<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The algorithm presented in this paper is intended for the analysis of deformations of shells in the construction phase of soil-shell objects when strain gauges and geodetic measurements are used. During the construction of such an object, large displacement values occur and the impact of axial forces on the displacement of a corrugated metal sheet is small. Internal forces (strain gauges), as well as the displacements of a selected circumferential band of the shell are determined directly from such observations.</p><p>The paper presents two examples of the analysis of large span shell structures of constructed objects, as well as the assessment of the effectiveness of the finite difference method (FDM) in beam schemes. Good deformation mapping was indicated using the collocation algorithm and the differential approach to the solution when there is a dense mesh and regular distribution of measuring points. In the analysed examples, a significant divergence between the support conditions adopted in the FEM calculation models and the actual static conditions in the objects was indicated. The collocation algorithm is especially designed for such situations. Collocation points in such a solution are used to consider a beam – separated from a structure and without boundary constraints, but with specific changes in curvature – as a reference system, which is determined from the geodetic measurements of two collocation points.</p></abstract>

The algorithm presented in this paper is intended for the analysis of deformations of shells in the construction phase of soil-shell objects when strain gauges and geodetic measurements are used. During the construction of such an object, large displacement values occur and the impact of axial forces on the displacement of a corrugated metal sheet is small. Internal forces (strain gauges), as well as the displacements of a selected circumferential band of the shell are determined directly from such observations.The paper presents two examples of the analysis of large span shell structures of constructed objects, as well as the assessment of the effectiveness of the finite difference method (FDM) in beam schemes. Good deformation mapping was indicated using the collocation algorithm and the differential approach to the solution when there is a dense mesh and regular distribution of measuring points. In the analysed examples, a significant divergence between the support conditions adopted in the FEM calculation models and the actual static conditions in the objects was indicated. The collocation algorithm is especially designed for such situations. Collocation points in such a solution are used to consider a beam – separated from a structure and without boundary constraints, but with specific changes in curvature – as a reference system, which is determined from the geodetic measurements of two collocation points.

The Use of the Collocation Algorithm for Estimating the Deformations of Soil-Shell Objects Made of Corrugated Sheets

Department of Bridges and Railways, Faculty of Civil Engineering

Wroclaw University of Science and Technology

Studia Geotechnica et Mechanica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The algorithm presented in this paper is intended for the analysis of deformations of shells in the construction phase of soil-shell objects when strain gauges...

The Use of the Collocation Algorithm for Estimating the Deformations of Soil-Shell Objects Made of Corrugated Sheets

Article Category: Research Article

Data publikacji: 26 cze 2020

Zakres stron: 319 - 329

Otrzymano: 03 lut 2020

Przyjęty: 04 maj 2020

DOI: https://doi.org/10.2478/sgem-2019-0048

Słowa kluczowe
Monitoring, soil-steel objects, corrugated sheets, collocation

© 2020 Czesław Machelski, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The Use of the Collocation Algorithm for Estimating the Deformations of Soil-Shell Objects Made of Corrugated Sheets

Article Category: Research Article

Data publikacji: 26 cze 2020

Zakres stron: 319 - 329

Otrzymano: 03 lut 2020

Przyjęty: 04 maj 2020

DOI: https://doi.org/10.2478/sgem-2019-0048

Słowa kluczoweMonitoring, soil-steel objects, corrugated sheets, collocation

© 2020 Czesław Machelski, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Słowa kluczowe
Monitoring, soil-steel objects, corrugated sheets, collocation