This work is licensed under the Creative Commons Attribution 4.0 International License.
Basu P., Prezzi M. (2009): Design and Applications of Drilled Displacement (Screw) Piles. Publication FHWA/IN/JTRP-2009/28. West Lafayette: Joint Transportation Research Program, Indiana Department of Transportation and Purdue University, http://docs.lib.purdue.edu/cgi/viewcontent.cgi.BasuP.PrezziM.2009Design and Applications of Drilled Displacement (Screw) Pileshttp://docs.lib.purdue.edu/cgi/viewcontent.cgi.Search in Google Scholar
Bottiau M. (2006): Recent evolutions in deep foundation technologies. Proceedings of the DFI/EFFC 10th Int. Conf. On Piling and Deep Foundations, Amsterdam.BottiauM.2006Proceedings of the DFI/EFFC 10th Int. Conf. On Piling and Deep FoundationsAmsterdamSearch in Google Scholar
Bustamante, M. and Gianeselli, L. (1998). Installation parameters and capacity of screwed piles. Proc. of Deep foundations on bored and auger piles, BAP III, Balkema, Rotterdam.BustamanteM.GianeselliL.1998Proc. of Deep foundations on bored and auger piles, BAP III, BalkemaRotterdamSearch in Google Scholar
Gwizdała K. (2010): Fundamenty palowe. Tom 1: Technologie i obliczenia (Pile foundations. Tom 1: Technologies and calculations). Warszawa: PWN, 297.GwizdałaK.2010WarszawaPWN297Search in Google Scholar
Holeyman A.E. (2001): Screw piles – installation and design in stiff clay. Proc. of the Symp. on Screw Piles, Brussels, Belgium, Swets and Zeitlinger B.V., Lisse, 323.HoleymanA.E.2001Proc. of the Symp. on Screw Piles, Brussels, Belgium, Swets and Zeitlinger B.V.Lisse323Search in Google Scholar
Holeyman, A. and Skov, R. (2003). Implementation of dynamic testing, Driving formulae, Monitoring and Quality design in pile design, Geotechnical problems with man-made and man influenced grounds. Proc. of the 13th European Conference on Soil Mechanics and Geotechnical Engineering, 25–28 August, Praha, Czech Republic, Vol. 3, 702–714.HoleymanA.SkovR.2003Proc. of the 13th European Conference on Soil Mechanics and Geotechnical Engineering25–28 AugustPraha, Czech Republic3702714Search in Google Scholar
Kobrzyńska K., Kanty P., Jakubowski K. (2018). Analiza kalibracji wyników sondowań CPT z próbnymi odwiertami kolumn przemieszczeniowych CMC (Calibration analysis of CPT results with test drillings of CMC displacement columns). Przegląd Naukowy, Inżynieria i Kształtowanie Środowiska, 27(2). DOI: 10.22630/PNIKS.2018.27.2.17KobrzyńskaK.KantyP.JakubowskiK.2018Analiza kalibracji wyników sondowań CPT z próbnymi odwiertami kolumn przemieszczeniowych CMC (Calibration analysis of CPT results with test drillings of CMC displacement columns)27210.22630/PNIKS.2018.27.2.17Open DOISearch in Google Scholar
Konkol J. (2023), Incorporating installation effects into the probability analysis of controlled modulus columns. Soils and Foundations 63 (1), 101266, https://doi.org/10.1016/j.sandf.2022.101266KonkolJ.2023Incorporating installation effects into the probability analysis of controlled modulus columns631101266https://doi.org/10.1016/j.sandf.2022.101266Search in Google Scholar
Krasiński A. (2013). Pale przemieszczeniowe wkręcane. Współpraca z niespoistym podłożem gruntowym (Screw displacement piles. Bearing capacity and work in non-cohesive soils). (Habilitation thesis), Monografie Nr 134, Wydawnictwo Politechniki Gdańskiej, Gdańsk, 250 s.KrasińskiA.2013Monografie Nr 134, Wydawnictwo Politechniki Gdańskiej, Gdańsk, 250 s.Search in Google Scholar
Krasiński A. (2014). The analysis of soil resistance during screw displacement pile installation. Studia Geotechnica et Mechanica, Vol. XXXVI, No. 3, 49–56, DOI: 10.2478/sgem-2014-0026.KrasińskiA.2014The analysis of soil resistance during screw displacement pile installationXXXVI3495610.2478/sgem-2014-0026Open DOISearch in Google Scholar
Krasiński A., Więcławski P., Kusio T., Wiszniewski M., Tisler W. (2022a). Raport końcowy z projektu badawczego „DPDT-Auger”, nr POIR.04.01.04-00-0124/18 „Opracowanie metody i narzędzi do wykonywania kolumn/pali przemieszczeniowych wkręcanych w różnorodnych warunkach gruntowych na obszarze Polski wraz z przygotowaniem metodyki do projektowania i odbioru robót”. (Final report from research project „DPDT-Auger”, nr POIR.04.01.04-00-0124/18 „Development of a method and tools for the installation of screw displacement columns/piles in various ground conditions in Poland, together with the preparation of a methodology for the design and acceptance of works”) (Unpublished data). Opracowanie tekstowe. Gdansk University of Technology. Gdansk, Poland.KrasińskiA.WięcławskiP.KusioT.WiszniewskiM.TislerW.2022a(Unpublished data).Opracowanie tekstowe. Gdansk University of TechnologyGdansk, PolandSearch in Google Scholar
Krasiński A., Więcławski P., Wiszniewski M., Kusio T. (2022b). Model tests of cast-in-place piles formed by using different types of auger. Proc. of the 20th Int. Conf. on Soil Mechanics and Geotechnical Engineering, Australian Geomechanics Society, Sydney, 1227–1232.KrasińskiA.WięcławskiP.WiszniewskiM.KusioT.2022bProc. of the 20th Int. Conf. on Soil Mechanics and Geotechnical Engineering, Australian Geomechanics SocietySydney12271232Search in Google Scholar
Krasiński A., Więcławski P., Kusio T., Wiszniewski M., Tisler W. (2023). Results of the „DPDT-Auger” research project on screw displacement piles. (Forthcoming), Architecture, Civil Engineering, Environment (ACEE).KrasińskiA.WięcławskiP.KusioT.WiszniewskiM.TislerW.2023Results of the „DPDT-Auger” research project on screw displacement piles. (Forthcoming)Search in Google Scholar
Maertens J., Huybrechts N. (2003): Belgian screw pile technology. Design and recent developments. Proc. of the Second Symp. on Screw Piles, Brussels: 2003. Swets and Zeitlinger B.V., Lisse, 349.MaertensJ.HuybrechtsN.2003Proc. of the Second Symp. on Screw PilesBrussels2003Swets and Zeitlinger B.V.Lisse349Search in Google Scholar
Nesmith W.M. (2003). Installation effort as an indicator of displacement screw pile capacity. Deep Foundation on Bored and Auger Piles, BAP IV, Van Impe (ed.), Millpress, Rotterdam, 177–181.NesmithW.M.2003Installation effort as an indicator of displacement screw pile capacityVan Impe(ed.),MillpressRotterdam177181Search in Google Scholar
Nesmith Jr. W.M., Nesmith W.M. (2008). Installation effort: current calculation methods and uses in design and construction in the US. Deep Foundation on Bored and Auger Piles, BAP V, Ghent, Belgium.NesmithW.M.Jr.NesmithW.M.2008Installation effort: current calculation methods and uses in design and construction in the USGhent, BelgiumSearch in Google Scholar
Pucker T., Grabe J. (2012). Numerical simulation of the installation process of full displacement piles. Computers and Geotechnics, 45, 93–106, http://dx.doi.org/10.1016/j.compgeo.2012.05.006PuckerT.GrabeJ.2012Numerical simulation of the installation process of full displacement piles4593106http://dx.doi.org/10.1016/j.compgeo.2012.05.006Search in Google Scholar
Robertson, P.K. (1990). Soil classification using the cone penetration test. Canadian Geotechnical Journal, 27(1): 151–158.RobertsonP.K.1990Soil classification using the cone penetration test271151158Search in Google Scholar
Sakr, M. (2014): Relationship between installation torque and axial capacities of helical piles in cohesionless soils. Canadian Geotechnical Journal, 52(6), 747–759, https://doi.org/10.1139/cgj-2013-0395.SakrM.2014Relationship between installation torque and axial capacities of helical piles in cohesionless soils526747759https://doi.org/10.1139/cgj-2013-0395.Search in Google Scholar
Saleem, M.A., Malik, A.A. and Kuwano, J. (2020). End shape and rotation effect on steel pipe pile installation effort and bearing resistance. Geomechanics and Engineering, 23(6), 523–533. https://doi.org/10.12989/gae.2020.23.6.523.SaleemM.A.MalikA.A.KuwanoJ.2020End shape and rotation effect on steel pipe pile installation effort and bearing resistance236523533https://doi.org/10.12989/gae.2020.23.6.523.Search in Google Scholar
Trojnar K., Siry A. (2019). Assessment of the resistance of displacement piles based on measurement of selected drilling parameters. Proc. of the 3rd Int. Conf. CGE, Zielona Góra.TrojnarK.SiryA.2019Proc. of the 3rd Int. Conf. CGEZielona GóraSearch in Google Scholar
Tsuha, C.H.C., Aoki, N. (2010): Relationship between installation torque and uplift capacity of deep helical piles in sand. Canadian Geotechnical Journal, 47(6), 635–647, https://doi.org/10.1139/T09-128.TsuhaC.H.C.AokiN.2010Relationship between installation torque and uplift capacity of deep helical piles in sand476635647https://doi.org/10.1139/T09-128.Search in Google Scholar
VAN IMPE, W.F. (2001). Considerations on the influence of screw pile installation parameters on the overall pile behaviour. Screw piles – installation and design in stiff clay. Holeyman ed., Swets&Zeitlinger, Lisse, 127–149.VAN IMPEW.F.2001Holeymaned.Swets&ZeitlingerLisse127149Search in Google Scholar
Opis patentowy Nr PL 235442 B1 (2020): Świder do wykonywania pali przemieszczeniowych wkręcanych. (Patent description No. PL 235442 B1: Drill for screw displacement piles execusion). Patent Office of the Republic of Poland, 10.08.2020, Warsaw, Poland.Opis patentowy Nr PL 235442 B12020Patent Office of the Republic of Poland, 10.08.2020Warsaw, PolandSearch in Google Scholar
PN-EN:1997-1:2008 - Eurocode 7: Geotechnical design – Part 1: General rules. European/Polish Committee for Standardization, Brussels/Warsaw.PN-EN:1997-12008European/Polish Committee for StandardizationBrussels/WarsawSearch in Google Scholar