<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The purpose of the study was to evaluate the possibility of removing heavy metal cations from single-metal spiked soil samples, which were pretreated with nanoscale zero-valent iron (nZVI) particles. Sandy soil was artificially contaminated with copper (Cu), cadmium (Cd), nickel (Ni), and lead (Pb). Contaminated soil samples were amended with different doses of nZVI (0.35, 0.70 and 1.05 %). A sequential extraction method was used to determine the fractionation of heavy metal cations in the control and nZVI amended soil samples. A solution of 0.1 M acetic acid (pH 3.0) was used to investigate the removal of heavy metals from control and nZVI-amended soil samples. The results showed that nZVI reduced the amount of metals in the exchangeable form and increased the proportion of these metals associated with amorphous iron (Fe) oxides. The results also showed that the removal efficiencies of heavy metals increased with increasing nZVI dose, that is, from 46.9 %, 5.77 %, 33.5 %, and 2.70 % to 55.9 %, 12.3 %, 46.2 %, and 3.79 % for Cd, Cu, Ni, and Pb, respectively. The study indicated that the application of nZVI in soil could be beneficial for subsequent removal of heavy metals from soil using 0.1 M acetic acid solution.</p>
</abstract>

The purpose of the study was to evaluate the possibility of removing heavy metal cations from single-metal spiked soil samples, which were pretreated with nanoscale zero-valent iron (nZVI) particles. Sandy soil was artificially contaminated with copper (Cu), cadmium (Cd), nickel (Ni), and lead (Pb). Contaminated soil samples were amended with different doses of nZVI (0.35, 0.70 and 1.05 %). A sequential extraction method was used to determine the fractionation of heavy metal cations in the control and nZVI amended soil samples. A solution of 0.1 M acetic acid (pH 3.0) was used to investigate the removal of heavy metals from control and nZVI-amended soil samples. The results showed that nZVI reduced the amount of metals in the exchangeable form and increased the proportion of these metals associated with amorphous iron (Fe) oxides. The results also showed that the removal efficiencies of heavy metals increased with increasing nZVI dose, that is, from 46.9 %, 5.77 %, 33.5 %, and 2.70 % to 55.9 %, 12.3 %, 46.2 %, and 3.79 % for Cd, Cu, Ni, and Pb, respectively. The study indicated that the application of nZVI in soil could be beneficial for subsequent removal of heavy metals from soil using 0.1 M acetic acid solution.

Removal of Cd, Cu, Ni, and Pb from Nanoscale Zero-Valent Iron Amended Soil Using 0.1 M Acetic Acid Solution

Environmental and Climate Technologies

This work is licensed under the Creative Commons Attribution 4.0 International License.

The purpose of the study was to evaluate the possibility of removing heavy metal cations from single-metal spiked soil samples, which were pretreated with...

Removal of Cd, Cu, Ni, and Pb from Nanoscale Zero-Valent Iron Amended Soil Using 0.1 M Acetic Acid Solution

Data publikacji: 21 cze 2022

Zakres stron: 406 - 414

DOI: https://doi.org/10.2478/rtuect-2022-0031

Słowa kluczowe
Heavy metal removal, immobilisation, iron nanoparticles, soil washing

© 2022 Vaidotas Danila et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Removal of Cd, Cu, Ni, and Pb from Nanoscale Zero-Valent Iron Amended Soil Using 0.1 M Acetic Acid Solution

Data publikacji: 21 cze 2022

Zakres stron: 406 - 414

DOI: https://doi.org/10.2478/rtuect-2022-0031

Słowa kluczoweHeavy metal removal, immobilisation, iron nanoparticles, soil washing

© 2022 Vaidotas Danila et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Słowa kluczowe
Heavy metal removal, immobilisation, iron nanoparticles, soil washing