Logowanie
Zarejestruj się
Zresetuj hasło
Publikuj i Dystrybuuj
Rozwiązania Wydawnicze
Rozwiązania Dystrybucyjne
Dziedziny
Architektura i projektowanie
Bibliotekoznawstwo i bibliologia
Biznes i ekonomia
Chemia
Chemia przemysłowa
Filozofia
Fizyka
Historia
Informatyka
Inżynieria
Inżynieria materiałowa
Językoznawstwo i semiotyka
Kulturoznawstwo
Literatura
Matematyka
Medycyna
Muzyka
Nauki farmaceutyczne
Nauki klasyczne i starożytne studia bliskowschodnie
Nauki o Ziemi
Nauki o organizmach żywych
Nauki społeczne
Prawo
Sport i rekreacja
Studia judaistyczne
Sztuka
Teologia i religia
Zagadnienia ogólne
Publikacje
Czasopisma
Książki
Materiały konferencyjne
Wydawcy
Blog
Kontakt
Wyszukiwanie
EUR
USD
GBP
Polski
English
Deutsch
Polski
Español
Français
Italiano
Koszyk
Home
Czasopisma
Studia Geotechnica et Mechanica
Tom 45 (2023): Zeszyt 2 (June 2023)
Otwarty dostęp
Safety of Steel Arch Support Operation During Rock Bursts Under Explosive Atmosphere Conditions
Andrzej Pytlik
Andrzej Pytlik
oraz
Witold Frąc
Witold Frąc
| 17 mar 2023
Studia Geotechnica et Mechanica
Tom 45 (2023): Zeszyt 2 (June 2023)
O artykule
Poprzedni artykuł
Następny artykuł
Abstrakt
Artykuł
Ilustracje i tabele
Referencje
Autorzy
Artykuły w tym zeszycie
Podgląd
PDF
Zacytuj
Udostępnij
Article Category:
Research Article
Data publikacji:
17 mar 2023
Zakres stron:
144 - 157
Otrzymano:
24 wrz 2021
Przyjęty:
05 sty 2023
DOI:
https://doi.org/10.2478/sgem-2023-0004
Słowa kluczowe
arching support sliding joints
,
straight prop sliding joints
,
dynamic load capacity
,
kinetic coefficient of friction
,
thermal imaging
© 2023 Andrzej Pytlik et al., published by Sciendo
This work is licensed under the Creative Commons Attribution 4.0 International License.
Figure 1
Setup for testing straight and arching sliding joints (a) and picture of the test facility with an SV prop constructed from V32 sections (b).
Figure 2
Inspecting the emissivity e of the steel used to construct the V32 sections: (a) picture of the dryer with the sections; (b) thermal image.
Figure 3
Courses of sliding joint static load capacity Fs: (a) SV32 – two SDO32W shackles, Md = 450 N m; (b) SV32t – three SDO32W shackles, Md = 500 N m.
Figure 4
Pictures of sliding joints in an SV32t prop (three shackles in the joint).
Figure 5
Course of joint force and maximum temperature at an impact velocity vp = 2.05 m/s (a) and joint thermal image (b).
Figure 6
Course of joint force and maximum temperature at an impact velocity vp = 2.45 m/s (a) and joint thermal image (b).
Figure 7
Course of joint force and maximum temperature at an impact velocity vp = 2.79 m/s (a) and joint thermal image (b).
Figure 8
Arching sliding joint (a, c), course of joint force and maximum temperature at an impact velocity vp = 0.55 m/s (b), and joint thermal image (d).
Figure 9
Course of joint force and maximum temperature at an impact velocity vp = 2.05 m/s (a), picture of an arching joint (b), and joint thermal image (c).
Figure 10
SV32tw friction prop with four shackles: three shackles in the joint and one restraining shackle under the joint.
Figure 11
Course of joint force and maximum temperature at an impact velocity vp = 2.05 m/s (a) and joint thermal image (b). 3 – lower shackle; 4 – restraining shackle.
Result compilation of SV32t straight sliding joint tests under dynamic loading.
Test no.
v
p
, m/s
z
, m
E
c
, J
N
d
, kN
T
max
, °C
1
2.05
140
25,556
183
169.6
2
110
23,387
213
3
95
33,256
235
4
2.45
155
33,256
215
175.5
5
160
33,617
210
6
150
45,293
219
7
2.79
230
45,293
197
234.1
8
205
43,485
212
9
205
43,485
212
Average
211
Standard deviation
14