PLA filament is not equal to PLA filament: Experimental studies of the influence of the type of pigment on the mechanical and thermal properties of poly(lactic acid) products

[1] Huang SH, Liu P, Mokasdar A, Hou L. Additive manufacturing and its societal impact: a literature review. Int. J. Adv. Manuf. Tech. 2013;67(5/8): 1191–1203. doi:10.1007/s00170-012-4558-5 Huang SH Liu P Mokasdar A Hou L. Additive manufacturing and its societal impact: a literature review . Int. J. Adv. Manuf. Tech . 2013 ; 67 ( 5/8 ): 1191 – 1203 . doi: 10.1007/s00170-012-4558-5 Open DOISearch in Google Scholar

[2] Gao W, Zhang Y, Ramanujan D et al. The status, challenges, and future of additive manufacturing in engineering. Comput. Aided Design. 2015;69: 65–89. doi:10.1016/j.cad.2015.04.001 Gao W Zhang Y Ramanujan D The status challenges, and future of additive manufacturing in engineering . Comput. Aided Design . 2015 ; 69 : 65 – 89 . doi: 10.1016/j.cad.2015.04.001 Open DOISearch in Google Scholar

[3] Boydston AJ, Cao B, Nelson A et al. Additive manufacturing with stimuli-responsive materials. J. Mater. Chem. A. 2018; 6(42): 20621–45. doi:10.1039/C8TA07716A Boydston AJ Cao B Nelson A Additive manufacturing with stimuli-responsive materials . J. Mater. Chem. A . 2018 ; 6 ( 42 ) Search in Google Scholar

[4] Schwartz JJ, Hamel J, Ekstrom T et al.. Not all PLA filaments are created equal: an experimental investigation. Rapid Prototyping J. 2020;26(7): 1263–76. doi:10.1108/RPJ-06-2019-0179 Schwartz JJ Hamel J Ekstrom T Not all PLA filaments are created equal: an experimental investigation . Rapid Prototyping J . 2020 ; 26 ( 7 ): 1263 – 76 . doi: 10.1108/RPJ-06-2019-0179 Open DOISearch in Google Scholar

[5] Cotteleer M. 3D opportunity: additive manufacturing paths to performance, innovation, and growth. Deloitte Rev. 2014;14: 5–19 Cotteleer M. 3D opportunity: additive manufacturing paths to performance innovation, and growth . Deloitte Rev . 2014 ; 14 : 5 – 19 Search in Google Scholar

[6] Ngo TD, Kashani A, Imbalzano G et al. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Compos. Part B-Eng. 2018;143: 172–96. doi:10.1016/j.compositesb.2018.02.012. Ngo TD Kashani A Imbalzano G Additive manufacturing (3D printing): A review of materials methods, applications and challenges . Compos. Part B-Eng . 2018 ; 143 : 172 – 96 . doi: 10.1016/j.compositesb.2018.02.012. Open DOISearch in Google Scholar

[7] Rouf S, Raina A, Ul Haq MI et al. 3D printed parts and mechanical properties: Influencing parameters, sustainability aspects, global market scenario, challenges and applications. Adv. Ind. Eng. Polym. Res. 2022;5(3): 143–58. doi:10.1016/j.aiepr.2022.02.001 Rouf S Raina A Ul Haq MI 3D printed parts and mechanical properties: Influencing parameters sustainability aspects global market scenario challenges and applications . Adv. Ind. Eng. Polym. Res . 2022 ; 5 ( 3 ): 143 – 58 . doi: 10.1016/j.aiepr.2022.02.001 Open DOISearch in Google Scholar

[8] Huang Y, Leu MC, Mazumder J et al. Additive manufacturing: current state, future potential, gaps and needs, and recommendations. J. Manuf. Sci. Eng. 2015;137(1): 1–10. doi:10.1115/1.4028725 Huang Y Leu MC Mazumder J Additive manufacturing: current state future potential gaps and needs and recommendations . J. Manuf. Sci. Eng . 2015 ; 137 ( 1 ): 1 – 10 . doi: 10.1115/1.4028725 Open DOISearch in Google Scholar

[9] Stansbury JW, Idacavage MJ. 3D printing with polymers: challenges among expanding options and opportunities. Dent. Mater. 2016;32(1), 54–64. doi:10.1016/j.dental.2015.09.018 Stansbury JW Idacavage MJ. 3D printing with polymers: challenges among expanding options and opportunities . Dent. Mater . 2016 ; 32 ( 1 ), 54 – 64 . doi: 10.1016/j.dental.2015.09.018 Open DOISearch in Google Scholar

[10] Steenhuis HJ, Pretorius L. The additive manufacturing innovation: a range of implications: J. Manuf. Technol. Manag. 2017;28(1): 122–43. doi:10.1108/JMTM-06-2016-0081 Steenhuis HJ Pretorius L. The additive manufacturing innovation: a range of implications : J. Manuf. Technol. Manag . 2017 ; 28 ( 1 ): 122 – 43 . doi: 10.1108/JMTM-06-2016-0081 Open DOISearch in Google Scholar

[11] Dodziuk H. Druk 3D/AM. Zastosowanie oraz skutki społeczne i gospodarcze. Warszawa: Wydawnictwo Naukowe PWN; 2019 Dodziuk H. Druk 3D/AM . Zastosowanie oraz skutki społeczne i gospodarcze . Warszawa : Wydawnictwo Naukowe PWN ; 2019 Search in Google Scholar

[12] Balletti C, Ballarin M, Guerra F. 3D printing: state of the art and future perspectives. J. Cult. Herit. 2017;26: 172–82. doi:10.1016/j.culher.2017.02.010 Balletti C Ballarin M Guerra F. 3D printing: state of the art and future perspectives . J. Cult. Herit . 2017 ; 26 : 172 – 82 . doi: 10.1016/j.culher.2017.02.010 Open DOISearch in Google Scholar

[13] Soares JB, Finamor J, Silva FP et al. Analysis of the influence of polylactic acid (PLA) colour on FDM 3D printing temperature and part finishing. Rapid Prototyping J. 2018;24(8): 1305–16. doi:10.1108/RPJ-09-2017-0177 Soares JB Finamor J Silva FP Analysis of the influence of polylactic acid (PLA) colour on FDM 3D printing temperature and part finishing . Rapid Prototyping J . 2018 ; 24 ( 8 ): 1305 – 16 . doi: 10.1108/RPJ-09-2017-0177 Open DOISearch in Google Scholar

[14] Bamiduro O, Owolabi G, Haile MA et al. The influence of load direction, microstructure, raster orientation on the quasi-static response of fused deposition modeling ABS. Rapid Prototyping J. 2019;25(3): 462–72. doi:10.1108/RPJ-04-2018-0087 Bamiduro O Owolabi G Haile MA The influence of load direction microstructure, raster orientation on the quasi-static response of fused deposition modeling ABS . Rapid Prototyping J . 2019 ; 25 ( 3 ): 462 – 72 . doi: 10.1108/RPJ-04-2018-0087 Open DOISearch in Google Scholar

[15] Fernandes J, Deus AM, Reis L et al. Study of the influence of 3D printing parameters on the mechanical properties of PLA. Materials from 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018), Singapore, 2018, 547-52 Fernandes J Deus AM Reis L Study of the influence of 3D printing parameters on the mechanical properties of PLA . Materials from 3rd International Conference on Progress in Additive Manufacturing (Pro-AM 2018) , Singapore , 2018 , 547 – 52 Search in Google Scholar

[16] Chacon JM, Caminero MA, García-Plaza E et al. Additive manufacturing of PLA structures using fused deposition modelling: effect of process parameters on mechanical properties and their optimal selection. Mater. Design. 2017;124: 143–57. doi:10.1016/j.matdes.2017.03.065 Chacon JM Caminero MA García-Plaza E Additive manufacturing of PLA structures using fused deposition modelling: effect of process parameters on mechanical properties and their optimal selection . Mater. Design . 2017 ; 124 : 143 – 57 . doi: 10.1016/j.matdes.2017.03.065 Open DOISearch in Google Scholar

[17] Lanzotti A, Grasso M, Staiano G et al. The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer. Rapid Prototyping J. 2015;21(5): 604–17. doi:10.1108/RPJ-09-2014-0135 Lanzotti A Grasso M Staiano G The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer . Rapid Prototyping J . 2015 ; 21 ( 5 ): 604 – 17 . doi: 10.1108/RPJ-09-2014-0135 Open DOISearch in Google Scholar

[18] Benwood C, Anstey A, Andrzejewski J et al. Improving the impact strength and heat resistance of 3D printed models: structure, property, and processing correlationships during fused deposition modeling (FDM) of poly(lactic acid). ACS Omega. 2018;3(4): 4400–11. doi:10.1021/acsomega.8b00129 Benwood C Anstey A Andrzejewski J Improving the impact strength and heat resistance of 3D printed models: structure, property, and processing correlationships during fused deposition modeling (FDM) of poly(lactic acid) . ACS Omega . 2018 ; 3 ( 4 ): 4400 – 11 . doi: 10.1021/acsomega.8b00129 Open DOISearch in Google Scholar

[19] Singh S, Singh M, Prakash C et al. Optimization and reliability analysis to improve surface quality and mechanical characteristics of heat-treated fused filament fabricated parts. Int. J. Adv. Manuf. Tech. 2019;102(5/8): 1–16. doi:10.1007/s00170-018-03276-8 Singh S Singh M Prakash C Optimization and reliability analysis to improve surface quality and mechanical characteristics of heat-treated fused filament fabricated parts . Int. J. Adv. Manuf. Tech . 2019 ; 102 ( 5/8 ): 1 – 16 . doi: 10.1007/s00170-018-03276-8 Open DOISearch in Google Scholar

[20] Nguyen NA, Bowland CC, Naskar AK. A general method to improve 3D-printability and inter-layer adhesion in lignin-based composites. Appl. Mater. Today. 2018;12: 138–52. doi:10.1016/j.apmt.2018.03.009 Nguyen NA Bowland CC Naskar AK. A general method to improve 3D-printability and inter-layer adhesion in lignin-based composites . Appl. Mater. Today . 2018 ; 12 : 138 – 52 . doi: 10.1016/j.apmt.2018.03.009 Open DOISearch in Google Scholar

[21] Davidson JR, Appuhamillage GA, Thompson CM et al. Design paradigm utilizing reversible Diels-Alder reactions to enhance the mechanical properties of 3D printed materials. ACS Appl. Mater. Inter. 2016;8(26): 16961–6. doi:10.1021/acsami.6b05118 Davidson JR Appuhamillage GA Thompson CM Design paradigm utilizing reversible Diels-Alder reactions to enhance the mechanical properties of 3D printed materials . ACS Appl. Mater. Inter . 2016 ; 8 ( 26 ): 16961 – 6 . doi: 10.1021/acsami.6b05118 Open DOISearch in Google Scholar

[22] Jin Y, Wan Y, Zhang B et al. Modeling of the chemical finishing process for polylactic acid parts in fused deposition modeling and investigation of its tensile properties. J. Mater. Process. Tech. 2017;240: 233–9. doi:10.1016/j.jmatprotec.2016.10.003 Jin Y Wan Y Zhang B Modeling of the chemical finishing process for polylactic acid parts in fused deposition modeling and investigation of its tensile properties . J. Mater. Process. Tech . 2017 ; 240 : 233 – 9 . doi: 10.1016/j.jmatprotec.2016.10.003 Open DOISearch in Google Scholar

[23] Cristea M, Ionita D, Iftime MM. Dynamic Mechanical Analysis Investigations of PLA-Based Renewable Materials: How Are They Useful? Materials. 2020;13(22), 5302–22. doi:10.3390/ma13225302 Cristea M Ionita D Iftime MM. Dynamic Mechanical Analysis Investigations of PLA-Based Renewable Materials: How Are They Useful? Materials . 2020 ; 13 ( 22 ), 5302 – 22 . doi: 10.3390/ma13225302 Open DOISearch in Google Scholar

[24] Müller AJ, Ávila M, Saenz G et al. CHAPTER 3. Crystallization of PLA-based Materials, in: Jiménez A, Peltzer M, Ruseckaite R (eds.) RSC Polymer Chemistry Series, No. 12. Cambridge: Royal Society of Chemistry; 2014. doi:10.1039/9781782624806-00066 Müller AJ Ávila M Saenz G CHAPTER 3. Crystallization of PLA-based Materials , Jiménez A Peltzer M Ruseckaite R (eds.) RSC Polymer Chemistry Series No. 12 . Cambridge : Royal Society of Chemistry ; 2014 . doi: 10.1039/9781782624806-00066 Open DOISearch in Google Scholar

[25] Rueda MM, Auscher MC, Fulchiron R et al. Rheology and applications of highly filled polymers: a review of current understanding. Prog. Polym. Sci. 2017;66: 22–53. doi:10.1016/j.progpolymsci.2016.12.007 Rueda MM Auscher MC Fulchiron R Rheology and applications of highly filled polymers: a review of current understanding . Prog. Polym. Sci . 2017 ; 66 : 22 – 53 . doi: 10.1016/j.progpolymsci.2016.12.007 Open DOISearch in Google Scholar

[26] Wittbrodt B, Pearce JM. The effects of PLA colour on material properties of 3D printed components. Addit. Manuf. 2015;8: 110–6. doi:10.1016/j.addma.2015.09.006 Wittbrodt B Pearce JM. The effects of PLA colour on material properties of 3D printed components . Addit. Manuf . 2015 ; 8 : 110 – 6 . doi: 10.1016/j.addma.2015.09.006 Open DOISearch in Google Scholar

[27] Bociąga E, Postawa P, Trzaskalska M. Influence of coloring agents and injection process conditions on the mechanical properties of ABS. Polymer Processing, 2012;18(3): 143-146 (in Polish) Bociąga E Postawa P Trzaskalska M. Influence of coloring agents and injection process conditions on the mechanical properties of ABS . Polymer Processing , 2012 ; 18 ( 3 ): 143 – 146 (in Polish) Search in Google Scholar

[28] Bociąga E, Trzaskalska M. Influence of polymer processing parameters and coloring agents on gloss and color of acrylonitrile-butadiene-styrene terpolymer moldings. Polimery. 2021;61(7/8): 544–550. doi: 10.14314/polimery.2016.544 Bociąga E Trzaskalska M. Influence of polymer processing parameters and coloring agents on gloss and color of acrylonitrile-butadiene-styrene terpolymer moldings . Polimery . 2021 ; 61 ( 7/8 ): 544 – 550 . doi: 10.14314/polimery.2016.544 Open DOISearch in Google Scholar

[29] Valerga AP, Batista M, Salguero J et al. Influence of PLA filament conditions on characteristics of FDM parts. Materials. 2018;11(8): 1322. doi:10.3390/ma11081322 Valerga AP Batista M Salguero J Influence of PLA filament conditions on characteristics of FDM parts . Materials . 2018 ; 11 ( 8 ): 1322 . doi: 10.3390/ma11081322 Open DOISearch in Google Scholar

[30] Standardization roadmap for additive manufacturing V.2.0, America Makes & ANSI Additive Manufacturing Standardization Collaborative (AMSC), Jun 2018, USA Standardization roadmap for additive manufacturing V.2.0, America Makes & ANSI Additive Manufacturing Standardization Collaborative (AMSC) , Jun 2018 , USA Search in Google Scholar

[31] Bigg DM. Polylactide copolymers: Effect of copolymer ratio and end capping on their properties. Adv. Polym. Tech. 2005;24(2): 69–82. doi:10.1002/adv.20032 Bigg DM. Polylactide copolymers: Effect of copolymer ratio and end capping on their properties . Adv. Polym. Tech . 2005 ; 24 ( 2 ): 69 – 82 . doi: 10.1002/adv.20032 Open DOISearch in Google Scholar

[32] Pyda M, Czerniecka-Kubicka A. Thermal Properties and Thermodynamics of Poly(l-lactic acid. in: Di Lorenzo ML, Androsch R. (eds.) Synthesis, Structure and Properties of Poly(lactic acid). Cham: Springer International Publishing; 2018, 153. doi:10.1007/978-3-319-64230-7 Pyda M Czerniecka-Kubicka A. Thermal Properties and Thermodynamics of Poly(l-lactic acid . in: Di Lorenzo ML Androsch R. (eds.) Synthesis, Structure and Properties of Poly(lactic acid) . (eds.) Cham : Springer International Publishing ; 2018 , 153 . doi: 10.1007/978-3-319-64230-7 Open DOISearch in Google Scholar

[33] Hortos M, Vinas M, Espino S et al. Influence of temperature on high molecular weight poly(lactic acid) stereocomplex formation. Express Polym. Lett. 2019;13(2): 123–34. doi:10.3144/expresspolymlett.2019.12 Hortos M Vinas M Espino S Influence of temperature on high molecular weight poly(lactic acid) stereocomplex formation . Express Polym. Lett . 2019 ; 13 ( 2 ): 123 – 34 . doi: 10.3144/expresspolymlett.2019.12 Open DOISearch in Google Scholar

[34] Shen L, Worrell E, Patel M. Present and future development in plastics from biomass. Biofuel. Bioprod. Bior. 2010;4(1): 25–40. doi:10.1002/bbb.189 Shen L Worrell E Patel M. Present and future development in plastics from biomass . Biofuel. Bioprod. Bior . 2010 ; 4 ( 1 ): 25 – 40 . doi: 10.1002/bbb.189 Open DOISearch in Google Scholar

[35] Gracia-Fernández CA, Gómez-Barreiro S, López-Beceiro J et al. New approach to the double melting peak of poly(l-lactic acid) observed by DSC. J. Mater. Res. 2012;27(10): 1379–82. doi:10.1557/jmr.2012.57 Gracia-Fernández CA Gómez-Barreiro S López-Beceiro J New approach to the double melting peak of poly(l-lactic acid) observed by DSC . J. Mater. Res . 2012 ; 27 ( 10 ): 1379 – 82 . doi: 10.1557/jmr.2012.57 Open DOISearch in Google Scholar

[36] Foglia F, De Meo A, Iozzino V et al. Isothermal crystallization of PLA: Nucleation density and growth rates of α and α′ phases. Can. J. Chem. Eng. 2020;98(9): 19982007. doi:10.1002/cjce.23818 Foglia F De Meo A Iozzino V Isothermal crystallization of PLA: Nucleation density and growth rates of α and α′ phases . Can. J. Chem. Eng . 2020 ; 98 ( 9 ): 1998 – 2007 . doi: 10.1002/cjce.23818 Open DOISearch in Google Scholar

[37] Mathot VBF. Crystallization of polymers: A personal view on a lifetime in research. J. Therm. Anal. Calorim. 2010;102(2): 403–12. doi:10.1007/s10973-010-0947-x Mathot VBF. Crystallization of polymers: A personal view on a lifetime in research . J. Therm. Anal. Calorim . 2010 ; 102 ( 2 ): 403 – 12 . doi: 10.1007/s10973-010-0947-x Open DOISearch in Google Scholar