Logowanie
Zarejestruj się
Zresetuj hasło
Publikuj i Dystrybuuj
Rozwiązania Wydawnicze
Rozwiązania Dystrybucyjne
Dziedziny
Architektura i projektowanie
Bibliotekoznawstwo i bibliologia
Biznes i ekonomia
Chemia
Chemia przemysłowa
Filozofia
Fizyka
Historia
Informatyka
Inżynieria
Inżynieria materiałowa
Językoznawstwo i semiotyka
Kulturoznawstwo
Literatura
Matematyka
Medycyna
Muzyka
Nauki farmaceutyczne
Nauki klasyczne i starożytne studia bliskowschodnie
Nauki o Ziemi
Nauki o organizmach żywych
Nauki społeczne
Prawo
Sport i rekreacja
Studia judaistyczne
Sztuka
Teologia i religia
Zagadnienia ogólne
Publikacje
Czasopisma
Książki
Materiały konferencyjne
Wydawcy
Blog
Kontakt
Wyszukiwanie
EUR
USD
GBP
Polski
English
Deutsch
Polski
Español
Français
Italiano
Koszyk
Home
Czasopisma
Studia Geotechnica et Mechanica
Tom 46 (2024): Zeszyt 2 (June 2024)
Otwarty dostęp
Terrestrial laser scanning in the construction of a numerical model geometry related to underground post-mining facility
Maciej Bodlak
Maciej Bodlak
oraz
Jakub Izydorski
Jakub Izydorski
| 07 cze 2024
Studia Geotechnica et Mechanica
Tom 46 (2024): Zeszyt 2 (June 2024)
O artykule
Poprzedni artykuł
Następny artykuł
Abstrakt
Artykuł
Ilustracje i tabele
Referencje
Autorzy
Artykuły w tym zeszycie
Podgląd
PDF
Zacytuj
Udostępnij
Article Category:
Original Study
Data publikacji:
07 cze 2024
Zakres stron:
125 - 134
Otrzymano:
03 kwi 2024
Przyjęty:
10 maj 2024
DOI:
https://doi.org/10.2478/sgem-2024-0007
Słowa kluczowe
Terrestrial laser scanning
,
numerical modeling
,
mine survey
© 2024 Maciej Bodlak et al., published by Sciendo
This work is licensed under the Creative Commons Attribution 4.0 International License.
Figure 1:
Visualization of the entrance to the underground track “St. Johannes” Mine in Krobica (Kobylańska, 2012).
Figure 2:
Location of the scanned 7.5-m fragment of the adit on the underground track “St. Johannes” Mine in Krobica. In the vicinity of the measurement site, there is a shaft connecting both adits (St. Leopold below and St John above).
Figure 3:
Trimble TX8 laser scanner during measurements in the St. John adit.
Figure 4:
The intensity of the laser beam reflection in the adit (the black spot is a fragment of the sidewall closer than 60 cm from the scanner).
Figure 5:
“Point cloud” visualization of a fragment of the St. John adit, displayed by the value of the reflection intensity parameter.
Figure 6:
(a–c) Generating 2D cross sections from (a) “point cloud” in CloudCompare software and (d, e) dimensioning of a selected characteristic cross section.
Figure 7:
(a, b) Creating the cross sectional geometry of the scanned fragment of the adit and (c, d) its discretization in FLAC 3D Itasca v.9.0 software, sketch option.
Figure 8:
Geometry obtained for the quasi-3D numerical model of the underground excavation in the FLAC 3D Itasca v.9.0 program.