[1. R. Orndorff :Water lubricated rubber bearings, history and new developments, Nav Eng J, 1985, pp. 39–52,.10.1111/j.1559-3584.1985.tb01877.x]Search in Google Scholar
[2. H. Hirani and M. Verma: Tribological study of elastomeric bearings for marine propeller shaft system, Tribol. Int., vol. 42, 2009, No. 2, pp. 378–390.10.1016/j.triboint.2008.07.014]Search in Google Scholar
[3. W. Litwin and C. Dymarski: Experimental research on water-lubricated marine stern tube bearings in conditions of improper lubrication and cooling causing rapid bush wear, Tribol. Int., vol. 95, 2016, pp. 449–455,.10.1016/j.triboint.2015.12.005]Search in Google Scholar
[4. W. Litwin : Properties comparison of rubber and three layer PTFE-NBR-bronze water lubricated bearings with lubricating grooves along entire bush circumference based on experimental tests, Tribol. Int., vol. 90, 2015, pp. 404–411.10.1016/j.triboint.2015.03.039]Search in Google Scholar
[5. B. J. Blair: Getting the most from your bearings. World Pumps, vol. 2016,No. 7–8, pp. 36–40,.10.1016/S0262-1762(16)30169-9]Search in Google Scholar
[6. M. Wodtke and M. Wasilczuk: Evaluation of apparent Young’s modulus of the composite polymer layers used as sliding surfaces in hydrodynamic thrust bearings, Tribol. Int., vol. 97, 2016, pp. 244–252.10.1016/j.triboint.2016.01.040]Search in Google Scholar
[7. W. Litwin, A. Olszewski, and M. Wodtke: Influence of Shaft Misalignment on Water Lubricated Turbine Sliding Bearings with Various Bush Modules of Elasticity. Key Eng. Mater., vol. 490, 2011, pp. 128–134,10.4028/www.scientific.net/KEM.490.128]Search in Google Scholar
[8. W. Litwin: Water lubricated marine stern tube bearings – Attempt at estimating hydrodynamic capacity,” in Proceedings of the ASME/STLE International Joint Tribology Conference 2009, IJTC2009, 2010.10.1115/IJTC2009-15068]Search in Google Scholar
[9. W. Litwin: Influence of local bush wear on water lubricated sliding bearing load carrying capacity. Tribol. Int., vol. 103, 2016.10.1016/j.triboint.2016.06.044]Search in Google Scholar
[10. Q. Hongling, Z. Xincong, X. Chuntao, W. Hao, and L. Zhenglin: Tribological Performance of a Polymer Blend of NBR Used for Stern Bearings, 2012, pp. 133–139,.10.2174/1874155X01206010133]Search in Google Scholar
[11. Y. Wang, X. Shi, and L. Zhang,: Experimental and numerical study on water-lubricated rubber bearings, Ind. Lubr. Tribol. Exp., vol. 2, 2014, no. 51175275, pp. 282–288,.10.1108/ILT-11-2011-0098]Search in Google Scholar
[12. M. Del Din and E. Kassfeldt: Wear characteristics with mixed lubrication conditions in a full scale journal bearing, Wear, vol. 232, 1999, no. 2, pp. 192–198,10.1016/S0043-1648(99)00145-3]Search in Google Scholar
[13. D. L. Cabrera, N. H. Woolley, D. R. Allanson, and Y. D Tridimas: Film pressure distribution in water-lubricated rubber journal bearings, Proc. Inst. Mech. Eng. Part J J. Eng. Tribol., vol. 219, 2005, no. 2, pp. 125–132,10.1243/135065005X9754]Search in Google Scholar
[14. Y. Zhimin et al.: Study on tribological and vibration performance of a new UHMWPE/graphite/NBR water lubricated bearing material, Wear, vol. 332–333, 2015, pp. 872–878.10.1016/j.wear.2014.12.054]Search in Google Scholar
[15. R. Colsher, I. Anwar, J. Dunfee, and M. Kandl: Development of Water Lubricated Bearing for Steam Turbine Application, J. Lubr. Technol., vol. 105, 1983, no. 3, p. 318.10.1115/1.3254600]Search in Google Scholar
[16. G. Gao, Z. Yin, D. Jiang, and X. Zhang: Numerical analysis of plain journal bearing under hydrodynamic lubrication by water, Tribol. Int., vol. 75, 2014, pp. 31–38.10.1016/j.triboint.2014.03.009]Search in Google Scholar
[17. A.-F. Cristea, J. Bouyer, M. Fillon, and M. D. Pascovici; Transient Pressure and Temperature Field Measurements of a Lightly Loaded Circumferential Groove Journal Bearing, Tribol. Trans., vol. 54, 2011, no. 5, pp. 806–823.10.1080/10402004.2011.604758]Search in Google Scholar
[18. R. Gawarkiewicz and M. Wasilczuk: Wear measurements of self-lubricating bearing materials in small oscillatory movement, Wear, vol. 263, 2007, no. 1–6 SPEC. ISS., pp. 458–462.10.1016/j.wear.2006.12.060]Search in Google Scholar
[19. A. Olszewski, M. Wodtke, and P. Hryniewicz: Experimental Investigation of Prototype Water-Lubricated Compliant Foil Bearings, Key Eng. Mater., vol. 490, 2011, pp. 97–105.10.4028/www.scientific.net/KEM.490.97]Search in Google Scholar
[20. M. Wodtke, A. Schubert, M. Fillon, M. Wasilczuk, and P. Pajaczkowski: Large hydrodynamic thrust bearing: Comparison of the calculations and measurements, Proc. Inst. Mech. Eng. Part J J. Eng. Tribol., vol. 228, 2014, no. 9, pp. 974–983.10.1177/1350650114528317]Search in Google Scholar
[21. M. Mehdizadeh and F. Khodabakhshi: An investigation into failure analysis of interfering part of a steam turbine journal bearing, Case Stud. Eng. Fail. Anal., vol. 2, 2014, no. 2, pp. 61–68,.10.1016/j.csefa.2014.04.001]Search in Google Scholar
[22. W. Wieleba: The Mechanism of Tribological Wear of Thermoplastic Materials, Arch. Civ. Mech. Eng., Vol. VII, 2007, No. 4.10.1016/S1644-9665(12)60236-2]Search in Google Scholar
[23. J. Takabi and M. M. Khonsari: On the thermally-induced seizure in bearings: A review, Tribol. Int., vol. 91, 2015, pp. 118–130.10.1016/j.triboint.2015.05.030]Search in Google Scholar
[24. Q. Wang : Seizure failure of journal-bearing conformal contacts, Wear, vol. 210, 1997, no. 1–2, pp. 8–16.10.1016/S0043-1648(97)00064-1]Search in Google Scholar
[25. D. Garner, A. L.-P. of the 13th, and undefined 1984, Temperature measurements in fluid film bearings, oaktrust. library.tamu.edu.]Search in Google Scholar
[26. P. De Choudhury and E. W. Barth: A Comparison of Film Temperatures and Oil Discharge Temperature for a Tilting-Pad Journal Bearing, J. Tribol., vol. 103, 1981, no. 1, p. 115.10.1115/1.3251598]Search in Google Scholar
[27. S. Strzelecki, Z. S.- Tribologia, and undefined 2011, Operating temperatures of the bearing system of grinder spindle, t.tribologia.eu.]Search in Google Scholar
[28. D. G. Lee and S. S. Kim: Failure analysis of asbestos-phenolic composite journal bearing, Compos. Struct., vol. 65, 2004, no. 1, pp. 37–46.10.1016/j.compstruct.2003.10.004]Search in Google Scholar
[29. S. B. Glavatskih and M. Fillon: TEHD Analysis of Thrust Bearings With PTFE-Faced Pads, J. Tribol., vol. 128, 2006, no. 1, p. 49.10.1115/1.1843833]Search in Google Scholar
[30. O. Nosko, T. Nagamine, A. L. Nosko, A. M. Romashko, H. Mori, and Y. Sato: Measurement of temperature at sliding polymer surface by grindable thermocouples, Tribol. Int., vol. 88, 2015, pp. 100–106.10.1016/j.triboint.2015.03.015]Search in Google Scholar
[31. M. Hoić, M. Hrgetić, and J. Deur: Design of a pin-on-disc-type CNC tribometer including an automotive dry clutch application, Mechatronics, vol. 40, 2016, pp. 220–232.10.1016/j.mechatronics.2016.10.016]Search in Google Scholar
[32. E. Ciulli, P. Forte, M. Libraschi, and M. Nuti : Set-up of a novel test plant for high power turbomachinery tilting pad journal bearings, Tribol. Int., vol. 127, no. November 2017, pp. 276–287, 2018.10.1016/j.triboint.2018.06.014]Search in Google Scholar
[33. P. Śliwiński : The Influence of Water and Mineral Oil On Mechanical Losses in the Displacement Pump for Offshore and Marine Applications: Polish Marit. Res., vol. 25, 2018, no. s1, pp. 178–188.10.2478/pomr-2018-0040]Search in Google Scholar
[34. A. Dadouche, M. Fillon, and J. . Bligoud: Experiments on thermal effects in a hydrodynamic thrust bearing, Tribol. Int., vol. 33, 2000, no. 3–4, pp. 167–174.10.1016/S0301-679X(00)00023-2]Search in Google Scholar
[35. B. Remy, B. Bou-Saïd, and T. Lamquin : Fluid inertia and energy dissipation in turbocharger thrust bearings, Tribol. Int., vol. 95, 2016, pp. 139–146.10.1016/j.triboint.2015.11.014]Search in Google Scholar
[36. S. B. Glavatskih: A method of temperature monitoring in fluid film bearings, Tribol. Int., vol. 37, 2004, no. 2, pp. 143–148.10.1016/S0301-679X(03)00050-1]Search in Google Scholar
[37. T. W. Kerlin and M. Johnson: Practical Thermocouple Thermometry (2nd Edition). ISA, 2012.]Search in Google Scholar
[38. W. Dai, B. Kheireddin, H. Gao, and H. Liang : Roles of nanoparticles in oil lubrication, Tribol. Int., vol. 102, 2016, pp. 88–98.10.1016/j.triboint.2016.05.020]Search in Google Scholar
[39. J. Duchowski : Examination of journal bearing filtration requirements, Lubr. Eng., vol. 09, 1998, pp. 1–9.]Search in Google Scholar
[40. J. Duchowski, H. International, and J. Duchowski: Filtration requirements for journal bearings exposed to different contaminant levels, Lubr. Eng., vol. 06, 2002, no. July, pp. 34–39.]Search in Google Scholar
[41. D. Hargreaves and S. C. Sharma: Effects of solid contaminants on journal bearing performance, Proceedings of the 2nd World Tribology Congress, 3-7 September 2001. pp. 237–240.]Search in Google Scholar
[42. A. Dadouche and M. J. Conlon: Operational performance of textured journal bearings lubricated with a contaminated fluid, Tribol. Int., vol. 93, 2016, pp. 377–389.10.1016/j.triboint.2015.09.022]Search in Google Scholar
[43. M. M. Khonsari and E. R. Booser: Effect of contamination on the performance of hydrodynamic bearings, Proc. Inst. Mech. Eng. Part J J. Eng. Tribol., vol. 220, 2006, no. 5, pp. 419–428.10.1243/13506501J00705]Search in Google Scholar
[44. A. Akchurin, R. Bosman, P. M. Lugt, and M. van Drogen: Analysis of Wear Particles Formed in Boundary-Lubricated Sliding Contacts, Tribol. Lett., vol. 63, 2016, no. 2, pp. 1–14.10.1007/s11249-016-0701-z]Search in Google Scholar
[45. A. Akchurin, R. Bosman, and P. M. Lugt: Generation of wear particles and running-in in mixed lubricated sliding contacts, Tribol. Int., vol. 110, 2017, no. February, pp. 201–208.10.1016/j.triboint.2017.02.019]Search in Google Scholar
[46. A. Akchurin, R. Bosman, and P. M. Lugt: A Stress-Criterion-Based Model for the Prediction of the Size of Wear Particles in Boundary Lubricated Contacts, Tribol. Lett., vol. 64, 2016, no. 3, pp. 1–12.10.1007/s11249-016-0772-x]Search in Google Scholar
[47. G. Pintaude: Characteristics of Abrasive Particles and Their Implications on Wear, New Tribol. Ways, no. April 2011.10.5772/14618]Search in Google Scholar
[48. C. Q. Yuan, Z. Peng, X. C. Zhou, and X. P. Yan : The characterization of wear transitions in sliding wear process contaminated with silica and iron powder, Tribol. Int., vol. 38, 2005, no. 2, pp. 129–143.10.1016/j.triboint.2004.06.007]Search in Google Scholar
[49. L. Peña-Parás et al.: Effects of substrate surface roughness and nano/micro particle additive size on friction and wear in lubricated sliding, Tribol. Int., vol. 119, 2018, no. February 2017, pp. 88–98.10.1016/j.triboint.2017.09.009]Search in Google Scholar
[50. S. M. Park, G. H. Kim, and Y. Z. Lee: Investigation of the wear behaviour of polyacetal bushings by the inflow of contaminants, Wear, vol. 271, 2011, no. 9–10, pp. 2193–2197.10.1016/j.wear.2010.12.033]Search in Google Scholar
[51. E. Szymczak and D. Burska : Charakterystyka rozkładu wielkości cząstek in situ w strefie rozpływu wód Wisły (Zatoka Gdańska) (in Polish). ?? pp. 1–2, 2014.]Search in Google Scholar
[52. M. Damrat, A. Zaborska, and M. Zajaczkowski: Sedimentation from suspension and sediment accumulation rate in the River Vistula prodelta, Gulf of Gdańsk (Baltic Sea), Oceanologia, vol. 55, 2013, no. 4, pp. 937–950.10.5697/oc.55-4.937]Search in Google Scholar
[53. I. Geologiczny and I. Geologii ?? : Litologia i skład mineralny osadów z dna Basenu Gdańskiego (in Polish), ?? vol. 313, 1980, no. 2.]Search in Google Scholar
[54. T. Leipe and B. Sea : The kaolinite/chlorite clay mineral ratio in surface sediments of the southern Baltic Sea as an indicator for long distance transport of fine-grained material, Baltica, vol. 16, 2003, pp. 31–36.]Search in Google Scholar
[55. A. Ya and T. Yu : Revealing the influence of various factors on concentration and spatial distribution of suspended matter based on remote sensing data, Proc. SPIE, vol. 9638, 2015, pp. 1–12.]Search in Google Scholar
[56. Y. Solomonov: Experimental investigation of tribological characteristics of water-lubricated bearings materials on a pin-on-disk test rig, Yuriy Solomonov Master of Philosophy Thesis, The University of Adelaide School of Mechanical Engineering April 2014.]Search in Google Scholar
[57. C. L. Dong, C. Q. Yuan, X. Q. Bai, Y. Yang, and X. P. Yan: Study on wear behaviours for NBR/stainless steel under sand water-lubricated conditions, Wear, vol. 332–333, 2015, pp. 1012–1020.10.1016/j.wear.2015.01.009]Search in Google Scholar
[58. C. Yuan, Z. Guo, W. Tao, C. Dong, and X. Bai: Effects of different grain sized sands on wear behaviours of NBR/casting copper alloys, Wear, vol. 384–385, 2017, pp. 185–191.10.1016/j.wear.2017.02.019]Search in Google Scholar
[59. C. P. Gao et al.: Tribological behaviors of epoxy composites under water lubrication conditions, Tribol. Int., vol. 95, 2016, pp. 333–341.10.1016/j.triboint.2015.11.041]Search in Google Scholar
[60. S. Thörmann, M. Markiewicz, and O. von Estorff: On the stick-slip behaviour of water-lubricated rubber sealings, J. Sound Vib., vol. 399, 2017, pp. 151–168.10.1016/j.jsv.2017.03.021]Search in Google Scholar
[61. B. S. Mann and V. Arya : An experimental model for mixed friction during running-in, Wear, vol. 253, 2002, no. 5–6, pp. 541–549.10.1016/S0043-1648(02)00065-0]Search in Google Scholar
[62. L. Deleanu and C. Georgescu: Water lubrication of PTFE composites, Ind. Lubr. Tribol., vol. 67, 2015, no. 1, pp. 1–8.10.1108/ilt-11-2011-0095]Search in Google Scholar
[63. S. Chen et al.: Tribological properties of polyimide-modified UHMWPE for bushing materials of seawater lubricated sliding bearings, Tribol. Int., vol. 115, 2017, no. 126, pp. 470–476.10.1016/j.triboint.2017.06.011]Search in Google Scholar
[64. A. Ismailov, M. Järveläinen, and E. Levänen: Problematics of friction in a high-speed rubber-wheel wear test system: A case study of irregularly rough steel in water lubricated contact, Wear, vol. 408–409, 2018, no. December 2017, pp. 65–71.10.1016/j.wear.2018.05.002]Search in Google Scholar
[65. C. Dong, L. Shi, L. Li, X. Bai, C. Yuan, and Y. Tian : Stick-slip behaviours of water lubrication polymer materials under low speed conditions, Tribol. Int., vol. 106, 2017, no. October 2016, pp. 55–61.10.1016/j.triboint.2016.10.027]Search in Google Scholar
[66. S. Meicke and R. Paasch : Seawater lubricated polymer journal bearings for use in wave energy converters, Renew. Energy, vol. 39, 2012, no. 1, pp. 463–470.10.1016/j.renene.2011.08.041]Search in Google Scholar
[67. S. Jiang, Z. Guo, C. Yuan, A. Liu, and X. Bai : Study on the tribological properties of modified polyurethane material for water-lubricated stern bearing, J. Appl. Polym. Sci., vol. 135, 2018, no. 22, pp. 1–13.10.1002/app.46305]Search in Google Scholar
[68. J. Bouyer and M. Fillon : Experimental measurement of the friction torque on hydrodynamic plain journal bearings during start-up, Tribol. Int., vol. 44, 2011, no. 7–8, pp. 772–781.10.1016/j.triboint.2011.01.008]Search in Google Scholar
[69. Ł. Breńkacz and G. Żywica :The experimental identification of the dynamic coefficients for two hydrodynamic journal bearings, SIRM 2017, Schwingungen rotierenden Maschinen, vol. 24, 2017, no. 96, pp. 157–164.]Search in Google Scholar
[70. T. Dimond, R. D. Rockwell, P. N. Sheth, and P. E. Allaire: A New Fluid Film Bearing Test Rig for Oil and Water Bearings, Struct. Dyn. Parts A B, Vol. 5, 2008, pp. 1101–1110.10.1115/GT2008-50654]Search in Google Scholar
[71. N. Wang and Q. Meng : Research on wireless nondestructive monitoring method for film pressure of water-lubricated bearing, Ind. Lubr. Tribol., vol. 67, 2015, no. 4, pp. 349–358.10.1108/ILT-08-2014-0079]Search in Google Scholar
[72. N. Wang, Q. Meng, P. Wang, T. Geng, and X. Yuan: Experimental Research on Film Pressure Distribution of Water-Lubricated Rubber Bearing With Multiaxial Grooves, J. Fluids Eng., vol. 135, 2013, no. 8, p. 84501.10.1115/1.4024147]Search in Google Scholar
[73. S. Yamajo and F. Kikkawa: Development and Application of PTFE Compound Bearings, Dyn. Position. Conf., 2004.]Search in Google Scholar