Comparative evaluation of mechanical properties of short aramid fiber on thermoplastic polymers

[1] Zhandarov S, Mäder E. Characterization of fiber/matrix interface strength: Applicability of different tests, approaches and parameters. Compos Sci Technol. 2005;65: 149–160. Zhandarov S Mäder E. Characterization of fiber/matrix interface strength: Applicability of different tests, approaches and parameters . Compos Sci Technol . 2005 ; 65 : 149 – 160 . Search in Google Scholar

[2] Al-Furjan MSH, Shan L, Shen X, et al. A review on fabrication techniques and tensile properties of glass, carbon, and kevlar fiber reinforced polymer composites. J Mater Res Technol. 2022;19: 2930–2959. Al-Furjan MSH Shan L Shen X A review on fabrication techniques and tensile properties of glass, carbon, and kevlar fiber reinforced polymer composites . J Mater Res Technol . 2022 ; 19 : 2930 – 2959 . Search in Google Scholar

[3] Sajan S, Philip Selvaraj D. A review on polymer matrix composite materials and their applications. Mater Today Proc. 2021;47: 5493–5498. Sajan S Philip Selvaraj D. A review on polymer matrix composite materials and their applications . Mater Today Proc . 2021 ; 47 : 5493 – 5498 . Search in Google Scholar

[4] Wang M, Pan Z, Wu Z, et al. Effect of carbon/Kevlar asymmetric hybridization ratio on the low-velocity impact response of plain woven laminates. Compos Struct. 2021;276: 114574. Wang M Pan Z Wu Z Effect of carbon/Kevlar asymmetric hybridization ratio on the low-velocity impact response of plain woven laminates . Compos Struct . 2021 ; 276 : 114574 . Search in Google Scholar

[5] Kalantar J, Drzal LT. The bonding mechanism of aramid fibres to epoxy matrices - Part 1 A review of the literature. J Mater Sci. 1990;25: 4186–4193. Kalantar J Drzal LT. The bonding mechanism of aramid fibres to epoxy matrices - Part 1 A review of the literature . J Mater Sci . 1990 ; 25 : 4186 – 4193 . Search in Google Scholar

[6] Muthalagu R, Murugesan J, Sathees Kumar S, et al. Tensile attributes and material analysis of kevlar and date palm fibers reinforced epoxy composites for automotive bumper applications. Mater Today Proc. 2021;46: 433–438. Muthalagu R Murugesan J Sathees Kumar S Tensile attributes and material analysis of kevlar and date palm fibers reinforced epoxy composites for automotive bumper applications . Mater Today Proc . 2021 ; 46 : 433 – 438 . Search in Google Scholar

[7] Jaiswal G, Singha MK, Das D. Mechanical behavior of aramid-polypropylene fiberweb composites. Compos Struct 2021; 268: 113938. Jaiswal G Singha MK Das D. Mechanical behavior of aramid-polypropylene fiberweb composites . Compos Struct 2021 ; 268 : 113938. Search in Google Scholar

[8] Amran M, Fediuk R, Vatin N, et al. Fibre-reinforced foamed concretes: A review. Materials (Basel) 2020; 13: 1–36. Amran M Fediuk R Vatin N Fibre-reinforced foamed concretes: A review . Materials (Basel) 2020 ; 13 : 1 – 36 . Search in Google Scholar

[9] Geo J, Yang X, Guo J, et al. Hyperelastic mechanical properties of chopped aramid fiber-reinforced rubber composite under finite strain. Compos Struct 2020; 243: 112187. Geo J Yang X Guo J Hyperelastic mechanical properties of chopped aramid fiber-reinforced rubber composite under finite strain . Compos Struct 2020 ; 243 : 112187 . Search in Google Scholar

[10] Arroyo M, Bell M. Morphology/behavior relationship and recyclability of composites based on PP/EPDM blends and short aramid fibers. J Appl Polym Sci. 2002;83: 2474–2484. Arroyo M Bell M. Morphology/behavior relationship and recyclability of composites based on PP/EPDM blends and short aramid fibers . J Appl Polym Sci . 2002 ; 83 : 2474 – 2484 . Search in Google Scholar

[11] Sarasini F, Tirillò J, Valente M, et al. Hybrid composites based on aramid and basalt woven fabrics: Impact damage modes and residual flexural properties. Mater Des. 2013;49: 290–302. Sarasini F Tirillò J Valente M Hybrid composites based on aramid and basalt woven fabrics: Impact damage modes and residual flexural properties . Mater Des . 2013 ; 49 : 290 – 302 . Search in Google Scholar

[12] Shibulal GS and Naskar K, Structurally Different Short Aramid Fiber–Reinforced Thermoplastic Polyurethane. Polymer Composites, 2014; 35(9): 1767–1778. https://doi.org/10.1002/pc.22830 Shibulal GS and Naskar K Structurally Different Short Aramid Fiber–Reinforced Thermoplastic Polyurethane . Polymer Composites 2014 ; 35 ( 9 ): 1767 – 1778 . https://doi.org/10.1002/pc.22830 Search in Google Scholar

[13] Ari A, Karahan M, Ahmed HAM, Babiker O, Dehşet RMA. A Review of Cellulosic Natural Fibers’ Properties and Their Suitability as Reinforcing Materials for Composite Panels and Applications. AATCC Journal of Research. 2023;10(3):163-183. doi:10.1177/24723444221147365 Ari A Karahan M Ahmed HAM Babiker O Dehşet RMA. A Review of Cellulosic Natural Fibers’ Properties and Their Suitability as Reinforcing Materials for Composite Panels and Applications . AATCC Journal of Research . 2023 ; 10 ( 3 ): 163 – 183 . DOI: 10.1177/24723444221147365 Open DOISearch in Google Scholar

[14] Bazan P, Nosal P, Wierzbicka-Miernik A, et al. A novel hybrid composites based on biopolyamide 10.10 with basalt/aramid fibers: Mechanical and thermal investigation. Compos Part B Eng. 223. Epub ahead of print 2021. DOI: 10.1016/j.compositesb.2021.109125. Bazan P Nosal P Wierzbicka-Miernik A A novel hybrid composites based on biopolyamide 10.10 with basalt/aramid fibers: Mechanical and thermal investigation . Compos Part B Eng . 223 . Epub ahead of print 2021. DOI: 10.1016/j.compositesb.2021.109125 . Open DOISearch in Google Scholar

[15] Vajrasthira C, Amornsakchai T, Bualek-Limcharoen S. Fiber-matrix interactions in aramid-short-fiber-reinforced thermoplastic polyurethane composites. J Appl Polym Sci. 2002;87: 1059–1067. Vajrasthira C Amornsakchai T Bualek-Limcharoen S. Fiber-matrix interactions in aramid-short-fiber-reinforced thermoplastic polyurethane composites . J Appl Polym Sci . 2002 ; 87 : 1059 – 1067 . Search in Google Scholar

[16] Siva R, Sundar Reddy Nemali S, Kishore Kunchapu S, et al. Comparison of mechanical properties and water absorption test on injection molding and extrusion - injection molding thermoplastic hemp fiber composite. Mater Today Proc. 2021;47: 4382–4386. Siva R Sundar Reddy Nemali S Kishore Kunchapu S Comparison of mechanical properties and water absorption test on injection molding and extrusion - injection molding thermoplastic hemp fiber composite . Mater Today Proc . 2021 ; 47 : 4382 – 4386 . Search in Google Scholar

[17] Crabtree SL, Spalding MA, Pavlicek CL. Single-screw extruder zone temperature selection for optimized performance. Tech Pap Reg Tech Conf - Soc Plast Eng. 2008;3: 1406–1411. Crabtree SL Spalding MA Pavlicek CL. Single-screw extruder zone temperature selection for optimized performance . Tech Pap Reg Tech Conf - Soc Plast Eng . 2008 ; 3 : 1406 – 1411 . Search in Google Scholar

[18] da Costa HM, Ramos VD, de Oliveira MG. Degradation of polypropylene (PP) during multiple extrusions: thermal analysis, mechanical properties and analysis of variance. Polym Test. 2007;26: 676–684. da Costa HM Ramos VD de Oliveira MG. Degradation of polypropylene (PP) during multiple extrusions: thermal analysis, mechanical properties and analysis of variance . Polym Test . 2007 ; 26 : 676 – 684 . Search in Google Scholar

[19] Fu SY, Lauke B, Mäder E, et al. Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites. Compos Part A Appl Sci Manuf. 2000;31: 1117–1125. Fu SY Lauke B Mäder E Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites . Compos Part A Appl Sci Manuf . 2000 ; 31 : 1117 – 1125 . Search in Google Scholar

[20] Delli E, Giliopoulos D, Bikiaris DN, et al. Fibre length and loading impact on the properties of glass fibre reinforced polypropylene random composites. Compos Struct. 263. Epub ahead of print 2021. DOI: 10.1016/j.compstruct.2021.113678. Delli E Giliopoulos D Bikiaris DN Fibre length and loading impact on the properties of glass fibre reinforced polypropylene random composites . Compos Struct . 263 . Epub ahead of print 2021. DOI: 10.1016/j.compstruct.2021.113678 . Open DOISearch in Google Scholar

[21] Savaşkan M, Taptık Y, Ürgen M. Deney tasarimi yöntemi ile matkap uçlarinda performans optimizasyonu. Itüdergisi/D. 2004;117–128. Savaşkan M Taptık Y Ürgen M. Deney tasarimi yöntemi ile matkap uçlarinda performans optimizasyonu . Itüdergisi/D . 2004 ; 117 – 128 . Search in Google Scholar

[22] Kumar S, Balachander S. Studying the effect of reinforcement parameters on the mechanical properties of natural fibre-woven composites by Taguchi method. J Ind Text. 2020;50: 133–148. Kumar S Balachander S. Studying the effect of reinforcement parameters on the mechanical properties of natural fibre-woven composites by Taguchi method . J Ind Text . 2020 ; 50 : 133 – 148 . Search in Google Scholar

[23] Özçelik B, Özbay B. Plastik Enjeksiyon Kalip Malzemelerinin Polipropilen Ürünün Mekanik Özeliklerine Etkisinin Taguchi Yöntemiyle Belirlenmesi. Sigma 29. 2011;289–300. Özçelik B Özbay B. Plastik Enjeksiyon Kalip Malzemelerinin Polipropilen Ürünün Mekanik Özeliklerine Etkisinin Taguchi Yöntemiyle Belirlenmesi . Sigma 29 . 2011 ; 289 – 300 . Search in Google Scholar

[24] Fu T, Haworth B, Mascia L. Analysis of process parameters related to the single-screw extrusion of recycled polypropylene blends by using design of experiments. J Plast Film Sheeting. 2017;33: 168–190. Fu T Haworth B Mascia L. Analysis of process parameters related to the single-screw extrusion of recycled polypropylene blends by using design of experiments . J Plast Film Sheeting . 2017 ; 33 : 168 – 190 . Search in Google Scholar

[25] Ravi Kumar N, Srikant P, Ranga Rao CH, et al. Statistical analysis of mechanical properties of vakka fiber reinforced polypropylene composites using Taguchi method. Mater Today Proc. 2017;4: 3361–3370. Ravi Kumar N Srikant P Ranga Rao CH Statistical analysis of mechanical properties of vakka fiber reinforced polypropylene composites using Taguchi method . Mater Today Proc . 2017 ; 4 : 3361 – 3370 . Search in Google Scholar

[26] Li T, Wang Z, Zhang H, et al. Non-destructive modification of aramid fiber by building nanoscale-coating solution to enhance the interfacial adhesion properties of the fiber-reinforced composites. J Compos Mater. 2021;55: 1823–1834. Li T Wang Z Zhang H Non-destructive modification of aramid fiber by building nanoscale-coating solution to enhance the interfacial adhesion properties of the fiber-reinforced composites . J Compos Mater . 2021 ; 55 : 1823 – 1834 . Search in Google Scholar

[27] Zhang B, Jia L, Tian M, et al. Surface and interface modification of aramid fiber and its reinforcement for polymer composites: a review. Eur Polym J. 2021;147: 110352. Zhang B Jia L Tian M Surface and interface modification of aramid fiber and its reinforcement for polymer composites: a review . Eur Polym J . 2021 ; 147 : 110352 . Search in Google Scholar

[28] Huang BZ, Zhao LJ. Bridging and toughening of short fibers in SMC and parametric optimum. Compos Part B Eng. 2012;43: 3146–3152. Huang BZ Zhao LJ. Bridging and toughening of short fibers in SMC and parametric optimum . Compos Part B Eng . 2012 ; 43 : 3146 – 3152 . Search in Google Scholar

[29] Wang J, Fuentes CA, Zhang D, et al. Wettability of carbon fibres at micro- and mesoscales. Carbon N Y. 2017; 120: 438–446. Wang J Fuentes CA Zhang D Wettability of carbon fibres at micro- and mesoscales . Carbon N Y . 2017 ; 120 : 438 – 446 . Search in Google Scholar

[30] Lu C, Wang J, Lu X, et al. Wettability and interfacial properties of carbon fiber and Ppoly(ether ether ketone) fiber hybrid composite. ACS Appl Mater Interfaces. 2019;11: 31520–31531. Lu C Wang J Lu X Wettability and interfacial properties of carbon fiber and Ppoly(ether ether ketone) fiber hybrid composite . ACS Appl Mater Interfaces . 2019 ; 11 : 31520 – 31531 . Search in Google Scholar

[31] Carroy A, Druene L, Garinet M, et al. Hooked on plastics - How to get your UV coating to adhere. Paint Coatings Ind. 2006;22: 46–52. Carroy A Druene L Garinet M Hooked on plastics - How to get your UV coating to adhere . Paint Coatings Ind . 2006 ; 22 : 46 – 52 . Search in Google Scholar

[32] Surface treatments improve adhesion to composites | 2017-09-21 | Assembly Magazine | ASSEMBLY [Internet]. [cited 2023 Mar 16]. https://www.assemblymag.com/articles/93987-surface-treatments-improve-adhesion-to-composites Surface treatments improve adhesion to composites | 2017 - 09 - 21 | Assembly Magazine | ASSEMBLY [Internet]. [cited 2023 Mar 16 ]. https://www.assemblymag.com/articles/93987-surface-treatments-improve-adhesion-to-composites Search in Google Scholar

[33] Surface energy of plastics, https://www.tstar.com/blog/bid/33845/surface-energy-of-plastics [Accessed 16 March 2023]. Surface energy of plastics https://www.tstar.com/blog/bid/33845/surface-energy-of-plastics [Accessed 16 March 2023 ]. Search in Google Scholar

[34] Technology: Silicone Adhesion & Bonding — News — Compo-SiL®, https://www.compo-sil.com/modules/news/article.php?storyid=57 [Accessed 16 March 2023]. Technology: Silicone Adhesion & Bonding — News — Compo-SiL® https://www.compo-sil.com/modules/news/article.php?storyid=57 [ Accessed 16 March 2023 ]. Search in Google Scholar

[35] PP BondingļPTFE Gluing ļHDPEļLDPE bond ļ Polypropylene joining, https://elixir-india.net/blog/polyeolefin-bonding/ [Accessed 16 March 2023]. PP BondingļPTFE Gluing ļHDPEļLDPE bond ļ Polypropylene joining https://elixir-india.net/blog/polyeolefin-bonding/ [Accessed 16 March 2023 ]. Search in Google Scholar

[36] Sekercioğlu T, Üniversitesi P, Fakültesi M, et al. Investigation of Surface Preparation Methods for Bonding of PlasticPlastikleriṅ Yapiştirilmasinda Yüzey HazirlamYöntemleriṅiİṅcelenmesi·. 2014;37–44. Sekercioğlu T Üniversitesi P Fakültesi M Investigation of Surface Preparation Methods for Bonding of PlasticPlastikleriṅ Yapiştirilmasinda Yüzey HazirlamYöntemleriṅiİṅcelenmesi· . 2014 ; 37 – 44 . Search in Google Scholar

[37] Biswas ma K, Shayed ma, Hund rd, et al. Surface modification of Twaron aramid fiber by the atmospheric air plasma technique. Text Res J. 2013; 83: 406–417. Biswasma K Shayedma Hundrd Surface modification of Twaron aramid fiber by the atmospheric air plasma technique . Text Res J . 2013 ; 83 : 406 – 417 . Search in Google Scholar

[38] Yuan H, Wang W, Yang D, et al. Hydrophilicity modification of aramid fiber using a linear shape plasma excited by nanosecond pulse. Surf Coatings Technol. 2018;344: 614–620. Yuan H Wang W Yang D Hydrophilicity modification of aramid fiber using a linear shape plasma excited by nanosecond pulse . Surf Coatings Technol . 2018 ; 344 : 614 – 620 . Search in Google Scholar

[39] Karahan M, Karahan N. Influence of weaving structure and hybridization on the tensile properties of woven carbon-epoxy composites. J Reinf Plast Compos. 2014;33: 212–222. Karahan M Karahan N. Influence of weaving structure and hybridization on the tensile properties of woven carbon-epoxy composites . J Reinf Plast Compos . 2014 ; 33 : 212 – 222 . Search in Google Scholar

[40] Wang C, Li KZ, Li HJ, et al. Effect of carbon fiber dispersion on the mechanical properties of carbon fiber-reinforced cement-based composites. Mater Sci Eng A. 2008;487: 52–57. Wang C Li KZ Li HJ Effect of carbon fiber dispersion on the mechanical properties of carbon fiber-reinforced cement-based composites . Mater Sci Eng A . 2008 ; 487 : 52 – 57 . Search in Google Scholar

[41] Bingöl M, Çavdar K. Effects of different reinforcements for improving mechanical properties of composite materials. Uludağ Univ J Fac Eng. 2016;21: 123. Bingöl M Çavdar K. Effects of different reinforcements for improving mechanical properties of composite materials . Uludağ Univ J Fac Eng . 2016 ; 21 : 123 . Search in Google Scholar

[42] Wang Y, Hansen CJ, Wu CC, et al. Effect of surface wettability on the interfacial adhesion of a thermosetting elastomer on glass. RSC Adv. 2021;11: 31142–31151. Wang Y Hansen CJ Wu CC Effect of surface wettability on the interfacial adhesion of a thermosetting elastomer on glass . RSC Adv . 2021 ; 11 : 31142 – 31151 . Search in Google Scholar

[43] Ari A, Bayram A, Karahan M, et al. Comparison of the mechanical properties of chopped glass, carbon, and aramid fiber reinforced polypropylene. Polym Polym Compos. 2022;30: 096739112210985. https://doi.org/10.1177/09673911221098570 Ari A Bayram A Karahan M Comparison of the mechanical properties of chopped glass, carbon, and aramid fiber reinforced polypropylene . Polym Polym Compos . 2022 ; 30 : 096739112210985 . https://doi.org/10.1177/09673911221098570 Search in Google Scholar

[44] Karahan M, Gul H, Karahan N, et al. Static behavior of three-dimensional Integrated core sandwich composites subjected to three-point bending. J Reinf Plast Compos. 2013;32: 664–678. Karahan M Gul H Karahan N Static behavior of three-dimensional Integrated core sandwich composites subjected to three-point bending . J Reinf Plast Compos . 2013 ; 32 : 664 – 678 . Search in Google Scholar

[45] Laura DM, Keskkula H, Barlow JW, et al. Effect of glass fiber and maleated ethylene-propylene rubber content on tensile and impact properties of Nylon 6. Polymer (Guildf). 2000;41: 7165–7174. Laura DM Keskkula H Barlow JW Effect of glass fiber and maleated ethylene-propylene rubber content on tensile and impact properties of Nylon 6 . Polymer (Guildf) . 2000 ; 41 : 7165 – 7174 . Search in Google Scholar

[46] Guo Q, Xiao B, Ohsawa I, et al. Fracture mechanism characteristics of ultra-thin chopped carbon fiber tape-reinforced thermoplastics hat-shaped hollow beam under transverse static and impact loadings. Carbon Lett. 2020;30: 271–280. Guo Q Xiao B Ohsawa I Fracture mechanism characteristics of ultra-thin chopped carbon fiber tape-reinforced thermoplastics hat-shaped hollow beam under transverse static and impact loadings . Carbon Lett . 2020 ; 30 : 271 – 280 . Search in Google Scholar

[47] Dorigato A, Fambri L. Effect of aramid regenerated fibers on thermo-mechanical behaviour of polyamide 12 composites. J Reinf Plast Compos. 2013;32: 1243–1256. Dorigato A Fambri L. Effect of aramid regenerated fibers on thermo-mechanical behaviour of polyamide 12 composites . J Reinf Plast Compos . 2013 ; 32 : 1243 – 1256 . Search in Google Scholar

[48] Karahan M, Karahan N. Effect of weaving structure and hybridization on the low-velocity impact behavior of woven carbon-epoxy composites. Fibres Text East Eur. 2014;105: 109–115. Karahan M Karahan N. Effect of weaving structure and hybridization on the low-velocity impact behavior of woven carbon-epoxy composites . Fibres Text East Eur . 2014 ; 105 : 109 – 115 . Search in Google Scholar

[49] Suresha B, Ravi Kumar BN, Venkataramareddy M, et al. Role of micro/nano fillers on mechanical and tribological properties of polyamide66/polypropylene composites. Mater Des. 2010;31: 1993–2000. Suresha B Ravi Kumar BN Venkataramareddy M Role of micro/nano fillers on mechanical and tribological properties of polyamide66/polypropylene composites . Mater Des . 2010 ; 31 : 1993 – 2000 . Search in Google Scholar

[50] Abasi FO, Aabass RU. Thermo-mechanical behavior of epoxy composite reinforced by carbon and Kevlar fiber. MATEC Web Conf. 2018;225: 1–8. Abasi FO Aabass RU. Thermo-mechanical behavior of epoxy composite reinforced by carbon and Kevlar fiber . MATEC Web Conf . 2018 ; 225 : 1 – 8 . Search in Google Scholar

[51] Andó M, Kalácska G, Czigány T. Shore D Hardness of Cast PA6 Based Composites. 2009;XXIII: 15–19. Andó M Kalácska G Czigány T. Shore D Hardness of Cast PA6 Based Composites . 2009 ; XXIII : 15 – 19 . Search in Google Scholar

[52] Hu C, Liao X, Qin QH, et al. The fabrication and characterization of high density polyethylene composites reinforced by carbon nanotube coated carbon fibers. Compos Part A Appl Sci Manuf. 2019;121: 149–156. Hu C Liao X Qin QH The fabrication and characterization of high density polyethylene composites reinforced by carbon nanotube coated carbon fibers . Compos Part A Appl Sci Manuf . 2019 ; 121 : 149 – 156 . Search in Google Scholar

[53] Ari A, Bayram A. High-pressure resistant aramid fiber reinforced polymer matrix composite pipe design. Hacettepe Journal of Biology and Chemistry. 2022; 50(3): 301–312. https://doi.org/10.15671/hjbc.1024810 Ari A Bayram A. High-pressure resistant aramid fiber reinforced polymer matrix composite pipe design . Hacettepe Journal of Biology and Chemistry . 2022 ; 50 ( 3 ): 301 – 312 . https://doi.org/10.15671/hjbc.1024810 Search in Google Scholar

[54] Somashekhar S, Shanthakumar GC, Nagamadhu M. Influence of fiber content and screw speed on the mechanical characterization of jute fiber reinforced polypropylene composite using Taguchi method. Mater Today Proc. 2019;24: 2366–2374. Somashekhar S Shanthakumar GC Nagamadhu M. Influence of fiber content and screw speed on the mechanical characterization of jute fiber reinforced polypropylene composite using Taguchi method . Mater Today Proc . 2019 ; 24 : 2366 – 2374 . Search in Google Scholar

[55] Manikandan A, Rajkumar R. Evaluation of mechanical properties of synthetic fiber reinforced polymer composites by mixture design analysis. Polym Polym Compos. 2016;24: 455–462. Manikandan A Rajkumar R. Evaluation of mechanical properties of synthetic fiber reinforced polymer composites by mixture design analysis . Polym Polym Compos . 2016 ; 24 : 455 – 462 . Search in Google Scholar

[56] Junaedi H, Baig M, Dawood A, et al. Modeling analysis of the tensile strength of polypropylene base short carbon fiber reinforced composites. J Mater Res Technol. 2021;11: 1611–1621. Junaedi H Baig M Dawood A Modeling analysis of the tensile strength of polypropylene base short carbon fiber reinforced composites . J Mater Res Technol . 2021 ; 11 : 1611 – 1621 . Search in Google Scholar

[57] Ari A, Bayram A, Karahan M, et al. Evaluation of the mechanical properties of chopped carbon fibre reinforced polypropylene, polyethylene, polyamide 6, and polyamide 12 composites, In: Industria Textila, 2023; 74(2): 175–183. http://doi.org/10.35530/IT.074.02.202214 Ari A Bayram A Karahan M Evaluation of the mechanical properties of chopped carbon fibre reinforced polypropylene, polyethylene, polyamide 6, and polyamide 12 composites , In: Industria Textila 2023 ; 74 ( 2 ): 175 – 183 . http://doi.org/10.35530/IT.074.02.202214 Search in Google Scholar