Logowanie
Zarejestruj się
Zresetuj hasło
Publikuj i Dystrybuuj
Rozwiązania Wydawnicze
Rozwiązania Dystrybucyjne
Dziedziny
Architektura i projektowanie
Bibliotekoznawstwo i bibliologia
Biznes i ekonomia
Chemia
Chemia przemysłowa
Filozofia
Fizyka
Historia
Informatyka
Inżynieria
Inżynieria materiałowa
Językoznawstwo i semiotyka
Kulturoznawstwo
Literatura
Matematyka
Medycyna
Muzyka
Nauki farmaceutyczne
Nauki klasyczne i starożytne studia bliskowschodnie
Nauki o Ziemi
Nauki o organizmach żywych
Nauki społeczne
Prawo
Sport i rekreacja
Studia judaistyczne
Sztuka
Teologia i religia
Zagadnienia ogólne
Publikacje
Czasopisma
Książki
Materiały konferencyjne
Wydawcy
Blog
Kontakt
Wyszukiwanie
EUR
USD
GBP
Polski
English
Deutsch
Polski
Español
Français
Italiano
Koszyk
Home
Czasopisma
Materials Science-Poland
Tom 40 (2022): Zeszyt 4 (December 2022)
Otwarty dostęp
Microplasma spraying of hydroxyapatite coatings on additive manufacturing titanium implants with trabecular structures
Albina Kadyroldina
Albina Kadyroldina
,
Darya Alontseva
Darya Alontseva
,
Sergey Voinarovych
Sergey Voinarovych
,
Leszek Łatka
Leszek Łatka
,
Oleksandr Kyslytsia
Oleksandr Kyslytsia
,
Bagdat Azamatov
Bagdat Azamatov
,
Aleksandr Khozhanov
Aleksandr Khozhanov
,
Nadezhda Prokhorenkova
Nadezhda Prokhorenkova
,
Almira Zhilkashinova
Almira Zhilkashinova
oraz
Svitlana Burburska
Svitlana Burburska
| 06 mar 2023
Materials Science-Poland
Tom 40 (2022): Zeszyt 4 (December 2022)
O artykule
Poprzedni artykuł
Następny artykuł
Abstrakt
Artykuł
Ilustracje i tabele
Referencje
Autorzy
Artykuły w tym zeszycie
Podgląd
PDF
Zacytuj
Udostępnij
Data publikacji:
06 mar 2023
Zakres stron:
28 - 42
Otrzymano:
23 lis 2022
Przyjęty:
17 sty 2023
DOI:
https://doi.org/10.2478/msp-2022-0043
Słowa kluczowe
additive manufacturing (AM)
,
implants
,
trabecular surface
,
microplasma spraying (MPS)
,
selective laser melting (SLM)
,
hydroxyapatite (HA)
© 2023 Albina Kadyroldina et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Fig. 1
Specimens of titanium trabecular substrates: detail of the endoprosthesis of the intervertebral disk (A); honeycomb structure (B)
Fig. 2
Schematic representation (with dimensions in centimeters) of the assembled test assembly for testing the adhesion strength of coatings to a substrate: 1 — specimen No. 1; 2 - sprayed coating; 3 - a layer of adhesive bonding agent (a layer of glue); 4 – specimen No. 2
Fig. 3
Results of automated analysis with a color map of the deviations of a real specimen with a honeycomb structure from its stereolithographic (stl) model (A); visualization of the distribution of pores on a translucent three-dimensional model (B)
Fig. 4
Results of automated analysis of the porosity of a specimen with a honeycomb structure; the arrows indicate the largest defect found at the indicated point
Fig. 5
Results of statistics on the analysis of the porosity (number of pores by volume) of a specimen with a honeycomb structure; statistics circled in red frame
Fig. 6
Results of automated analysis with a color map of deviations of a real part of the endoprosthesis from the stereolithographic (stl) model (A); the largest defect found (B)
Fig. 7
Results of statistics on porosity analysis (number of pores by volume) for the part of the endoprosthesis; statistics circled in red frame
Fig. 8
HA powder feedstock: SEM image of HA particles indicating particle size (A); TEM image of the HA powder particle with the corresponding indexed microelectron diffraction pattern with zone axis [011] (B); XRD pattern of HA powder (C). SEM, scanning electron microscopy; TEM, transmission electron microscopy; XRD, X-ray diffraction
Fig. 9
HA-coating: SEM image of HA coating on a titanium trabecular 3D-printed substrate (A) and XRD pattern of microplasma-sprayed HA coating (B).HA, hydroxyapatite; SEM, scanning electron microscopy; TCP, tricalcium phosphate; XRD, X-ray diffraction
Fig. 10
Specimens of 3D-printed titanium substrates with HA microplasma coating before (A) and after (B) tensile adhesion tests. HA, hydroxyapatite
Chemical composition of Ti6Al4V titanium alloy (powder) according to ISO 5832-3
Element
Wt.% of element
Fe
<0.3
N
<0.05
O
<0.2
Al
5.5–6.75
C
<0.08
V
3.5–4.5
H
<0.015
Ti
Balance
Podgląd