The Use of CPTU and DMT Methods to Determine Soil Deformation Moduli—Perspectives and Limitations

[1] Baldi G., Belotti R., Ghionna V.N., Jamiolkowski M., Lo Presti D.C.F. (1989). Modulus of sand from CPT’s and DMT’s. Proc. of 12th International Conference on Soil Mechanics and Foundation Engineering, Rio de Janeiro, Brazil, Balkema, Rotterdam, vol. 1, 165–179. BaldiG. BelottiR. GhionnaV.N. JamiolkowskiM. Lo PrestiD.C.F. 1989 Modulus of sand from CPT’s and DMT’s Proc. of 12th International Conference on Soil Mechanics and Foundation Engineering Rio de Janeiro, Brazil, Balkema, Rotterdam 1 165 179 Search in Google Scholar

[2] Baligh M.M. (1975). Theory of deep static cone penetration resistance. Department of Civil and Environmental Engineering Massachusetts. Institute of Technology. Report No R, 75–56. BalighM.M. 1975 Theory of deep static cone penetration resistance Department of Civil and Environmental Engineering Massachusetts. Institute of Technology Report No R, 75 56 Search in Google Scholar

[3] Banach S. (1950). Mechanika. Monografie matematyczne, Czytelnik, Kraków (in Polish). BanachS. 1950 Mechanika. Monografie matematyczne Czytelnik Kraków (in Polish) Search in Google Scholar

[4] Bogucki A. Voloshyn P., Tomeniuk O. (2014). Zapadowość plejstoceńskich poziomów lessowo-glebowych i kriogenicznych Wołynia i Podola. Przegląd Geologiczny Nr.10/2, t. 62, 553–559. BoguckiA. VoloshynP. TomeniukO. 2014 Zapadowość plejstoceńskich poziomów lessowo-glebowych i kriogenicznych Wołynia i Podola Przegląd Geologiczny 10/2 62 553 559 Search in Google Scholar

[5] Box G.E.P., Hunter, W.G., Hunter J.S. (1978). Statistics for experiments – an introduction to design, data analysis and model building. John Wiley & Sons, New York. BoxG.E.P. HunterW.G. HunterJ.S. 1978 Statistics for experiments – an introduction to design, data analysis and model building John Wiley & Sons New York Search in Google Scholar

[6] Draper N.R., Smith H. (1981). Applied regression analysis. John Wiley & Sons, New York. DraperN.R. SmithH. 1981 Applied regression analysis John Wiley & Sons New York Search in Google Scholar

[7] Durgunoglu M.T., Mitchell J.K. (1973). Static penetration resistance of soils. University of California, Berkley, Report No 14/24. DurgunogluM.T. MitchellJ.K. 1973 Static penetration resistance of soils University of California Berkley Report No 14/24. Search in Google Scholar

[8] Eslaamizaad, S, Robertson, P.K. (1996). Cone penetration test to evaluate bearing capacity of foundations in sands, Proc. of 49th Canadian Geotechnical Society, 429–438. EslaamizaadS RobertsonP.K. 1996 Cone penetration test to evaluate bearing capacity of foundations in sands Proc. of 49th Canadian Geotechnical Society 429 438 Search in Google Scholar

[9] Frankowski Z., Majer E., Pietrzkowski P. (2010). Geological and geotechnical problem of loess deposits from south-eastern Poland. Proc. of the International Geotechnical Conference “Geotechnical challenges in megacities”, vol. 2, Moscow, 546 – 553. FrankowskiZ. MajerE. PietrzkowskiP. 2010 Geological and geotechnical problem of loess deposits from south-eastern Poland Proc. of the International Geotechnical Conference “Geotechnical challenges in megacities” 2 Moscow 546 553 Search in Google Scholar

[10] Gauer P., Lunne T., Młynarek Z., Wołyński W., Kroll M. (2002). Quality of CPTU – statistical analyses of CPTU data from Onsoy. NGI, Report No 20001099, Oslo. GauerP. LunneT. MłynarekZ. WołyńskiW. KrollM. 2002 Quality of CPTU – statistical analyses of CPTU data from Onsoy NGI Report No 20001099, Oslo Search in Google Scholar

[11] Godlewski T., Szczepański T. (2013). Determination of soil stiffness parameters using in-situ seismic methods-insight in repeatability and methodological aspects. R. Q. Coutinho & P.W. Mayne (eds.) Geotechnical and Geophysical Site Characterization 4,. Proc. of 4th International Conference on Geotechnical and Geophisical Site Investigations. Taylor & Francis Group, London, 441–446. GodlewskiT. SzczepańskiT. 2013 Determination of soil stiffness parameters using in-situ seismic methods-insight in repeatability and methodological aspects CoutinhoR. Q. MayneP.W. (eds.) Geotechnical and Geophysical Site Characterization 4,. Proc. of 4th International Conference on Geotechnical and Geophisical Site Investigations Taylor & Francis Group London 441 446 Search in Google Scholar

[12] Guidelines for Design of Wind-Turbines – DNV/Risa (2002). Det Norske Veritas, Copenhagen Guidelines for Design of Wind-Turbines – DNV/Risa 2002 Det Norske Veritas Copenhagen Search in Google Scholar

[13] Hardin B.O. 1978. The nature of stress-strain behaviour for soils. Proc. ASCE Geotechnical Div. Specialty Conf. on Earthquake Eng. and Soil Dynamics, Pasadena. 1, 3–90. HardinB.O. 1978 The nature of stress-strain behaviour for soils Proc. ASCE Geotechnical Div. Specialty Conf. on Earthquake Eng. and Soil Dynamics Pasadena 1 3 90 Search in Google Scholar

[14] Hegazy Y.A., Mayne P.W. (1995). Statistical correlations between Vs and CPT data for different soil types. Proc. of Symposium on Cone Penetration Testing (CPT’95), Swedish Geotechnical Society, Linkoping, Vol. 2, 173–178. HegazyY.A. MayneP.W. 1995 Statistical correlations between Vs and CPT data for different soil types Proc. of Symposium on Cone Penetration Testing (CPT’95) Swedish Geotechnical Society, Linkoping 2 173 178 Search in Google Scholar

[15] Jamiolkowski M. Lo Presti D.C.F., Manassero M. (2001). Evaluation of relative density and shear strength of sands from CPT and DMT. CC. Ladd Symposium, Cambridge, Massachusetts. JamiolkowskiM. Lo PrestiD.C.F. ManasseroM. 2001 Evaluation of relative density and shear strength of sands from CPT and DMT CC. Ladd Symposium Cambridge, Massachusetts Search in Google Scholar

[16] Kardan C. Viking K., Nik L., Larsson S. (2016). Influence of operator performance on quality of CPTU results. Proc. of 17th Nordic Geotechnical Meeting, Challenges in Nordic Geotechnic, 25th – 28th of May 2016, Reykjavik, 153–158. KardanC. VikingK. NikL. LarssonS. 2016 Influence of operator performance on quality of CPTU results Proc. of 17th Nordic Geotechnical Meeting, Challenges in Nordic Geotechnic 25th – 28th of May 2016 Reykjavik 153 158 Search in Google Scholar

[17] Karslud K., Lunne T., Kert A., Strandvik S. (2005). CPTU correlation for clays. Proc. of XVIth International Conference on Soil Mechanics and Geotechnical Engineering, Osaka, 693–702. KarsludK. LunneT. KertA. StrandvikS. 2005 CPTU correlation for clays Proc. of XVIth International Conference on Soil Mechanics and Geotechnical Engineering Osaka 693 702 Search in Google Scholar

[18] Keaveny I., Mitchell J.K. (1986) Strength of fine-grained soils using the piezo cone. Use of in-situ tests in Geotechnical Engineering (GSP 6), ASCE, 668–685. KeavenyI. MitchellJ.K. 1986 Strength of fine-grained soils using the piezo cone Use of in-situ tests in Geotechnical Engineering (GSP 6) ASCE 668 685 Search in Google Scholar

[19] Krage, C.P., Broussard, N.S. i DeJong, J.T. (2014). Estimating rigidity index (IR) based on CPT measurements. Proc. of 3rd International Symposium on Cone Penetration Testing. Las Vegas, Nevada, 727–735. KrageC.P. BroussardN.S. DeJongJ.T. 2014 Estimating rigidity index (IR) based on CPT measurements Proc. of 3rd International Symposium on Cone Penetration Testing Las Vegas, Nevada 727 735 Search in Google Scholar

[20] Krygowski B. (1961). Geografia fizyczna Niziny Wielkopolskiej: Geomorfologia, Część 1. Państwowe Wydawnictwo Naukowe, Warszawa (in Polish). KrygowskiB. 1961 Geografia fizyczna Niziny Wielkopolskiej: Geomorfologia, Część 1 Państwowe Wydawnictwo Naukowe Warszawa (in Polish) Search in Google Scholar

[21] Kulhavy F.H., Mayne P.H. (1990). Manual on estimating soil properties for foundation design. Electro Power Research Institute Research Project 1493-6, EPRI, Palo Alto, Cal. KulhavyF.H. MayneP.H. 1990 Manual on estimating soil properties for foundation design Electro Power Research Institute Research Project 1493-6 EPRI Palo Alto, Cal. Search in Google Scholar

[22] Lacasse S, Nadim, F. (1994). Reliability issues and future challenges in geotechnical engineering for offshore structures. In: International Conference. Behaviour of offshore structures. Boss94, Cambridge Mass. LacasseS NadimF. 1994 Reliability issues and future challenges in geotechnical engineering for offshore structures In: International Conference. Behaviour of offshore structures Boss94, Cambridge Mass Search in Google Scholar

[23] Lechowicz Z., Rabarijoely S., Galas P., Kiziewicz D. (2011). Settlement evaluation of spread foundation on heavily preconsolidated cohesive soils. Annals of Warsaw University of Life Sciences – SGGW, Land Reclamation, No 43(2), 113–120. LechowiczZ. RabarijoelyS. GalasP. KiziewiczD. 2011 Settlement evaluation of spread foundation on heavily preconsolidated cohesive soils Annals of Warsaw University of Life Sciences – SGGW, Land Reclamation 43 2 113 120 Search in Google Scholar

[24] Lee J. K. (1974). Soil Mechanics – New Horizons, Chapter 3. Lumb P. (ed.) Application of statistics in soil mechanics. Newness – Butterworth, London LeeJ. K. 1974 Soil Mechanics – New Horizons, Chapter 3 LumbP. (ed.) Application of statistics in soil mechanics Newness – Butterworth London Search in Google Scholar

[25] Lee S.H.H, Stoke K.H. (1986). Investigation of low amplitude shear wave velocity in anisotropic materials. Geotechnical Report No. GR 86-6, Civil Engineering Department, University of Texas, Austin. LeeS.H.H StokeK.H. 1986 Investigation of low amplitude shear wave velocity in anisotropic materials Geotechnical Report No. GR 86-6 Civil Engineering Department, University of Texas Austin Search in Google Scholar

[26] Lindgård, A., Gundersen, A., Lunne, T., L Heureux, J. S., Kåsin, K., Haugen, E., Emdal, A., Carlson, M., Veldhuijzen, A., Massimiliano, S. (2018). Effect of cone type on measured CPTU results from the Tiller-Flotten quick clay test site. Fjellsprengningsteknikk, Bergmekanikk/Geoteknikk. Norwegian Geotechnical Society (NGF), Oslo, Norway. LindgårdA. GundersenA. LunneT. L HeureuxJ. S. KåsinK. HaugenE. EmdalA. CarlsonM. VeldhuijzenA. MassimilianoS. 2018 Effect of cone type on measured CPTU results from the Tiller-Flotten quick clay test site Fjellsprengningsteknikk, Bergmekanikk/Geoteknikk Norwegian Geotechnical Society (NGF) Oslo, Norway Search in Google Scholar

[27] Long M. (2002). The Quality of Continuous Soil Samples. Geotechnical Testing Journal, vol. 25, No 3, 1–18. LongM. 2002 The Quality of Continuous Soil Samples Geotechnical Testing Journal 25 3 1 18 Search in Google Scholar

[28] Lunne T., Berre T., Andersen K.H., Strandvik S., Sjursen M. (2005). Effect of sample disturbance and consolidation procedures on measured shear strength of soft marine Norwegian clays. Canadian Geotechnical Journal, 1–50. LunneT. BerreT. AndersenK.H. StrandvikS. SjursenM. 2005 Effect of sample disturbance and consolidation procedures on measured shear strength of soft marine Norwegian clays Canadian Geotechnical Journal 1 50 Search in Google Scholar

[29] Lunne T. Strandvik S., Kasin K., L’Heureux J.S, Haugen E., Uruci E., Veldhuijzen A., Carlson M., Kassner M. (2018). Effect of cone penetrometer type on CPTU results at a Soft Clay Test Site in Norway. Cone Penetration Testing 2018 – Hicks, Pisanò & Peuchen (Eds), CRC Press, 417–422. LunneT. StrandvikS. KasinK. L’HeureuxJ.S HaugenE. UruciE. VeldhuijzenA. CarlsonM. KassnerM. 2018 Effect of cone penetrometer type on CPTU results at a Soft Clay Test Site in Norway Cone Penetration Testing 2018 Hicks Pisanò Peuchen (Eds), CRC Press 417 422 Search in Google Scholar

[30] Lunne T., Christophersen H.P. (1983). Interpretation of cone penetrometer data for offshore sands. Proc. of the Offshore Technology Conference, Richardson, Texas. LunneT. ChristophersenH.P. 1983 Interpretation of cone penetrometer data for offshore sands Proc. of the Offshore Technology Conference Richardson, Texas Search in Google Scholar

[31] Lunne T., Robertson P.K., Powell J. (1997). Cone penetration testing in geotechnical practice. E&FN Spon, London. LunneT. RobertsonP.K. PowellJ. 1997 Cone penetration testing in geotechnical practice E&FN Spon London Search in Google Scholar

[32] Marchetti S. (1980). In situ tests by flat dilatometer. ASCE, JGED, v. 106, No.GT3. MarchettiS. 1980 In situ tests by flat dilatometer ASCE, JGED 106 GT3 Search in Google Scholar

[33] Marchetti S. (1998). Dilatometer Testing (DMT) One-day short course. International Conference on Site Characterization, Atlanta. MarchettiS. 1998 Dilatometer Testing (DMT) One-day short course International Conference on Site Characterization Atlanta Search in Google Scholar

[34] Marchetti S. (2012). The Seismic Dilatometer for in-situ soil investigations. Proc. of Indian Geotechnical Conference, December 3–15, 2012, Delhi, Paper No. C312. MarchettiS. 2012 The Seismic Dilatometer for in-situ soil investigations Proc. of Indian Geotechnical Conference December 3–15, 2012 Delhi Paper No. C312. Search in Google Scholar

[35] Marchetti S., Monaco P., Totani G., Marchetti D. (2008). In-situ tests by seismic dilatometer (SDMT). Geotech. Spec. Pub. GSP 180, From Research to Practice in Geotechnical Engineering, 8–11. MarchettiS. MonacoP. TotaniG. MarchettiD. 2008 In-situ tests by seismic dilatometer (SDMT). Geotech. Spec. Pub. GSP 180 From Research to Practice in Geotechnical Engineering 8 11 Search in Google Scholar

[36] Massarsch, K. R. 2004. Deformation properties of fine-grained soils from seismic tests. Keynote lecture International Conference on Site Characterization, ISC’2, 19 – 22 Sept. 2004, Porto. MassarschK. R. 2004 Deformation properties of fine-grained soils from seismic tests Keynote lecture International Conference on Site Characterization, ISC’2 19 – 22 Sept. 2004 Porto Search in Google Scholar

[37] Mayne P. W. (2001). Stress-strain-strength flow parameters from enhanced in-situ tests. Proc. of The International Conference on In-situ Measurement of Soil Properties and Case Histories. Bali, p. 27–48. MayneP. W. 2001 Stress-strain-strength flow parameters from enhanced in-situ tests Proc. of The International Conference on In-situ Measurement of Soil Properties and Case Histories Bali 27 48 Search in Google Scholar

[38] Mayne P. W. (2006). In-situ test calibration for evaluating soil parameters. In-situ testing. Singapore Workshop, 1–56. MayneP. W. 2006 In-situ test calibration for evaluating soil parameters In-situ testing. Singapore Workshop 1 56 Search in Google Scholar

[39] Mitchell J.K., Gardner (1975) In-situ measurements of volume changes characteristics. Proc. of ASCE Conference on In-situ Measurements of Soil Properties. North Carolina State University, Raleigh, Vol. II, 279–345. MitchellJ.K. Gardner 1975 In-situ measurements of volume changes characteristics Proc. of ASCE Conference on In-situ Measurements of Soil Properties North Carolina State University, Raleigh II 279 345 Search in Google Scholar

[40] Młynarek Z. (1978) Czynniki wpływające na opór stożka podczas statycznego sondowania gruntów spoistych. Roczniki Akademii Rolniczej w Poznaniu, z.83 (in Polish). MłynarekZ. 1978 Czynniki wpływające na opór stożka podczas statycznego sondowania gruntów spoistych Roczniki Akademii Rolniczej w Poznaniu z.83 (in Polish). Search in Google Scholar

[41] Młynarek Z. (2007). Site investigation and mapping in urban area. Proc. of 14th European Conference on Soil Mechanics and Geotechnical Engineering, Madrid. Vol. 1 Edited by V. Cuéllar et al. Millpress Science Publishers, Rotterdam, 175–202. MłynarekZ. 2007 Site investigation and mapping in urban area Proc. of 14th European Conference on Soil Mechanics and Geotechnical Engineering Madrid 1 Edited by CuéllarV. Millpress Science Publishers Rotterdam 175 202 Search in Google Scholar

[42] Młynarek Z. (2009). Podłoże gruntowe, a awaria budowlana. Proc. of Konferencja Naukowo-Techniczna „Awarie Budowlane”, Szczecin-Międzyzdroje 2009 (in Polish). MłynarekZ. 2009 Podłoże gruntowe, a awaria budowlana Proc. of Konferencja Naukowo-Techniczna „Awarie Budowlane” Szczecin-Międzyzdroje 2009 (in Polish). Search in Google Scholar

[43] Młynarek Z. (2010) Quality of in-situ and laboratory test contribution to risk management. Proc. of 14th Danube European Conference on Geotechnical Engineering. Bratislava, Slovakia, 2010. MłynarekZ. 2010 Quality of in-situ and laboratory test contribution to risk management Proc. of 14th Danube European Conference on Geotechnical Engineering Bratislava, Slovakia 2010 Search in Google Scholar

[44] Młynarek Z. Stefaniak K., Wierzbicki J. (2012) Geotechnical parameters of alluvial soils from In-situ tests. Archives of Hydro-Engineering and Environmental Mechanics, vol.59, no. 1–2, 63–81. MłynarekZ. StefaniakK. WierzbickiJ. 2012 Geotechnical parameters of alluvial soils from In-situ tests Archives of Hydro-Engineering and Environmental Mechanics 59 1–2 63 81 Search in Google Scholar

[45] Młynarek Z. (2010). Regional report for East European countries. Proc. 2nd International Symposium on Cone Penetration Testing, Huntington Beach, CA, USA. MłynarekZ. 2010 Regional report for East European countries Proc. 2nd International Symposium on Cone Penetration Testing Huntington Beach, CA, USA Search in Google Scholar

[46] Młynarek Z., Gogolik S., Gryczmański M., Uliniarz R. (2013) Settlement analysis of a cylindrical tank based on CPTU and SDMT results. Proc. of 4th Int. Conference Geotechnical Site Characterization. Recife, Frances Taylor, 2013, 1585–1590. MłynarekZ. GogolikS. GryczmańskiM. UliniarzR. 2013 Settlement analysis of a cylindrical tank based on CPTU and SDMT results Proc. of 4th Int. Conference Geotechnical Site Characterization Recife, Frances Taylor 2013 1585 1590 Search in Google Scholar

[47] Młynarek Z., Niedzielski A., Tschuschke W. (1982). The static penetration results of varved clays. Proc. of Second European Symposium on Penetration Testing, Amsterdam, Balkema, 715–720. MłynarekZ. NiedzielskiA. TschuschkeW. 1982 The static penetration results of varved clays Proc. of Second European Symposium on Penetration Testing Amsterdam, Balkema 715 720 Search in Google Scholar

[48] Młynarek Z., Sanglerat G. (1981). The Bearing capacity equation for static sounding of Pliocene Clays. Proc. of 10th International Conference on Soil Mechanics and Foundation Engineering, Stockholm, 523–526. MłynarekZ. SangleratG. 1981 The Bearing capacity equation for static sounding of Pliocene Clays Proc. of 10th International Conference on Soil Mechanics and Foundation Engineering Stockholm 523 526 Search in Google Scholar

[49] Młynarek Z., Tschuschke W., Wierzbicki J., Marchetti S. (2006). An Interrelationships between shear and deformation parameters of gytia and peat from CPT and DMT tests. Proc. of XII Danube European Conference on Geotechnical Engineering, Ljubliana 2006, 89–95. MłynarekZ. TschuschkeW. WierzbickiJ. MarchettiS. 2006 An Interrelationships between shear and deformation parameters of gytia and peat from CPT and DMT tests Proc. of XII Danube European Conference on Geotechnical Engineering Ljubliana 2006 89 95 Search in Google Scholar

[50] Młynarek Z., Wierzbicki J., Bogucki M. (2015). Geotechnical characterization of peat and gyttja by Means of Different In-situ Tests. Proc. of the XVI ECSMGE Geotechnical Engineering for Infrastructure and Development, Edinburgh, 3097–3102. MłynarekZ. WierzbickiJ. BoguckiM. 2015 Geotechnical characterization of peat and gyttja by Means of Different In-situ Tests Proc. of the XVI ECSMGE Geotechnical Engineering for Infrastructure and Development Edinburgh 3097 3102 Search in Google Scholar

[51] Młynarek Z., Wierzbicki J., Long M. (2008). Factors affecting CPTU and DMT characteristics in organic soils. Proc. of the 11th Baltic Sea Geotechnical Conference. (Eds: Z. Młynarek, Z. Sikora & E. Dembicki). Vol. 1, 407–417. MłynarekZ. WierzbickiJ. LongM. 2008 Factors affecting CPTU and DMT characteristics in organic soils Proc. of the 11th Baltic Sea Geotechnical Conference Eds: MłynarekZ. SikoraZ. DembickiE. 1 407 417 Search in Google Scholar

[52] Młynarek Z., Wierzbicki J., Lunne T. (2016) On the influence of overconsolidation effect on the compressibility assessment of subsoil by means of CPTU and DMT, Annals of Warsaw University of Life Sciences, Land Reclamation No 48 (3), 189–200. MłynarekZ. WierzbickiJ. LunneT. 2016 On the influence of overconsolidation effect on the compressibility assessment of subsoil by means of CPTU and DMT, Annals of Warsaw University of Life Sciences Land Reclamation 48 3 189 200 Search in Google Scholar

[53] Młynarek Z., Wierzbicki J., Lunne T. (2021). Usefulness of the CPTU method in evaluating shear modulus G₀ changes in the subsoil. Studia Geotechnica et Mechanica, 2021. 195–205. MłynarekZ. WierzbickiJ. LunneT. 2021 Usefulness of the CPTU method in evaluating shear modulus G₀ changes in the subsoil Studia Geotechnica et Mechanica 2021 195 205 Search in Google Scholar

[54] Młynarek Z., Wierzbicki J., Mańka M. (2015). Constrained, deformation and shear moduli of loesses from CPTU and SDMT tests. Proc. of 3rd International Conference on the Flat Dilatometer, Rome 2015, 579. MłynarekZ. WierzbickiJ. MańkaM. 2015 Constrained, deformation and shear moduli of loesses from CPTU and SDMT tests Proc. of 3rd International Conference on the Flat Dilatometer Rome 2015 579 Search in Google Scholar

[55] Młynarek Z., Wierzbicki J., Monaco P. (2022). Use of the DMT and CPTU method to assess the G₀ profile in the subsoil. Proc. of International Conference, Cone Penetration Testing, Bologne, Gottardi Guido, Tonni Laura (eds.): Cone Penetration Testing 2022, 2022, London, Taylor & Francis Group, CRC Press, 570–576. MłynarekZ. WierzbickiJ. MonacoP. 2022 Use of the DMT and CPTU method to assess the G₀ profile in the subsoil Proc. of International Conference, Cone Penetration Testing Bologne, Gottardi Guido, Tonni Laura (eds.): Cone Penetration Testing 2022, 2022, London Taylor & Francis Group, CRC Press 570 576 Search in Google Scholar

[56] Młynarek Z., Wierzbicki J., Stefaniak K. (2013). Deformation characteristics of the overconsolidated subsoil form CPTU and SDMT tests. Geotechnical and Geophysical Site Characterization 4 – Proc. of the 4th International Conference on Site Characterization 4, ISC-4, 2013. Taylor&Francis Group, London, vol. 2, 1189–1193. MłynarekZ. WierzbickiJ. StefaniakK. 2013 Deformation characteristics of the overconsolidated subsoil form CPTU and SDMT tests Geotechnical and Geophysical Site Characterization 4 – Proc. of the 4th International Conference on Site Characterization 4, ISC-4 2013 Taylor&Francis Group London 2 1189 1193 Search in Google Scholar

[57] Młynarek Z., Wierzbicki J., Stefaniak K. (2018). Czynniki wpływające na ocenę wskaźnika sztywności (I_R) z badań in-situ. Acta Sci. Pol. Architectura, 17(3), 17–26. MłynarekZ. WierzbickiJ. StefaniakK. 2018 Czynniki wpływające na ocenę wskaźnika sztywności (I_R) z badań in-situ Acta Sci. Pol. Architectura 17 3 17 26 Search in Google Scholar

[58] Młynarek Z., Wierzbicki J., Wołyński W. (2005). Use of interpolation methods for geotechnical profiling. Studia Geotechnica et Mechanica, vol. XXVII, No 3–4, 5–13. MłynarekZ. WierzbickiJ. WołyńskiW. 2005 Use of interpolation methods for geotechnical profiling Studia Geotechnica et Mechanica XXVII 3–4 5 13 Search in Google Scholar

[59] Młynarek Z., Wierzbicki J., Wołyński W. (2007). An approach to 3D subsoil model based on CPTU results. Proc. of 14th European Conference on Soil Mechanics and Geotechnical Engineering, Madrid. Vol. 3. Millpress, Rotterdam, 1721–1726. MłynarekZ. WierzbickiJ. WołyńskiW. 2007 An approach to 3D subsoil model based on CPTU results Proc. of 14th European Conference on Soil Mechanics and Geotechnical Engineering Madrid 3 Millpress Rotterdam 1721 1726 Search in Google Scholar

[60] Młynarek Z., Sanglerat G., Sanglerat Th. (1982). The statistical analysis of certain factors influencing cone resistance during static sounding of cohesive soils. Proc of 2nd European Symposium on Penetration Testing. Balkema, Amsterdam, 821–834. MłynarekZ. SangleratG. SangleratTh. 1982 The statistical analysis of certain factors influencing cone resistance during static sounding of cohesive soils Proc of 2nd European Symposium on Penetration Testing Balkema, Amsterdam 821 834 Search in Google Scholar

[61] Monaco P., Totani G., Calabrese M. (2007). DMT-Predicted vs Observed Settlements: A review of the available experience. Studia Geotechnica et Mechanica vol. XXIX No 1–2, 103–120. MonacoP. TotaniG. CalabreseM. 2007 DMT-Predicted vs Observed Settlements: A review of the available experience Studia Geotechnica et Mechanica XXIX 1–2 103 120 Search in Google Scholar

[62] Paniagua P., Lunne T., Gundersen A., Heureux L., Kasin K. (2021) CPTU results at a silt test site in Norway: effect of cone penetrometer type. IOP Conf. Ser.: Earth Environ. Sci. Volume 710, 18th Nordic Geotechnical Meeting 18–19 January 2021, Helsinki, Finland, 1–10. PaniaguaP. LunneT. GundersenA. HeureuxL. KasinK. 2021 CPTU results at a silt test site in Norway: effect of cone penetrometer type IOP Conf. Ser.: Earth Environ. Sci. Volume 710, 18th Nordic Geotechnical Meeting 18–19 January 2021 Helsinki, Finland 1 10 Search in Google Scholar

[63] Powel J.M., Lunne T. (2005). A comparison of different piezo cones in UK clays. Proc. of the 16th International Conference on Soil Mechanics and Geotechnical Engineering, Osaka, Millpress Science Publishers/IOS Press, 729–734. PowelJ.M. LunneT. 2005 A comparison of different piezo cones in UK clays Proc. of the 16th International Conference on Soil Mechanics and Geotechnical Engineering Osaka Millpress Science Publishers/IOS Press 729 734 Search in Google Scholar

[64] Powell J.M. (2005). In situ testing. General report. Proc. of the 16th International Conference on Soil Mechanics and Geotechnical Engineering, Osaka, Millpress Science Publishers/IOS Press, 729–734. PowellJ.M. 2005 In situ testing. General report Proc. of the 16th International Conference on Soil Mechanics and Geotechnical Engineering Osaka Millpress Science Publishers/IOS Press 729 734 Search in Google Scholar

[65] Rabarijoely S. (1999). Wykorzystanie badań dylatometrycznych do wyznaczania parametrów gruntów organicznych obciążonych nasypem. PhD Thesis SGGW University Warsaw (in Polish). RabarijoelyS. 1999 Wykorzystanie badań dylatometrycznych do wyznaczania parametrów gruntów organicznych obciążonych nasypem PhD Thesis SGGW University Warsaw (in Polish) Search in Google Scholar

[66] Robertson P. (2009). Interpretation of cone penetration tests – a unified approach. Canadian Geotechnical Journal, 46, 1337–1355. RobertsonP. 2009 Interpretation of cone penetration tests – a unified approach Canadian Geotechnical Journal 46 1337 1355 Search in Google Scholar

[67] Robertson P.K, Cabal K.L. (2012). Guide to cone penetration testing for geotechnical engineering. Greg Drilling&Testing, Inc. RobertsonP.K CabalK.L. 2012 Guide to cone penetration testing for geotechnical engineering Greg Drilling&Testing, Inc. Search in Google Scholar

[68] Rząsa S., Młynarek Z. (1968). Właściwości fizyczne glin zwałowych zlodowacenia środkowopolskiego (Riss) Niziny Wielkopolskiej. Poznańskie Towarzystwo Przyjaciół Nauk Rolniczych i Leśnych, T. XXIV, Poznań, (in Polish). RząsaS. MłynarekZ. 1968 Właściwości fizyczne glin zwałowych zlodowacenia środkowopolskiego (Riss) Niziny Wielkopolskiej Poznańskie Towarzystwo Przyjaciół Nauk Rolniczych i Leśnych XXIV Poznań (in Polish). Search in Google Scholar

[69] Rzeźniczak, J., Młynarek, Z., Gogolik, S., & Michalak, J. (2019). Causes of failure of a four-store building and reconstruction concept. MATEC Web of conferences 284, 03008. ICSF Singh, S. (2020). Different causes of foundation failure. Civil Engineering Web. RzeźniczakJ. MłynarekZ. GogolikS. MichalakJ. 2019 Causes of failure of a four-store building and reconstruction concept MATEC Web of conferences 284 03008 ICSF Singh, S. (2020). Different causes of foundation failure. Civil Engineering Web. Search in Google Scholar

[70] Sandbarkken G., Berre T., Lacasse S. (1986). Oedometer testing of the Norwegian Geotechnical Institute. Consolidation of soils; testing and evaluations. ASTM Special Technical Publication, 892. SandbarkkenG. BerreT. LacasseS. 1986 Oedometer testing of the Norwegian Geotechnical Institute. Consolidation of soils; testing and evaluations ASTM Special Technical Publication 892 Search in Google Scholar

[71] Sanglerat G. (1972). The Penetrometer and Soil Exploration, Elsevier, Amsterdam. SangleratG. 1972 The Penetrometer and Soil Exploration Elsevier Amsterdam Search in Google Scholar

[72] Senneset K., Janbu N., Svano G. (1982). Strength and deformation parameters from cone penetration tests. Proc. of 2nd European Symposium on Penetration Testing ESOPT-II, Amsterdam, Balkema Pub. Rotterdam, 863–870. SennesetK. JanbuN. SvanoG. 1982 Strength and deformation parameters from cone penetration tests Proc. of 2nd European Symposium on Penetration Testing ESOPT-II Amsterdam Balkema Pub. Rotterdam 863 870 Search in Google Scholar

[73] Stefaniak K. (2014). Wybrane osady aluwialne jako podłoże budowlane i materiał do budowli ziemnych. PhD thesis (in Polish). University of Life Science, Poznań, Poland. StefaniakK. 2014 Wybrane osady aluwialne jako podłoże budowlane i materiał do budowli ziemnych PhD thesis (in Polish). University of Life Science Poznań, Poland Search in Google Scholar

[74] Tanaka H., Nishida K. (2007). Suction and shear wave velocity measurements for assessing sample quality. Studia Geotechnica et Mechanica, No 1–2, 163–175. TanakaH. NishidaK. 2007 Suction and shear wave velocity measurements for assessing sample quality Studia Geotechnica et Mechanica 1–2 163 175 Search in Google Scholar

[75] Topolnicki M., Kłosiński B., (2023) Wytyczne wzmacniania podłoża gruntowego kolumnami sztywnymi. Wydawnictwo Naukowe PWN SA (in Polish). TopolnickiM. KłosińskiB. 2023 Wytyczne wzmacniania podłoża gruntowego kolumnami sztywnymi Wydawnictwo Naukowe PWN SA (in Polish). Search in Google Scholar

[76] Wierzbicki J. (2010). Ocena prekonsolidacji podłoża metodami in-situ w aspekcie jego genezy. Rozprawy naukowe z. 410, Wydawnictwo Uniwersytetu Przyrodniczego w Poznaniu (in Polish). WierzbickiJ. 2010 Ocena prekonsolidacji podłoża metodami in-situ w aspekcie jego genezy Rozprawy naukowe z. 410, Wydawnictwo Uniwersytetu Przyrodniczego w Poznaniu (in Polish). Search in Google Scholar

[77] Winter B.J., Brown D.R., Michels K.M. (1991). Statistics Principal in Experimental Design. McGraw-Hill, New York. WinterB.J. BrownD.R. MichelsK.M. 1991 Statistics Principal in Experimental Design McGraw-Hill New York Search in Google Scholar

[78] You S. (2004). In-situ soil testing from mechanics to interpretation, J.K. Mitchell Lecture. Proc. of Int. Conference Geotechnical and Geophysical Site Characterization, ISC-2, Porto, Viana da Fonseca, Mayne (eds.), Millpress, 3–38. YouS. 2004 In-situ soil testing from mechanics to interpretation, J.K. Mitchell Lecture Proc. of Int. Conference Geotechnical and Geophysical Site Characterization, ISC-2 Porto Viana da FonsecaMayne (eds.), Millpress 3 38 Search in Google Scholar

[79] Zięba Z. (2013). Wpływ cech kształtu cząstek drobnoziarnistych gruntów niespoistych na ich wodoprzepuszczalność. Uniwersytet Przyrodniczy we Wrocławiu, PhD thesis (in Polish). ZiębaZ. 2013 Wpływ cech kształtu cząstek drobnoziarnistych gruntów niespoistych na ich wodoprzepuszczalność Uniwersytet Przyrodniczy we Wrocławiu PhD thesis (in Polish). Search in Google Scholar