1. bookTom 64 (2021): Zeszyt 1 (June 2021)
Informacje o czasopiśmie
Pierwsze wydanie
30 Sep 2018
Częstotliwość wydawania
2 razy w roku
Otwarty dostęp

Locally Produced UHPC: The Influence of Type and Content of Steel Fibres

Data publikacji: 17 Jul 2021
Tom & Zeszyt: Tom 64 (2021) - Zeszyt 1 (June 2021)
Zakres stron: 31 - 52
Otrzymano: 26 Mar 2021
Przyjęty: 27 May 2021
Informacje o czasopiśmie
Pierwsze wydanie
30 Sep 2018
Częstotliwość wydawania
2 razy w roku

Ultra-high performance concrete might be a competitive alternative to normal concrete for some purposes. But despite research efforts during decades, utilisation is still not widespread. Reasons include limited competence and material availability. This paper presents one step of a research initiative aimed at facilitating the use of UHPC in Norway. The step presented here comprises the accumulated results from investigations on the influence steel fibres (content, type, and hybrid combination) have on material strength and deformation behaviour of locally produced UHPC, made with constituents found in southern Norway. 231 specimens were tested, spanning nine UHPC mixes. Digital Image Correlation (DIC) was successfully used to study crack propagation. Compressive strength of 166 MPa and E-modulus of 46 GPa were obtained, not being influenced by fibre content. The flexural tensile strength was found to be strongly dependent on variations in steel fibre properties and mix design. The highest flexural tensile strength was obtained for prisms with micro straight steel fibres alone, or in 50% combination with macro hooked-end fibres. The experimental results are considered in a theory-informed discussion. Suggestions are made on the use of steel fibres in locally produced UHPC, potentially lowering the cost by 30%.


1. Graybeal B, Brühwiler E, Kim B-S, Toutlemonde F, Voo Y L & Zaghi A: “International Perspective on UHPC in Bridge Engineering”. Journal of Bridge Engineering, Vol. 25, No. 11, 2020, p. 04020094.10.1061/(ASCE)BE.1943-5592.0001630Search in Google Scholar

2. Naaman A E & Wille K: “The path to ultra-high performance fiber reinforced concrete (UHP-FRC): five decades of progress”. Proceedings, HiPerMat 2012, 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Kassel, Germany, March 2012, pp. 3-15.Search in Google Scholar

3. Azmee N M & Shafiq N: “Ultra-high performance concrete: From fundamental to applications”. Case Studies in Construction Materials, Vol. 9, 2018, p. e00197.10.1016/j.cscm.2018.e00197Search in Google Scholar

4. Russell H G & Graybeal B A: “Ultra-high performance concrete: A state-of-the-art report for the bridge community”. FHWA Publication No.: FHWA-HRT-13-060, Federal Highway Administration, United States, 2013, p. 171.Search in Google Scholar

5. Alkaysi M & El-Tawil S: “Effects of variations in the mix constituents of ultra high performance concrete (UHPC) on cost and performance”. Materials and Structures, Vol. 49, No. 10, 2016, pp. 4185-4200.10.1617/s11527-015-0780-6Search in Google Scholar

6. Graybeal B A: “Development of Non-Proprietary Ultra-High Performance Concrete for Use in the Highway Bridge Sector”. FHWA Publication No.: FHWA-HRT-13-100, Federal Highway Administration, United States, 2013, p. 8.Search in Google Scholar

7. Larsen I L, Terjesen O, Thorstensen R T & Kanstad T: “Use of Concrete for Road Infrastructure: A SWOT Analysis Related to the three Catchwords Sustainability, Industrialisation and Digitalisation”. Nordic Concrete Research, Vol. 60, No. 1, 2019, p. 31.10.2478/ncr-2019-0007Search in Google Scholar

8. Alsalman A, Dang C N & Hale W M: “Development of ultra-high performance concrete with locally available materials”. Construction and Building Materials, Vol. 133, 2017, pp. 135-145.10.1016/j.conbuildmat.2016.12.040Search in Google Scholar

9. Wille K, Naaman A E & Parra-Montesinos G J: “Ultra-High Performance Concrete with Compressive Strength Exceeding 150 MPa (22 ksi): A Simpler Way”. ACI Materials Journal, Vol. 108, No. 1, 2011, pp. 46-54.10.14359/51664215Search in Google Scholar

10. Fidjestol P, Thorsteinsen R & Svennevig P: “Making UHPC with local materials—the way forward”. Proceedings, HiPerMat 2012, 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Kassel, Germany, March 2012, pp. 207-214.Search in Google Scholar

11. Jacobsen S, Haugen L C & Arntsen B: “Developing Ultra High Performance Concrete for concrete products”. Nordic Concrete Research, Vol. 33, No. 1, 2005, pp. 156-158.Search in Google Scholar

12. Camacho E, López J Á & Serna P: “Definition of three levels of performance for UHPFRCVHPFRC with available materials”. Proceedings, HiPerMat 2012, 3rd international symposium on UHPC and Nanotechnology for high performance construction materials, Kassel, 2012, pp. 249-256.Search in Google Scholar

13. Bache H H: “Introduction to compact reinforced composite”. Nordic Concrete Research, Vol. 6, 1987, pp. 19-33.Search in Google Scholar

14. Martius-Hammer T A, Wagner E, Schramm R, Fosså K T & Berge J: “Construction of large UHPC structures - Experience from a slipforming mock-up test”. Proceedings, FIB 2018 - Proceedings for the 2018 fib Congress: Better, Smarter, Stronger, 2019, pp. 3571-3580.Search in Google Scholar

15. Aarup B, Jensen L R & Ellegaard P: “Slender CRC columns”. Nordic Concrete Research, Vol. 34, No. 2, 2005, pp. 80-97.Search in Google Scholar

16. Aarup B K: “A type of UHPC not quite up to standards”. Proceedings, AFGC-ACI-fib-RILEM Int. Symposium on Ultra-High Performance Fibre-Reinforced Concrete (UHPFRC 2017), Montpellier, France, October 2017, Vol. 2, pp. 965-974.Search in Google Scholar

17. Bergsagel D, Granlund M, Klausen S S & Skårnes A: “Ultra-high performance concrete (UHPC) – The influence of curing regime, fibre and aggregate”. (“Ultrahøyfast betong (UHPC) – Innvirkning av herderegime, fiber og sand på betongens egenskaper”). Bachelor Thesis, University of Agder, Department of Engineering Sciences, Grimstad, Norway, 2020. (in Norwegian).Search in Google Scholar

18. Stengel T & Schießl P: “Sustainable construction with UHPC–from life cycle inventory data collection to environmental impact assessment”. Proceedings, Second International Symposium on Ultra High Performance Concrete, Kassel, Germany, March 2008, pp. 461-468.Search in Google Scholar

19. Yoo D Y, Kang S T & Yoon Y S: “Enhancing the flexural performance of ultra-high-performance concrete using long steel fibers”. Composite Structures, Vol. 147, 2016, pp. 220-230.10.1016/j.compstruct.2016.03.032Search in Google Scholar

20. Gesoglu M, Güneyisi E, Muhyaddin G F & Asaad D S: “Strain hardening ultra-high performance fiber reinforced cementitious composites: Effect of fiber type and concentration”. Composites Part B: Engineering, Vol. 103, 2016, pp. 74-83.10.1016/j.compositesb.2016.08.004Search in Google Scholar

21. Yoo D Y, Kim M J, Kim S W & Park J J: “Development of cost effective ultra-high-performance fiber-reinforced concrete using single and hybrid steel fibers”. Construction and Building Materials, Vol. 150, 2017, pp. 383-394.10.1016/j.conbuildmat.2017.06.018Search in Google Scholar

22. Meng W & Khayat K H: “Effect of Hybrid Fibers on Fresh Properties, Mechanical Properties, and Autogenous Shrinkage of Cost-Effective UHPC”. Journal of Materials in Civil Engineering, Vol. 30, No. 4, 2018, p. 04018030.10.1061/(ASCE)MT.1943-5533.0002212Search in Google Scholar

23. Wu Z, Shi C, He W & Wu L: “Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete”. Construction and Building Materials, Vol. 103, 2016, pp. 8-14.10.1016/j.conbuildmat.2015.11.028Search in Google Scholar

24. Wu Z, Shi C, He W & Wang D: “Static and dynamic compressive properties of ultra-high performance concrete (UHPC) with hybrid steel fiber reinforcements”. Cement and Concrete Composites, Vol. 79, 2017, pp. 148-157.10.1016/j.cemconcomp.2017.02.010Search in Google Scholar

25. Markovic I: “High-performance hybrid-fibre concrete: development and utilisation”. PhD Thesis, Delft University of Technology, Civil Engineering and Geosciences, Delft, The Netherlands, 2006, 228.Search in Google Scholar

26. Larsen I L & Thorstensen R T: “The influence of steel fibres on compressive and tensile strength of ultra high performance concrete: A review”. Construction and Building Materials, Vol. 256, 2020, p. 119459.10.1016/j.conbuildmat.2020.119459Search in Google Scholar

27. Richard P & Cheyrezy M: “Composition of reactive powder concretes”. Cement and Concrete Research, Vol. 25, No. 7, 1995, pp. 1501-1511.10.1016/0008-8846(95)00144-2Search in Google Scholar

28. Yu R, Spiesz P & Brouwers H J H: “Development of an eco-friendly Ultra-High Performance Concrete (UHPC) with efficient cement and mineral admixtures uses”. Cement and Concrete Composites, Vol. 55, 2015, pp. 383-394.10.1016/j.cemconcomp.2014.09.024Search in Google Scholar

29. Wille K & Boisvert-Cotulio C: “Material efficiency in the design of ultra-high performance concrete”. Construction and Building Materials, Vol. 86, 2015, pp. 33-43.10.1016/j.conbuildmat.2015.03.087Search in Google Scholar

30. Yoo D Y, Kim S, Park G J, Park J J & Kim S W: “Effects of fiber shape, aspect ratio, and volume fraction on flexural behavior of ultra-high-performance fiber-reinforced cement composites”. Composite Structures, Vol. 174, 2017, pp. 375-388.10.1016/j.compstruct.2017.04.069Search in Google Scholar

31. Le Hoang A & Fehling E: “Influence of steel fiber content and aspect ratio on the uniaxial tensile and compressive behavior of ultra high performance concrete”. Construction and Building Materials, Vol. 153, 2017, pp. 790-806.10.1016/j.conbuildmat.2017.07.130Search in Google Scholar

32. Shi C, Wu Z, Xiao J, Wang D, Huang Z & Fang Z: “A review on ultra high performance concrete: Part I. Raw materials and mixture design”. Construction and Building Materials, Vol. 101, 2015, pp. 741-751.10.1016/j.conbuildmat.2015.10.088Search in Google Scholar

33. Funk J E & Dinger D R: “Derivation of the Dinger-Funk Particle Size Distribution Equation”. “Predictive Process Control of Crowded Particulate Suspensions: Applied to Ceramic Manufacturing”, Springer US, Boston, MA, 1994, pp. 75-83.10.1007/978-1-4615-3118-0_6Search in Google Scholar

34. Andreasen A H M & Andersen J: “On the relationship between grain gradation and space in products made from loose grains (with some experiments)”. (“Ueber die Beziehung zwischen Kornabstufung und Zwischenraum in Produkten aus losen Körnern (mit einigen Experimenten”). Kolloid-Zeitschrift, Vol. 50, No. 3, 1930, pp. 217-228. (in German)10.1007/BF01422986Search in Google Scholar

35. Graybeal B A: “Material property characterization of ultra-high performance concrete”. FHWA Publication No.: FHWA-HRT-06-103, Federal Highway Administration, United States, 2006, p. 186.Search in Google Scholar

36. ASTM International: “ASTM C230/C230M-14, Standard Specification for Flow Table for Use in Tests of Hydraulic Cement”. West Conshohocken, PA, United States, 2014, p. 7.Search in Google Scholar

37. European Committee for Standardization: “NS-EN 12350-7: 2009, Testing fresh concrete: Air content–Pressure methods”. NS-EN 12350-7: 2009, Brussels, Belgium, 2009, p. 28.Search in Google Scholar

38. European Committee for Standardization: “NS-EN 12390-3:2009, Testing hardened concrete - Part 3: Compressive strength of test specimens”. NS-EN 12390-3:2009, Brussels, Belgium, 2009, p. 24.Search in Google Scholar

39. European Committee for Standardization: “NS-EN 12390-13:2013, Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression”. NS-EN 12390-13:2013, Brussels, Belgium, 2014, p. 20.Search in Google Scholar

40. ASTM International: “ASTM C293 / C293M-16, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)”. West Conshohocken, PA, United States, 2016, p. 4.Search in Google Scholar

41. Del Monte E, Boschi S & Vignoli A: “Prediction of compression strength of ancient mortars through in situ drilling resistance technique”. Construction and Building Materials, Vol. 237, 2020, p. 117563.10.1016/j.conbuildmat.2019.117563Search in Google Scholar

42. Wille K, Xu M, El-Tawil S & Naaman A E: “Dynamic impact factors of strain hardening UHP-FRC under direct tensile loading at low strain rates”. Materials and Structures/Materiaux et Constructions, Vol. 49, No. 4, 2016, pp. 1351-1365.10.1617/s11527-015-0581-ySearch in Google Scholar

43. Xu L, Wu F, Chi Y, Cheng P, Zeng Y & Chen Q: “Effects of coarse aggregate and steel fibre contents on mechanical properties of high performance concrete”. Construction and Building Materials, Vol. 206, 2019, pp. 97-110.10.1016/j.conbuildmat.2019.01.190Search in Google Scholar

44. Raju R A, Lim S, Akiyama M & Kageyama T: “Effects of concrete flow on the distribution and orientation of fibers and flexural behavior of steel fiber-reinforced self-compacting concrete beams”. Construction and Building Materials, Vol. 262, 2020, p. 119963.10.1016/j.conbuildmat.2020.119963Search in Google Scholar

45. Boulekbache B, Hamrat M, Chemrouk M & Amziane S: “Flowability of fibre-reinforced concrete and its effect on the mechanical properties of the material”. Construction and Building Materials, Vol. 24, No. 9, 2010, pp. 1664-1671.10.1016/j.conbuildmat.2010.02.025Search in Google Scholar

46. Abdallah S, Fan M & Rees D W: “Bonding mechanisms and strength of steel fiber– reinforced cementitious composites: overview”. Journal of Materials in Civil Engineering, Vol. 30, No. 3, 2018, p. 04018001.10.1061/(ASCE)MT.1943-5533.0002154Search in Google Scholar

47. Markovic I, Walraven J & Van Mier J: “Tensile behaviour of high performance hybrid fibre concrete”. Proceedings, 5th International Symposium on Fracture Mechanics of Concrete and Concrete Structures, Vail Colorado, 2004, Vol. 2, pp. 1113-1121.Search in Google Scholar

Polecane artykuły z Trend MD

Zaplanuj zdalną konferencję ze Sciendo