Logowanie
Zarejestruj się
Zresetuj hasło
Publikuj i Dystrybuuj
Rozwiązania Wydawnicze
Rozwiązania Dystrybucyjne
Dziedziny
Architektura i projektowanie
Bibliotekoznawstwo i bibliologia
Biznes i ekonomia
Chemia
Chemia przemysłowa
Filozofia
Fizyka
Historia
Informatyka
Inżynieria
Inżynieria materiałowa
Językoznawstwo i semiotyka
Kulturoznawstwo
Literatura
Matematyka
Medycyna
Muzyka
Nauki farmaceutyczne
Nauki klasyczne i starożytne studia bliskowschodnie
Nauki o Ziemi
Nauki o organizmach żywych
Nauki społeczne
Prawo
Sport i rekreacja
Studia judaistyczne
Sztuka
Teologia i religia
Zagadnienia ogólne
Publikacje
Czasopisma
Książki
Materiały konferencyjne
Wydawcy
Blog
Kontakt
Wyszukiwanie
EUR
USD
GBP
Polski
English
Deutsch
Polski
Español
Français
Italiano
Koszyk
Home
Czasopisma
Studia Geotechnica et Mechanica
Tom 40 (2018): Zeszyt 1 (July 2018)
Otwarty dostęp
Numerical 3D simulations of seepage and the seepage stability of the right-bank dam of the Dry Flood Control Reservoir in Racibórz
Tomasz Strzelecki
Tomasz Strzelecki
,
Anna Uciechowska-Grakowicz
Anna Uciechowska-Grakowicz
,
Michał Strzelecki
Michał Strzelecki
,
Eugeniusz Sawicki
Eugeniusz Sawicki
oraz
Łukasz Maniecki
Łukasz Maniecki
| 05 cze 2018
Studia Geotechnica et Mechanica
Tom 40 (2018): Zeszyt 1 (July 2018)
O artykule
Poprzedni artykuł
Następny artykuł
Abstrakt
Artykuł
Ilustracje i tabele
Referencje
Autorzy
Artykuły w tym zeszycie
Podgląd
PDF
Zacytuj
Udostępnij
Article Category:
Research Article
Data publikacji:
05 cze 2018
Zakres stron:
11 - 20
Otrzymano:
18 paź 2017
Przyjęty:
12 sty 2018
DOI:
https://doi.org/10.2478/sgem-2018-0003
Słowa kluczowe
Seepage
,
3D simulation
,
anisotropy
,
gravel columns
© 2018 Tomasz Strzelecki et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.
Figure 1
Localization of the reservoir on the hydrographic map of Poland (Aoteroa, 2006).
Figure 2
View of the triangle mesh of the terrain model of the reservoir’s area, with locations of numerical models
Figure 3
Fragment of the dam built of material from local mines, km 1+900.
Figure 4
One of gravel mines within the reservoir’s basin, view from the right-bank dam, km 2+400.
Figure 5
3D view of the REV element along with the generated finite element mesh
Figure 6
Generated 3D finite element mesh for Dam 1.
Figure 7
Isolines of hydraulic head relative to the roof of the gravel layer after: a) 1 day, b) 2.5 days, c) 15 days, d) 1 year.
Figure 8
Isolines of hydraulic head in a selected cross-section relative to the elevation of 170 m above sea level after: b) 1 day, b) 2.5 days, d) 15 days, e) 1 year
Figure 9
Vector field of seepage speed in the roof of the gravel layer underneath the clay layer after: a) during the period between floods (1 year after flood), b) 15th day of filling. Water table height in gravel layer is shown in the background.
Figure 10
Area of change of potential Ψ to a negative sign on the 15th day of reservoir filling.
Figure 11
Model geometry (10× exaggeration): 1. clay, 2. gravel, 3. gravel columns in clay, 4. drain, 5. Diaphragm wall
Figure 12
Seepage rate vectors on the 15th day of a flood, in the gravel layer for the case of the shorter diaphragm wall (left) and longer diaphragm wall (right).
Figure 13
Comparison of water table height (in the case of no drainage) for both variants of diaphragm wall length. Longer diaphragm wall on the left, shorter on the right6.3
Figure 14
A) Generated 3D finite element mesh B) Cross-section through dam 3: 1. clay, 2. gravel, 3. gravel columns in clay, 4. drain
Figure 15
Isolines of hydraulic head and flow vectors in the gravel layer at 170 m above sea level after: a) 1 day, b) 15 days.