PLA filament is not equal to PLA filament: Experimental studies of the influence of the type of pigment on the mechanical and thermal properties of poly(lactic acid) products
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Huang SH, Liu P, Mokasdar A, Hou L. Additive manufacturing and its societal impact: a literature review. Int. J. Adv. Manuf. Tech. 2013;67(5/8): 1191–1203. doi:10.1007/s00170-012-4558-5HuangSHLiuPMokasdarAHouL.Additive manufacturing and its societal impact: a literature review.. 2013;67(5/8): 1191–1203. doi:10.1007/s00170-012-4558-5Open DOISearch in Google Scholar
Gao W, Zhang Y, Ramanujan D et al. The status, challenges, and future of additive manufacturing in engineering. Comput. Aided Design. 2015;69: 65–89. doi:10.1016/j.cad.2015.04.001GaoWZhangYRamanujanDThe status challenges, and future of additive manufacturing in engineering.. 2015;69: 65–89. doi:10.1016/j.cad.2015.04.001Open DOISearch in Google Scholar
Boydston AJ, Cao B, Nelson A et al. Additive manufacturing with stimuli-responsive materials. J. Mater. Chem. A. 2018; 6(42): 20621–45. doi:10.1039/C8TA07716ABoydstonAJCaoBNelsonAAdditive manufacturing with stimuli-responsive materials.. 2018;6(42)Search in Google Scholar
Schwartz JJ, Hamel J, Ekstrom T et al.. Not all PLA filaments are created equal: an experimental investigation. Rapid Prototyping J. 2020;26(7): 1263–76. doi:10.1108/RPJ-06-2019-0179SchwartzJJHamelJEkstromTNot all PLA filaments are created equal: an experimental investigation.. 2020;26(7): 1263–76. doi:10.1108/RPJ-06-2019-0179Open DOISearch in Google Scholar
Cotteleer M. 3D opportunity: additive manufacturing paths to performance, innovation, and growth. Deloitte Rev. 2014;14: 5–19CotteleerM.3D opportunity: additive manufacturing paths to performance innovation, and growth.. 2014;14: 5–19Search in Google Scholar
Ngo TD, Kashani A, Imbalzano G et al. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Compos. Part B-Eng. 2018;143: 172–96. doi:10.1016/j.compositesb.2018.02.012.NgoTDKashaniAImbalzanoGAdditive manufacturing (3D printing): A review of materials methods, applications and challenges.. 2018;143: 172–96. doi:10.1016/j.compositesb.2018.02.012.Open DOISearch in Google Scholar
Rouf S, Raina A, Ul Haq MI et al. 3D printed parts and mechanical properties: Influencing parameters, sustainability aspects, global market scenario, challenges and applications. Adv. Ind. Eng. Polym. Res. 2022;5(3): 143–58. doi:10.1016/j.aiepr.2022.02.001RoufSRainaAUl HaqMI3D printed parts and mechanical properties: Influencing parameters sustainability aspects global market scenario
challenges and applications.. 2022;5(3): 143–58. doi:10.1016/j.aiepr.2022.02.001Open DOISearch in Google Scholar
Huang Y, Leu MC, Mazumder J et al. Additive manufacturing: current state, future potential, gaps and needs, and recommendations. J. Manuf. Sci. Eng. 2015;137(1): 1–10. doi:10.1115/1.4028725HuangYLeuMCMazumderJAdditive manufacturing: current state future potential gaps and needs and recommendations.. 2015;137(1): 1–10. doi:10.1115/1.4028725Open DOISearch in Google Scholar
Stansbury JW, Idacavage MJ. 3D printing with polymers: challenges among expanding options and opportunities. Dent. Mater. 2016;32(1), 54–64. doi:10.1016/j.dental.2015.09.018StansburyJWIdacavageMJ.3D printing with polymers: challenges among expanding options and opportunities.. 2016;32(1), 54–64. doi:10.1016/j.dental.2015.09.018Open DOISearch in Google Scholar
Steenhuis HJ, Pretorius L. The additive manufacturing innovation: a range of implications: J. Manuf. Technol. Manag. 2017;28(1): 122–43. doi:10.1108/JMTM-06-2016-0081SteenhuisHJPretoriusL.The additive manufacturing innovation: a range of implications:. 2017;28(1): 122–43. doi:10.1108/JMTM-06-2016-0081Open DOISearch in Google Scholar
Dodziuk H. Druk 3D/AM. Zastosowanie oraz skutki społeczne i gospodarcze. Warszawa: Wydawnictwo Naukowe PWN; 2019DodziukH.Druk 3D/AM..Warszawa:Wydawnictwo Naukowe PWN;2019Search in Google Scholar
Balletti C, Ballarin M, Guerra F. 3D printing: state of the art and future perspectives. J. Cult. Herit. 2017;26: 172–82. doi:10.1016/j.culher.2017.02.010BallettiCBallarinMGuerraF.3D printing: state of the art and future perspectives.. 2017;26: 172–82. doi:10.1016/j.culher.2017.02.010Open DOISearch in Google Scholar
Soares JB, Finamor J, Silva FP et al. Analysis of the influence of polylactic acid (PLA) colour on FDM 3D printing temperature and part finishing. Rapid Prototyping J. 2018;24(8): 1305–16. doi:10.1108/RPJ-09-2017-0177SoaresJBFinamorJSilvaFPAnalysis of the influence of polylactic acid (PLA) colour on FDM 3D printing temperature and part finishing.. 2018;24(8): 1305–16. doi:10.1108/RPJ-09-2017-0177Open DOISearch in Google Scholar
Bamiduro O, Owolabi G, Haile MA et al. The influence of load direction, microstructure, raster orientation on the quasi-static response of fused deposition modeling ABS. Rapid Prototyping J. 2019;25(3): 462–72. doi:10.1108/RPJ-04-2018-0087BamiduroOOwolabiGHaileMAThe influence of load direction microstructure, raster orientation on the quasi-static response of fused deposition modeling ABS.. 2019;25(3): 462–72. doi:10.1108/RPJ-04-2018-0087Open DOISearch in Google Scholar
Fernandes J, Deus AM, Reis L et al. Study of the influence of 3D printing parameters on the mechanical properties of PLA. Materials from 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018), Singapore, 2018, 547-52FernandesJDeusAMReisLStudy of the influence of 3D printing parameters on the mechanical properties of PLA.,Singapore,2018, 547–52Search in Google Scholar
Chacon JM, Caminero MA, García-Plaza E et al. Additive manufacturing of PLA structures using fused deposition modelling: effect of process parameters on mechanical properties and their optimal selection. Mater. Design. 2017;124: 143–57. doi:10.1016/j.matdes.2017.03.065ChaconJMCamineroMAGarcía-PlazaEAdditive manufacturing of PLA structures using fused deposition modelling: effect of process parameters on mechanical properties and their optimal selection.. 2017;124: 143–57. doi:10.1016/j.matdes.2017.03.065Open DOISearch in Google Scholar
Lanzotti A, Grasso M, Staiano G et al. The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer. Rapid Prototyping J. 2015;21(5): 604–17. doi:10.1108/RPJ-09-2014-0135LanzottiAGrassoMStaianoGThe impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer.. 2015;21(5): 604–17. doi:10.1108/RPJ-09-2014-0135Open DOISearch in Google Scholar
Benwood C, Anstey A, Andrzejewski J et al. Improving the impact strength and heat resistance of 3D printed models: structure, property, and processing correlationships during fused deposition modeling (FDM) of poly(lactic acid). ACS Omega. 2018;3(4): 4400–11. doi:10.1021/acsomega.8b00129BenwoodCAnsteyAAndrzejewskiJImproving the impact strength and heat resistance of 3D printed models: structure, property, and processing correlationships during fused deposition modeling (FDM) of poly(lactic acid).. 2018;3(4): 4400–11. doi:10.1021/acsomega.8b00129Open DOISearch in Google Scholar
Singh S, Singh M, Prakash C et al. Optimization and reliability analysis to improve surface quality and mechanical characteristics of heat-treated fused filament fabricated parts. Int. J. Adv. Manuf. Tech. 2019;102(5/8): 1–16. doi:10.1007/s00170-018-03276-8SinghSSinghMPrakashCOptimization and reliability analysis to improve surface quality and mechanical characteristics of heat-treated fused filament fabricated parts.. 2019;102(5/8): 1–16. doi:10.1007/s00170-018-03276-8Open DOISearch in Google Scholar
Nguyen NA, Bowland CC, Naskar AK. A general method to improve 3D-printability and inter-layer adhesion in lignin-based composites. Appl. Mater. Today. 2018;12: 138–52. doi:10.1016/j.apmt.2018.03.009NguyenNABowlandCCNaskarAK.A general method to improve 3D-printability and inter-layer adhesion in lignin-based composites.. 2018;12: 138–52. doi:10.1016/j.apmt.2018.03.009Open DOISearch in Google Scholar
Davidson JR, Appuhamillage GA, Thompson CM et al. Design paradigm utilizing reversible Diels-Alder reactions to enhance the mechanical properties of 3D printed materials. ACS Appl. Mater. Inter. 2016;8(26): 16961–6. doi:10.1021/acsami.6b05118DavidsonJRAppuhamillageGAThompsonCMDesign paradigm utilizing reversible Diels-Alder reactions to enhance the mechanical properties of 3D printed materials.. 2016;8(26): 16961–6. doi:10.1021/acsami.6b05118Open DOISearch in Google Scholar
Jin Y, Wan Y, Zhang B et al. Modeling of the chemical finishing process for polylactic acid parts in fused deposition modeling and investigation of its tensile properties. J. Mater. Process. Tech. 2017;240: 233–9. doi:10.1016/j.jmatprotec.2016.10.003JinYWanYZhangBModeling of the chemical finishing process for polylactic acid parts in fused deposition modeling and investigation of its tensile properties.. 2017;240: 233–9. doi:10.1016/j.jmatprotec.2016.10.003Open DOISearch in Google Scholar
Cristea M, Ionita D, Iftime MM. Dynamic Mechanical Analysis Investigations of PLA-Based Renewable Materials: How Are They Useful? Materials. 2020;13(22), 5302–22. doi:10.3390/ma13225302CristeaMIonitaDIftimeMM.Dynamic Mechanical Analysis Investigations of PLA-Based Renewable Materials: How Are They Useful?. 2020;13(22),5302–22. doi:10.3390/ma13225302Open DOISearch in Google Scholar
Müller AJ, Ávila M, Saenz G et al. CHAPTER 3. Crystallization of PLA-based Materials, in: Jiménez A, Peltzer M, Ruseckaite R (eds.) RSC Polymer Chemistry Series, No. 12. Cambridge: Royal Society of Chemistry; 2014. doi:10.1039/9781782624806-00066MüllerAJÁvilaMSaenzGCHAPTER 3. Crystallization of PLA-based Materials,JiménezAPeltzerMRuseckaiteR (eds.) .Cambridge:Royal Society of Chemistry;2014. doi:10.1039/9781782624806-00066Open DOISearch in Google Scholar
Rueda MM, Auscher MC, Fulchiron R et al. Rheology and applications of highly filled polymers: a review of current understanding. Prog. Polym. Sci. 2017;66: 22–53. doi:10.1016/j.progpolymsci.2016.12.007RuedaMMAuscherMCFulchironRRheology and applications of highly filled polymers: a review of current understanding.. 2017;66: 22–53. doi:10.1016/j.progpolymsci.2016.12.007Open DOISearch in Google Scholar
Wittbrodt B, Pearce JM. The effects of PLA colour on material properties of 3D printed components. Addit. Manuf. 2015;8: 110–6. doi:10.1016/j.addma.2015.09.006
WittbrodtBPearceJM.The effects of PLA colour on material properties of 3D printed components.. 2015;8: 110–6. doi:10.1016/j.addma.2015.09.006Open DOISearch in Google Scholar
Bociąga E, Postawa P, Trzaskalska M. Influence of coloring agents and injection process conditions on the mechanical properties of ABS. Polymer Processing, 2012;18(3): 143-146 (in Polish)BociągaEPostawaPTrzaskalskaM.Influence of coloring agents and injection process conditions on the mechanical properties of ABS.,2012;18(3): 143–146 (in Polish)Search in Google Scholar
Bociąga E, Trzaskalska M. Influence of polymer processing parameters and coloring agents on gloss and color of acrylonitrile-butadiene-styrene terpolymer moldings. Polimery. 2021;61(7/8): 544–550. doi: 10.14314/polimery.2016.544BociągaETrzaskalskaM.Influence of polymer processing parameters and coloring agents on gloss and color of acrylonitrile-butadiene-styrene terpolymer moldings.. 2021;61(7/8): 544–550. doi:10.14314/polimery.2016.544Open DOISearch in Google Scholar
Valerga AP, Batista M, Salguero J et al. Influence of PLA filament conditions on characteristics of FDM parts. Materials. 2018;11(8): 1322. doi:10.3390/ma11081322ValergaAPBatistaMSalgueroJInfluence of PLA filament conditions on characteristics of FDM parts.. 2018;11(8): 1322. doi:10.3390/ma11081322Open DOISearch in Google Scholar
Standardization roadmap for additive manufacturing V.2.0, America Makes & ANSI Additive Manufacturing Standardization Collaborative (AMSC), Jun 2018, USA,Jun2018,USASearch in Google Scholar
Bigg DM. Polylactide copolymers: Effect of copolymer ratio and end capping on their properties. Adv. Polym. Tech. 2005;24(2): 69–82. doi:10.1002/adv.20032BiggDM.Polylactide copolymers: Effect of copolymer ratio and end capping on their properties.. 2005;24(2): 69–82. doi:10.1002/adv.20032Open DOISearch in Google Scholar
Pyda M, Czerniecka-Kubicka A. Thermal Properties and Thermodynamics of Poly(l-lactic acid. in: Di Lorenzo ML, Androsch R. (eds.) Synthesis, Structure and Properties of Poly(lactic acid). Cham: Springer International Publishing; 2018, 153. doi:10.1007/978-3-319-64230-7PydaMCzerniecka-KubickaA.Thermal Properties and Thermodynamics of Poly(l-lactic acid.in:Di LorenzoMLAndroschR.(eds.). (eds.) Cham:Springer International Publishing;2018,153. doi:10.1007/978-3-319-64230-7Open DOISearch in Google Scholar
Hortos M, Vinas M, Espino S et al. Influence of temperature on high molecular weight poly(lactic acid) stereocomplex formation. Express Polym. Lett. 2019;13(2): 123–34. doi:10.3144/expresspolymlett.2019.12HortosMVinasMEspinoSInfluence of temperature on high molecular weight poly(lactic acid) stereocomplex formation.. 2019;13(2): 123–34. doi:10.3144/expresspolymlett.2019.12Open DOISearch in Google Scholar
Shen L, Worrell E, Patel M. Present and future development in plastics from biomass. Biofuel. Bioprod. Bior. 2010;4(1): 25–40. doi:10.1002/bbb.189ShenLWorrellEPatelM.Present and future development in plastics from biomass.. 2010;4(1): 25–40. doi:10.1002/bbb.189Open DOISearch in Google Scholar
Gracia-Fernández CA, Gómez-Barreiro S, López-Beceiro J et al. New approach to the double melting peak of poly(l-lactic acid) observed by DSC. J. Mater. Res. 2012;27(10): 1379–82. doi:10.1557/jmr.2012.57Gracia-FernándezCAGómez-BarreiroSLópez-BeceiroJNew approach to the double melting peak of poly(l-lactic acid) observed by DSC.. 2012;27(10): 1379–82. doi:10.1557/jmr.2012.57Open DOISearch in Google Scholar
Foglia F, De Meo A, Iozzino V et al. Isothermal crystallization of PLA: Nucleation density and growth rates of α and α′ phases. Can. J. Chem. Eng. 2020;98(9): 19982007. doi:10.1002/cjce.23818FogliaFDe MeoAIozzinoVIsothermal crystallization of PLA: Nucleation density and growth rates of α and α′ phases.. 2020;98(9): 1998–2007. doi:10.1002/cjce.23818Open DOISearch in Google Scholar
Mathot VBF. Crystallization of polymers: A personal view on a lifetime in research. J. Therm. Anal. Calorim. 2010;102(2): 403–12. doi:10.1007/s10973-010-0947-xMathotVBF.Crystallization of polymers: A personal view on a lifetime in research.. 2010;102(2): 403–12. doi:10.1007/s10973-010-0947-xOpen DOISearch in Google Scholar