[1. Leonhardt F: “Cracks and crack control in concrete structures”. PCI Journal, Vol. 33, No. 4, 1988, pp. 124-145.10.15554/pcij.07011988.124.145]Search in Google Scholar
[2. Makhlouf H M & Malhas F A: “The effect of thick concrete cover on the maximum flexural crack width under service load”. Structural Journal, Vol. 93, No. 3, 1996, pp. 257-265.10.14359/9685]Search in Google Scholar
[3. Beeby A: “Concrete in the oceans technical report no. 1”. Cement and Concrete Association, Slough, UK, No., 1978.]Search in Google Scholar
[4. JSCE: “Standard specifications for concrete structures-2007 ‘‘design’’”. JSCE Guidelines for Concrete”, 2007.]Search in Google Scholar
[5. CEB-FIP: “90. Design of concrete structures. Ceb-fip-model-code 1990”. British Standard Institution, London, 1993.]Search in Google Scholar
[6. fib: “Fib model code for concrete structures”, Structural Concrete, 2010.]Search in Google Scholar
[7. CEN: “EN 1992-1-1 Eurocode 2: Design of concrete structures - part 1–1: General rules and rules for buildings”, 2004.]Search in Google Scholar
[8. ACI: “Building code requirements for structural concrete:(ACI 318-95); and commentary (aci 318r-95)”, 1995.]Search in Google Scholar
[9. Model Code: “Ceb-fip model code for concrete structures”, Comité Euro-International du Béton, Paris, France; 1978.]Search in Google Scholar
[10. BS Institute: “EN 1991-1-1 eurocode 2: Design of concrete structures, general rules and rules for buildings.” UK, 1992.]Search in Google Scholar
[11. BS: “8110: Part 1, structural use of concrete–code of practice for design and construction”, 1985.]Search in Google Scholar
[12. Gergely P & Lutz L A: “Maximum crack width in reinforced concrete flexural members”. ACI Special Publication, Vol. 20, No., 1968, pp. 87-117.]Search in Google Scholar
[13. Kaar P H & Hognestad E: “High strength bars as concrete reinforcement, part 7: Control of cracking in t-beam flanges”: Portland Cement Association, Research and Development Laboratories; 1965.]Search in Google Scholar
[14. Sygula S: “Vergleichende untersuchungen über biegerißformeln für stahlbeton”. Beton-und Stahlbetonbau, Vol. 76, No. 5, 1981, pp. 114-117.10.1002/best.198100190]Search in Google Scholar
[15. AIJ: “Aij: Standard for structural calculation of rc structures”, Tokyo, 1986.]Search in Google Scholar
[16. Balazs G L: “Cracking analysis based on slip and bond stresses”. Materials Journal, Vol. 90, No. 4, 1993, pp. 340-348.10.14359/3890]Search in Google Scholar
[17. Tan R, Hendriks M A, Geiker M & Kanstad T: “Modified cracked membrane model for consistent crack width predictions of reinforced concrete structures subjected to in-plane loading”. Engineering Structures, Vol. 196, No., 2019, pp. 109362.10.1016/j.engstruct.2019.109362]Search in Google Scholar
[18. Oh B H & Kang Y J: “New formulas for maximum crack width and crack spacing in reinforced concrete flexural members”. Structural Journal, Vol. 84, No. 2, 1987, pp. 103-112.10.14359/2787]Search in Google Scholar
[19. Markeset G & Kioumarsi M: “Need for further development in service life modelling of concrete structures in chloride environment”. Procedia Engineering, Vol. 171, No., 2017, pp. 549-556.10.1016/j.proeng.2017.01.371]Search in Google Scholar
[20. Connal J & Berndt M: “Sustainable bridges: 300 year design life for second gateway bridge”. Proceedings: 7th Austroads Bridge Conference, Auckland, New Zealand 2009.]Search in Google Scholar
[21. Vegvesen S: “Håndbok n400 bruprosjektering”. Oslo: Vegdirektoratet, 2009.]Search in Google Scholar
[22. Danner T & Geiker M R: “Long-term influence of concrete surface and crack orientation on self-healing and ingress in cracks–field observations”. Nordic Concrete Research, Vol. 58, No. 1, 2018, pp. 1-16.10.2478/ncr-2018-0001]Search in Google Scholar
[23. Basteskår M, Engen M, Kanstad T & Fosså K T: “A review of literature and code requirements for the crack width limitations for design of concrete structures in serviceability limit states”. Structural Concrete, Vol. 20, No. 2, 2019, pp. 678-688.10.1002/suco.201800183]Search in Google Scholar
[24. ACI 224: “Control of cracking in concrete structures-ACI 224r-01”, American Concrete Institute, 2001.]Search in Google Scholar
[25. Schießl P: “Zur frage der zulässigen rissbreite und der erforderlichen betondeckung im stahlbetonbau unter besonderer berücksichtigung der karbonatisierung des betons”. Technische Universität München; 1976.]Search in Google Scholar
[26. Debernardi P G, Guiglia M & Taliano M: “Effect of secondary cracks for cracking analysis of reinforced concrete tie”. ACI Materials Journal, Vol. 110, No. 2, 2013, pp. 207.10.14359/51685535]Search in Google Scholar
[27. Tan R, Eileraas K, Opkvitne O, Žirgulis G, Hendriks M A, Geiker M, Brekke D E & Kanstad T: “Experimental and theoretical investigation of crack width calculation methods for rc ties”. Structural Concrete, No., 2018.10.1002/suco.201700237]Search in Google Scholar
[28. Broms B B & Lutz L A: “Effects of arrangement of reinforcement on crack width and spacing of reinforced concrete members”. Proceedings: ACI Journal Proceedings, 1965, 1395-1410.]Search in Google Scholar
[29. Illston J & Stevens R: “Internal cracking”. Concrete (London), Vol. 6, No. 7, 1972.]Search in Google Scholar
[30. Leonhardt F: “Crack control in concrete structures, iabse surveys, no. S4/77”. International Association for Bridges and Structural Engineering, No., 1977, pp. 26.]Search in Google Scholar
[31. Nielsen M: “Beton 1–del 3, 2. Udgave (concrete structures 1–part 3)”. Department of Civil Engineering, Technical University of Denmark, Lyngby; 2005.]Search in Google Scholar
[32. Goto Y: “Cracks formed in concrete around deformed tension bars”. Proceedings: ACI Journal Proceedings, 1971, 244-251.]Search in Google Scholar
[33. Beeby A: “Crack control provisions in the new eurocode for the design of concrete structures”. ACI Special Publication, Vol. 204, No., 2001, pp. 57-84.]Search in Google Scholar
[34. Park R & Paulay T: “Reinforced concrete structures”: John Wiley & Sons; 1975.10.1002/9780470172834]Search in Google Scholar
[35. Tan R, Hendriks M A & Kanstad T: “Evaluation of current crack width calculation methods according to eurocode 2 and fib model code 2010”. In: High tech concrete: Where technology and engineering meet. edn.: Springer; 2018: 1610-1618.10.1007/978-3-319-59471-2_185]Search in Google Scholar
[36. Base G D, Read J B, Beeby A & Taylor H: “An investigation of the crack control characteristics of various types of bar in reinforced concrete beams”. In: Research Report No 18. Cement and Concrete Association, London: Cement and Concrete Association Wexham Springs, Slough England; 1966.]Search in Google Scholar
[37. Borges J F: “Cracking and deformability of reinforced concrete beams”: Laboratório Nacional de Engenharia Civil; 1965.]Search in Google Scholar
[38. Base G D, Read J B, Beeby A & Taylor H: “An investigation of the crack control characteristics of various types of bar in reinforced concrete beams”: Cement and Concrete Association, Wexham Springs, Slough, England; 1966.]Search in Google Scholar
[39. de Saint-Venant M: “Mémoire sur la torsion des prismes: Avec des considérations sur leur flexion ainsi que sur l’équilibre intérieur des solides élastiques en général: Et des formules pratiques pour le calcul de leur résistance à divers efforts s’ exerçant simultanément”: Imprimerie nationale; 1856.]Search in Google Scholar
[40. Beeby A W: “The influence of the parameter ϕ/ρ eff on crack widths”. Structural Concrete, Vol. 5, No. 2, 2004, pp. 71-83.10.1680/stco.2004.5.2.71]Search in Google Scholar
[41. Saliger R: “High grade steel in reinforced concrete”. Proceedings: Second Congress of IABSE, Berlin-Munich 1936.]Search in Google Scholar
[42. Watstein D & Parsons D: “Width and spacing of tensile cracks in axially reinforced concrete cylinders”. Journal of Research, National Bureau of Standards, Vol. 31, No. 1, 1943, pp. 1-24.10.6028/jres.031.001]Search in Google Scholar
[43. Naotunna C N, Samarakoon S M S M K & Fosså K T: “Experimental and theoretical behavior of crack spacing of specimens subjected to axial tension and bending.”. Structural Concrete, Vol. 1-18, No., 2020.10.1002/suco.201900587]Search in Google Scholar
[44. Beeby A & Scott R: “Cracking and deformation of axially reinforced members subjected to pure tension”. Magazine of Concrete Research, Vol. 57, No. 10, 2005, pp. 611-621.10.1680/macr.2005.57.10.611]Search in Google Scholar
[45. Taliano M: “Cracking analysis of concrete tie reinforced with two diameter bars accounting for the effect of secondary cracks”. Engineering Structures, Vol. 144, No., 2017, pp. 107-119.10.1016/j.engstruct.2017.04.045]Search in Google Scholar
[46. Rots J G & Blaauwendraad J: “Crack models for concrete, discrete or smeared? Fixed, multi-directional or rotating?”. In: Heron. Edited by Seven-Laboratory, vol. 34. Netherlands: Delft University of Technology; 1989.]Search in Google Scholar
[47. Unanwa C & Mahan M: “Statistical analysis of concrete compressive strengths for california highway bridges”. Journal of Performance of Constructed Facilities, Vol. 28, No. 1, 2012, pp. 157-167.10.1061/(ASCE)CF.1943-5509.0000404]Search in Google Scholar
[48. Naotunna C N, Samarakoon S M S M K & Fosså K T: “Comparison of the experimental crack spacing behaviour with the theorotical predictions”. In: The Nordic Concrete Federation. Oslo, Norway; 2019.]Search in Google Scholar
[49. Gergely P & Lutz L A: “Maximum crack width in reinforced concrete flexural members”. Material Science Special Publication, Vol. 20, No., 1968, pp. 87-117.]Search in Google Scholar
[50. Beeby A W: “An investigation of cracking in slabs spanning one way”. In: Cement and Concrete Association. 1970.]Search in Google Scholar
[51. Borosnyói A & Snóbli I: “Crack width variation within the concrete cover of reinforced concrete members”. Építõanyag, Vol. 62, No. 3, 2010, pp. 70-74.10.14382/epitoanyag-jsbcm.2010.14]Search in Google Scholar
[52. Husain S I & Ferguson P M: “Flexural crack width at the bars in reinforced concrete beams”. In. Center for Highway Research: The University of Texas at Austin; 1968.]Search in Google Scholar
[53. Tammo K & Thelandersson S: “Crack opening near reinforcement bars in concrete structures”. Structural Concrete, Vol. 7, No. 4, 2006, pp. 137-143.10.1680/stco.2006.7.4.137]Search in Google Scholar
[54. Naotunna C N, Samarakoon S M S M K & Fosså K T: “Experimental investigation of crack width variation along the concrete cover depth in reinforced concrete specimens with ribbed bars and smooth bars”. Case Studies in Construction Materials, No., 2021.10.1016/j.cscm.2021.e00593]Search in Google Scholar
[55. Pérez Caldentey A, Corres Peiretti H, Peset Iribarren J & Giraldo Soto A: “Cracking of rc members revisited: Influence of cover, ϕ/ρs, ef and stirrup spacing–an experimental and theoretical study”. Structural Concrete, Vol. 14, No. 1, 2013, pp. 69-78.10.1002/suco.201200016]Search in Google Scholar
[56. Debernardi P G & Taliano M: “An improvement to eurocode 2 and fib model code 2010 methods for calculating crack width in rc structures”. Structural Concrete, Vol. 17, No. 3, 2016, pp. 365-376.10.1002/suco.201500033]Search in Google Scholar
[57. Tammo K & Thelandersson S: “Crack behavior near reinforcing bars in concrete structures”. ACI Structural Journal, Vol. 106, No. 3, 2009, pp. 259.10.14359/56490]Search in Google Scholar
[58. Wang J J, Tao M X & Nie X: “Fracture energy-based model for average crack spacing of reinforced concrete considering size effect and concrete strength variation”. Construction and Building Materials, Vol. 148, No., 2017, pp. 398-410.10.1016/j.conbuildmat.2017.05.082]Search in Google Scholar
[59. Oh H J, Cho Y K & Kim S-M: “Experimental evaluation of crack width movement of continuously reinforced concrete pavement under environmental load”. Construction and Building Materials, Vol. 137, No., 2017, pp. 85-95.10.1016/j.conbuildmat.2017.01.080]Search in Google Scholar
[60. DIN: “En-1992-1-1/NA. 2011–01, National Annex – Nationally determined parameters – Eurocode 2: Design of concrete structures–part 1-1: General rules and rules for buildings. DIN construction standards committee “, Beuth Verlag GmbH, Berlin; 2011.]Search in Google Scholar
[61. Broms B B: “Crack width and crack spacing in reinforced concrete members”. Proceedings: ACI Journal Proceedings, 1965, 1237-1256.]Search in Google Scholar
[62. Naotunna C N, Samarakoon S M S M K & Fosså K T: “Comparison of the behavior of crack width-governing parameters with existing models”. In: Proceedings of the International Conference on Sustainable Materials, Systems and Structures (SMSS2019) vol. Rilem Publications.Vol. 4; 2019: 124-131.]Search in Google Scholar
[63. Rimkus A & Gribniak V: “Experimental investigation of cracking and deformations of concrete ties reinforced with multiple bars”. Construction and Building Materials, Vol. 148, No., 2017, pp. 49-61.10.1016/j.conbuildmat.2017.05.029]Search in Google Scholar
[64. Rospars C & Chauvel D: “Ceos. Fr experimental programme and reference specimen tests results”. European Journal of Environmental and Civil Engineering, Vol. 18, No. 7, 2014, pp. 738-753.10.1080/19648189.2014.912163]Search in Google Scholar
[65. Bisch P: “The ceos. Fr research project-behaviour and assessment of massive structures: Cracking and shrinkage”. Proceedings: Crack width calculation methods for large concrete structures, Oslo, Norway 2017, 11.]Search in Google Scholar
[66. Lee G Y & Kim W: “Cracking and tension stiffening behavior of high-strength concrete tension members subjected to axial load”. Advances in Structural Engineering, Vol. 12, No. 2, 2009, pp. 127-137.10.1260/136943309788251614]Search in Google Scholar
[67. Deluce J R: “Cracking behaviour of steel fibre reinforced concrete containing conventional steel reinforcement”. University of Toronto; 2011.]Search in Google Scholar
[68. Tan R, Hendriks M A, Geiker M & Kanstad T: “Analytical calculation model for predicting cracking behavior of reinforced concrete ties”. Journal of Structural Engineering, Vol. 146, No. 2, 2020, pp. 04019206.10.1061/(ASCE)ST.1943-541X.0002510]Search in Google Scholar
[69. Bado M F, Casas J R & Kaklauskas G: “Distributed sensing in reinforced concrete members for reinforcement strain monitoring, crack detection and bond-slip calculation”. Engineering Structures, Vol. 226, No., 2021, pp. 111385.10.1016/j.engstruct.2020.111385]Search in Google Scholar
[70. Doerr K: “Bond behavior of ribbed reinforcement under transversal pressure”. Proceedings: Nonlinear behavior of reinforced concrete structures; contributions to IASS symposium, 1978, 3-7.]Search in Google Scholar
[71. Beconcini M L, Croce P & Formichi P: “Influence of bond-slip on the behaviour of reinforced concrete beam to column joints”. Proceedings: Proceedings of International fib Symposium “Taylor Made Concrete Structures: New Solutions for our Society”, Amsterdam, 2008, 19-21.10.1201/9781439828410.ch88]Search in Google Scholar
[72. Ciampi V, Eligehausen R, Bertero V V & Popov E P: “Analytical model for deformed bar bond under generalized excitations”. ACI, No., 1981.]Search in Google Scholar
[73. Ciampi V, Eligehausen R, Bertero V V & Popov E P: “Analytical model for concrete anchorages of reinforcing bars under generalized excitations”: College of Engineering, University of California Berkeley, CA, USA; 1982.]Search in Google Scholar
[74. Rilem: “RC 6 bond test for reinforcement steel. 2. Pull-out test, 1983”, RILEM recommendations for the testing and use of constructions materials, 1994, pp. 218-220.]Search in Google Scholar
[75. Cervenka V, Cervenka J & Pukl R: “Atena—a tool for engineering analysis of fracture in concrete”. Sadhana, Vol. 27, No. 4, 2002, pp. 485-492.10.1007/BF02706996]Search in Google Scholar
[76. Kim J K & Park Y D: “Shear strength of reinforced higy strength concrete beams without web reinforcement”. Magazine of Concrete Research, Vol. 46, No. 166, 1994, pp. 7-16.10.1680/macr.1994.46.166.7]Search in Google Scholar
[77. Naotunna C N, Samarakoon S M S M K & Fosså K T: “Identification of the influence of concrete cover thickness and ∅/ρ parameter on crack spacing (forthcoming).”. In: XV International Conference on Durability of Building Materials and Components. Barcelona; 2020.10.23967/dbmc.2020.076]Search in Google Scholar
[78. Kaklauskas G, Ramanauskas R & Jakubovskis R: “Mean crack spacing modelling for rc tension elements”. Engineering Structures, Vol. 150, No., 2017, pp. 843-851.10.1016/j.engstruct.2017.07.090]Search in Google Scholar
[79. Olsen D H & Nielsen M P: “Ny teori til bestemmelse af revneafstande og revnevidder i betonkonstruktioner”: Afdelingen for bærende konstruktioner, Danmarks tekniske højskole; 1990.]Search in Google Scholar
[80. Marti P, Alvarez M, Kaufmann W & Sigrist V: “Tension chord model for structural concrete”. Structural Engineering International, Vol. 8, No. 4, 1998, pp. 287-298.10.2749/101686698780488875]Search in Google Scholar
[81. McLeod C H & Viljoen C: “Quantification of crack prediction models in reinforced concrete under flexural loading”. Structural Concrete, Vol. 20, No. 6, 2019, pp. 2096-2108.10.1002/suco.201900036]Search in Google Scholar
[82. Caldentey A P: “Proposal of new crack width formulas in the eurocode 2, background, experiments, etc.”. Proceedings: Crack width calculation methods for large concrete structures, Oslo 2017, 17.]Search in Google Scholar
[83. Bažant Z P & Oh B H: “Spacing of cracks in reinforced concrete”. Journal of Structural Engineering, Vol. 109, No. 9, 1983, pp. 2066-2085.10.1061/(ASCE)0733-9445(1983)109:9(2066)]Search in Google Scholar
[84. Radnić J & Markota L: “Experimental verification of engineering procedures for calculation of crack width in concrete elements”. International Journal for Engineering Modelling, Vol. 16, No., 2003, pp. 63-69.]Search in Google Scholar
[85. Ouyang C & Shah S P: “Fracture energy approach for predicting cracking of reinforced concrete tensile members”. Structural Journal, Vol. 91, No. 1, 1994, pp. 69-78.10.14359/4499]Search in Google Scholar
[86. Shah S P, Swartz S E & Ouyang C: “Fracture mechanics of concrete: Applications of fracture mechanics to concrete, rock and other quasi-brittle materials”: John Wiley & Sons; 1995, pp.]Search in Google Scholar
[87. Beeby A: “The prediction and control of flexural cracking in reinforced concrete members”. ACI Special Publication, Vol. 30, No., 1971, pp. 55-76.]Search in Google Scholar
[88. Caldentey A P & García R: “Cracking of rc structures: Differences between tension and flexure”. Proceedings: Design and construction of sustainable concrete structures: causes, calculation and consequences of cracks, Oslo Norway 2019, 3.]Search in Google Scholar
[89. García R & Caldentey A P: “Cracking of rc: Tension vs. Flexure”, Madrid: Technical University of Madrid (UPM); 2018.]Search in Google Scholar
[90. García R & Caldentey A P: “Influence of type of loading (tension or bending) on cracking behaviour of reinforced concrete elements. Experimental study”. Engineering Structures, Vol. 222, No., 2020, pp. 111134.10.1016/j.engstruct.2020.111134]Search in Google Scholar
[91. Beeby A, Alander C, Giuriani E, Plizzari G&Pantazopoulou S: “The influence of the parameter φ/ρeff on crack widths. Author’s reply and discussion”. Structural Concrete (London, 1999), Vol. 6, No. 4, 2005, pp. 155-165.10.1680/stco.2005.6.4.155]Search in Google Scholar
[92. Walraven J: “Model code 2010-first complete draft-volume 2: Model code”, vol. 56: fib Fédération internationale du béton; 2010.10.35789/fib.BULL.0056]Search in Google Scholar
[93. Gribniak V, Rimkus A, Caldentey A P & Sokolov A: “Cracking of concrete prisms reinforced with multiple bars in tension–the cover effect”. Engineering Structures, Vol. 220, No., 2020, pp. 110979.10.1016/j.engstruct.2020.110979]Search in Google Scholar
[94. Dawood N & Marzouk H: “Crack width model for thick reinforced concrete plates subjected to in-plane forces”. Canadian Journal of Civil Engineering, Vol. 38, No. 11, 2011, pp. 1262-1273.10.1139/l11-087]Search in Google Scholar
[95. Dawood N & Marzouk H: “Experimental evaluation of the tension stiffening behavior of hsc thick panels”. Engineering Structures, Vol. 33, No. 5, 2011, pp. 1687-1697.10.1016/j.engstruct.2011.02.006]Search in Google Scholar
[96. Barre F, Bisch P, Chauvel D, Cortade J, Coste J F, Dubois J P, Erlicher S, Gallitre E, Labbé P & Mazars J: “Control of cracking in reinforced concrete structures: Research project ceos. Fr”: John Wiley & Sons; 2016.10.1002/9781119347088]Search in Google Scholar
[97. Norge S: “NS-EN 1992-1-1: 2004 and NA: 2008”. “Eurocode 2”, 2008.]Search in Google Scholar
[98. Hornbostel K & Geiker M: “Influence of cracking on reinforcement corrosion”. Proceedings: Crack width calculation methods for large concrete structures, Oslo 2017, 53.]Search in Google Scholar
[99. Makita M, Mori Y & Katawaki K: “Marine corrosion behavior of reinforced concrete exposed at tokyo bay”. ACI Special Publication, Vol. 65, No., 1980, pp. 271-290.]Search in Google Scholar
[100. Berke N S, Dallaire M, Hicks M & Hoopes R: “Corrosion of steel in cracked concrete”. Corrosion, Vol. 49, No. 11, 1993, pp. 934-943.10.5006/1.3316020]Search in Google Scholar
[101. Lin C: “Bond deterioration dueto corrosion of reinforcing steel”. ACI Special Publication, Vol. 65, No., 1980, pp. 255-270.]Search in Google Scholar
[102. Tremper B: “The corrosion of reinforcing steel in cracked concrete”. Proceedings: ACI Journal Proceedings, 1947, 18 (10): 1137-1144.]Search in Google Scholar
[103. Francois R & Arliguie G: “Reinforced concrete: Correlation between cracking and corrosion”. ACI Special Publication, Vol. 126, No., 1991, pp. 1221-1238.]Search in Google Scholar
[104. Kahhaleh K Z: “Corrosion performance of epoxy-coated reinforcement”. The University of Texas at Austin 1995.]Search in Google Scholar
[105. Chen E, Berrocal C G, Löfgren I & Lundgren K: “Correlation between concrete cracks and corrosion characteristics of steel reinforcement in pre-cracked plain and fibre-reinforced concrete beams”. Materials and Structures, Vol. 53, No. 2, 2020, pp. 1-22.10.1617/s11527-020-01466-z]Search in Google Scholar
[106. Ohta T: “Corrosion of reinforcing steel in concrete exposed to sea air”. ACI Special Publication, Vol. 126, No., 1991, pp. 459-478.]Search in Google Scholar
[107. Schiessl P: “Admissible crack width in reinforced concrete structures. Contribution ii, 3-17”. Proceedings: Preliminary reports Vol II, Inter-association Colloquium on the Behaviour of in Service of Concrete Structures, 1975.]Search in Google Scholar
[108. Carević V & Ignjatović I: “Influence of loading cracks on the carbonation resistance of rc elements”. Construction and Building Materials, Vol. 227, No., 2019, pp. 116583.10.1016/j.conbuildmat.2019.07.309]Search in Google Scholar
[109. Schießl P & Raupach M: “Laboratory studies and calculations on the influence of crack width on chloride-induced corrosion of steel in concrete”. Materials Journal, Vol. 94, No. 1, 1997, pp. 56-61.10.14359/285]Search in Google Scholar
[110. Swamy R: “Durability of rebars in concrete.”. Proceedings: The GM Idorn International Symposium on Durability of Concrete, sponsored by Committee 201 on Durability, held at the 1990 Annual ACI Convention in Toronto, Ontario, Canada, 1992.]Search in Google Scholar
[111. Misra S & Uomoto T: “Reinforcement corrosion under simultaneous diverse exposure conditions”. ACI Special Publication, Vol. 126, No., 1991, pp. 423-442.]Search in Google Scholar
[112. Vennesland O & Gjoro O: “Effect of cracks in submerged concrete sea structures on steel corrosion”. Materials Performance, Vol. 20, No. 8, 1981, pp. 49-51.]Search in Google Scholar
[113. Miyagawa K O T: “Chloride corrosion of reinforcing steel in cracked concrete”. ACI Special Publication, Vol. 65, No., 1980, pp. 237-254.]Search in Google Scholar
[114. Liu W & Wang S: “The effect of crack width on chloride-induced corrosion of steel in concrete”. Advances in Materials Science and Engineering, Vol. 2017, No., 2017.10.1155/2017/3968578]Search in Google Scholar
[115. Houston J T, Atimtay E & Ferguson P M: “Corrosion of reinforcing steel embedded in structural concrete”: Center for Highway Research, University of Texas at Austin; 1972, pp.]Search in Google Scholar
[116. O’Neil E F: “Study of reinforced concrete beams exposed to marine environment”. ACI Special Publication, Vol. 65, No., 1980, pp. 113-132.]Search in Google Scholar
[117. Eto S, Matsuo T, Matsumura T, Fujii T & Tanaka M Y: “Quantitative estimation of carbonation and chloride penetration in reinforced concrete by laser-induced breakdown spectroscopy”. Spectrochimica Acta Part B: Atomic Spectroscopy, Vol. 101, No., 2014, pp. 245-253.10.1016/j.sab.2014.09.004]Search in Google Scholar
[118. Marcus P: “Corrosion mechanisms in theory and practice”: CRC Press; 2011.10.1201/b11020]Search in Google Scholar
[119. Campbell-Allen D: “The reduction of cracking in concrete”. Sydney: School of Civil Engineering, University of Sydney; 1979.]Search in Google Scholar
[120. EICC & Favre R: “Ceb design manual on cracking and deformations”: École Polytechnique Fédérale de Lausanne; 1985.]Search in Google Scholar
[121. Johnston J: “Mechanism of vision—a review”. In: Sensory evaluation of appearance of materials. edn.: ASTM International; 1973.10.1520/STP34755S]Search in Google Scholar
[122. Padilla J D & Robles F: “Human response to cracking in concrete slabs”. ACI Special Publication, Vol. 30, No., 1971, pp. 43-54.]Search in Google Scholar