek, N., Krawczyk, M., Osocha, P., Pobedza, J., 2017. The Laser Textured Surfaces of the Silicon Carbide Analyzed with the Bootstrapped Tribology Model. METAL 2017, 26th International Conference on Metallurgy and Materials, 1252-1257.
]Search in Google Scholar
[
Dziopa, Z., Koruba, Z., 2015. The impact of launcher turret vibrations control on the rocket launch. Bulletin of the Polish Academy of Sciences-Technical Sciences, 63(3), 717-728.10.1515/bpasts-2015-0083
]Search in Google Scholar
[
Fabiś-Domagała, J., Domagała, M., Momeni, H., 2021. A matrix FMEA analysis of variable delivery vane pumps. Energies, 14(6), art. 1741.10.3390/en14061741
]Search in Google Scholar
[
Filo, G., Lisowski, E., Domagala, M., Fabis-Domagala, J., Momeni, H., 2018. Modelling of Pressure Pulse Generator with the Use of a Flow Control Valve and a Fuzzy Logic Controller. AIP Conf. Proc., 2029, art. 020015.10.1063/1.5066477
]Search in Google Scholar
[
Gadek-Moszczak, A., Radek, N., Wroński, S., Tarasiuk, J., 2014. Application the 3D Image Analysis Techniques for Assessment the Quality of Material Surface Layer before and after Laser Treatment. Advanced Materials Research., 874, 133-138.10.4028/www.scientific.net/AMR.874.133
]Search in Google Scholar
[
Galin, R., Khina, B., Shaburova, N., Wassilkowska, A., 2021. The formation of zinc coatings in nanocrystallised zinc powders. Technical Transactions, 118, art. e2021009, DOI: 10.37705/TechTrans/e202100910.37705/TechTrans/e2021009
]Search in Google Scholar
[
Guidoni, G., Dudek, A., Patsias, S., Anglada, M., 2005. Fracture behaviour of thermal barrier coatings after high temperature exposure in air. Materials Science and Engineering A, 397(1-2), 209-214.10.1016/j.msea.2005.02.022
]Search in Google Scholar
[
Klimecka-Tatar, D., Pawlowska, G., Szymura, S., 2010. Encapsulation as an effective prevention method of powder oxidation in bonded magnet technology. Ochrona Przed Korozja, 53(11), 585-588.
]Search in Google Scholar
[
Krzysztofik, I., Takosoglu, J., Koruba, Z., 2017. Selected methods of control of the scanning and tracking gyroscope system mounted on a combat vehicle. Annual Reviews in Control, 44, 173-182.10.1016/j.arcontrol.2016.10.003
]Search in Google Scholar
[
Kulis, C., Müller, J., 2020. Indoor air quality improvement in natural ventilation using a fuzzy logic controller. Technical Transactions, 117, art. e2020045, DOI: 10.37705/TechTrans/e202004510.37705/TechTrans/e2020045
]Search in Google Scholar
[
Markovic, S., Arsic, D., Nikolic, R.R., Lazic, V., Hadzima, B., Milovanovic, V.P., Dwornicka, R., Ulewicz, R., 2021. Exploitation Characteristics of Teeth Flanks of Gears Regenerated by Three Hard-Facing Procedures. Materials, 14(15), art. 4203.10.3390/ma14154203834814534361396
]Search in Google Scholar
[
Maruszczyk, A., Dudek, A., Szala, M., 2017. Research into Morphology and Properties of TiO2 - NiAl Atmospheric Plasma Sprayed Coating. Advances in Science and Technology-Research Journal, 11(3), 204-210.10.12913/22998624/76450
]Search in Google Scholar
[
Mysłek A., 2020. Crack propagation analysis in selected railway bogie components. Technical Transactions, 117, art. e2020017, DOI: 10.37705/TechTrans/e202001710.37705/TechTrans/e2020017
]Search in Google Scholar
[
Orman, L. J., 2009. Possibilities of Heat Transfer Enhancement in Automotive Heat Exchangers, Transport Means 2009: 116-119.
]Search in Google Scholar
[
Ostasz, G., Czerwinska, K., Pacana, A., 2020. Quality Management of Aluminum Pistons with the Use of Quality Control Points, Management Systems in Production Engineering, 28(1), 29-33.10.2478/mspe-2020-0005
]Search in Google Scholar
[
Pacana, A., Czerwinska, K., Dwornicka, R., 2019. Analysis of Non-Compliance for the Cast of the Industrial Robot Basis, 28th International Conference on Metallurgy and Materials, 644-650.10.37904/metal.2019.869
]Search in Google Scholar
[
Padgurskas, J., Kreivaitis, R., Rukuiža, R., Mihailov, V., Agafii, V., Kriūkienė, R., Baltušnikas, A., 2017. Tribological properties of coatings obtained by electro-spark alloying C45 steel surfaces, Surface and Coatings Technology, 311, 90-97.10.1016/j.surfcoat.2016.12.098
]Search in Google Scholar
[
Przestacki, D., Kuklinski, M., Bartkowska, A., 2017. Influence of laser heat treatment on microstructure and properties of surface layer of Waspaloy aimed for laser-assisted machining. International Journal of Advanced Manufacturing Technology, 93(9-12), 3111-3123.10.1007/s00170-017-0775-2
]Search in Google Scholar
[
Radek, N., 2010. Production of proper texture on the flat sliding pair surfaces by means of electro-erosion or laser treatment, Mechanik, 83(11), 822-825.
]Search in Google Scholar
[
Radek, N., Konstanty, J., Scendo, M., 2015. The electrospark deposited WCCu coatings modified by laser treatment. Archives of Metallurgy and Materials, 60, 2579-2584.10.1515/amm-2015-0417
]Search in Google Scholar
[
Radek, N., Szczotok, A., Gądek-Moszczak, A., Dwornicka, R., Bronček, J., Pietraszek, J., 2018. The impact of laser processing parameters on the properties of electro-spark deposited coatings. Archives of Metallurgy and Materials, 63, 809-816.
]Search in Google Scholar
[
Rączka, M., Pysz, S., Piotrowski, K., 2020. Guidelines for the manufacture of heavy ductile iron castings. Technical Transactions, 117, art. e2020044. DOI: 10.37705/TechTrans/e202004410.37705/TechTrans/e2020044
]Search in Google Scholar
[
Ryk, G., Etsion, I., 2006, Testing piston rings with partial laser surface texturing for friction reduction. Wear, 261, 792-796.10.1016/j.wear.2006.01.031
]Search in Google Scholar
[
Salmaliyan, M., Malek Ghaeni, F., Ebrahimnia, M., 2017. Effect of electro spark deposition process parameters on WC-Co coating on H13 steel. Surface and Coatings Technology, 321, 81-89.10.1016/j.surfcoat.2017.04.040
]Search in Google Scholar
[
Skrzypczak, L., Skrzypczak-Pietraszek, E., Lamerzarawska, E., Hojden, B., 1994. Micropropagation of Oenothera-Biennis L and an Assay of Fatty-Acids. Acta Societatis Botanicorum Poloniae, 63(2), 173-177.10.5586/asbp.1994.023
]Search in Google Scholar
[
Skrzypczak-Pietraszek, E., Hensel, A., 2000. Polysaccharides from Melittis melissophyllum L. herb and callus. Pharmazie, 55(10), 768-771.
]Search in Google Scholar
[
Styrylska, T., Pietraszek, J., 1992. Numerical Modeling of Non Steady State Temperature Fields with Supplementary Data. Zeitschrift für Angewandte Mathematik und Mechanik, 72(6), T537-T539.
]Search in Google Scholar
[
Szczodrowska, B., Mazurczuk, R., 2021. A review of modern materials used in military camouflage within the radar frequency range. Technical Transactions. 118, art. e2021003, DOI: 10.37705/TechTrans/e202100310.37705/TechTrans/e2021003
]Search in Google Scholar
[
Ulewicz, R., Szataniak, P., Novy, F., 2014. Fatigue Properties of Wear Resistant Martensitic Steel. METAL 2014: 23rd International Conference on Metallurgy and Materials, 784-789.
]Search in Google Scholar
[
Wan, Y., Xiong, D. S., 2008. The effect of laser surface texturing on frictional performance of face seal. Journal of Materials Processing Technology. 197, 96-100.10.1016/j.jmatprotec.2007.06.019
]Search in Google Scholar
[
Zajdel, P., 2021. A suitability assessment using an instrumented impact test of the use of selected structural steel grades on the basis of their changes in response to exposure to fire. Technical Transactions, 118, art. e2021007, DOI: 10.37705/TechTrans/e202100710.37705/TechTrans/e2021007
]Search in Google Scholar