Accès libre

Microplasma spraying of hydroxyapatite coatings on additive manufacturing titanium implants with trabecular structures

Albina Kadyroldina

Albina Kadyroldina

School of Information Technologies and Intelligent Systems, D. Serikbayev East Kazakhstan Technical UniversityUst-Kamenogorsk, Kazakhstan
Recherchez cet auteur sur
Sciendo|Google Scholar
Kadyroldina, Albina
, 
Darya Alontseva

Darya Alontseva

School of Information Technologies and Intelligent Systems, D. Serikbayev East Kazakhstan Technical UniversityUst-Kamenogorsk, Kazakhstan
Recherchez cet auteur sur
Sciendo|Google Scholar
Alontseva, Darya
, 
Sergey Voinarovych

Sergey Voinarovych

Department of Protective Coatings, E.O. Paton Electric Welding Institute, National Academy of Sciences of Ukraine, Department of Protective CoatingsKyiv, Ukraine
Recherchez cet auteur sur
Sciendo|Google Scholar
Voinarovych, Sergey
, 
Leszek Łatka

Leszek Łatka

Department of Metal Forming, Welding and Metrology, Faculty of Mechanical Engineering, University of Science and TechnologyWrocław, Poland
Recherchez cet auteur sur
Sciendo|Google Scholar
Łatka, Leszek
, 
Oleksandr Kyslytsia

Oleksandr Kyslytsia

Department of Protective Coatings, E.O. Paton Electric Welding Institute, National Academy of Sciences of Ukraine, Department of Protective CoatingsKyiv, Ukraine
Recherchez cet auteur sur
Sciendo|Google Scholar
Kyslytsia, Oleksandr
, 
Bagdat Azamatov

Bagdat Azamatov

School of Information Technologies and Intelligent Systems, D. Serikbayev East Kazakhstan Technical UniversityUst-Kamenogorsk, Kazakhstan
Recherchez cet auteur sur
Sciendo|Google Scholar
Azamatov, Bagdat
, 
Aleksandr Khozhanov

Aleksandr Khozhanov

School of Information Technologies and Intelligent Systems, D. Serikbayev East Kazakhstan Technical UniversityUst-Kamenogorsk, Kazakhstan
Recherchez cet auteur sur
Sciendo|Google Scholar
Khozhanov, Aleksandr
, 
Nadezhda Prokhorenkova

Nadezhda Prokhorenkova

School of Information Technologies and Intelligent Systems, D. Serikbayev East Kazakhstan Technical UniversityUst-Kamenogorsk, Kazakhstan
Recherchez cet auteur sur
Sciendo|Google Scholar
Prokhorenkova, Nadezhda
, 
Almira Zhilkashinova

Almira Zhilkashinova

School of Information Technologies and Intelligent Systems, D. Serikbayev East Kazakhstan Technical UniversityUst-Kamenogorsk, Kazakhstan
Recherchez cet auteur sur
Sciendo|Google Scholar
Zhilkashinova, Almira
 et 
Svitlana Burburska

Svitlana Burburska

Osteonica LLCLviv, Ukraine
Recherchez cet auteur sur
Sciendo|Google Scholar
Burburska, Svitlana
  
06 mars 2023
Microplasma spraying of hydroxyapatite coatings on additive manufacturing titanium implants with trabecular structures's Cover Image
À propos de cet article
Article précédent
Article suivant
Citez
Télécharger la couverture
Publié en ligne: 06 mars 2023
Pages: 28 - 42
Reçu: 23 nov. 2022
Accepté: 17 janv. 2023
DOI: https://doi.org/10.2478/msp-2022-0043
Mots clés
© 2023 Albina Kadyroldina et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Fig. 1

Specimens of titanium trabecular substrates: detail of the endoprosthesis of the intervertebral disk (A); honeycomb structure (B)
Specimens of titanium trabecular substrates: detail of the endoprosthesis of the intervertebral disk (A); honeycomb structure (B)

Fig. 2

Schematic representation (with dimensions in centimeters) of the assembled test assembly for testing the adhesion strength of coatings to a substrate: 1 — specimen No. 1; 2 - sprayed coating; 3 - a layer of adhesive bonding agent (a layer of glue); 4 – specimen No. 2
Schematic representation (with dimensions in centimeters) of the assembled test assembly for testing the adhesion strength of coatings to a substrate: 1 — specimen No. 1; 2 - sprayed coating; 3 - a layer of adhesive bonding agent (a layer of glue); 4 – specimen No. 2

Fig. 3

Results of automated analysis with a color map of the deviations of a real specimen with a honeycomb structure from its stereolithographic (stl) model (A); visualization of the distribution of pores on a translucent three-dimensional model (B)
Results of automated analysis with a color map of the deviations of a real specimen with a honeycomb structure from its stereolithographic (stl) model (A); visualization of the distribution of pores on a translucent three-dimensional model (B)

Fig. 4

Results of automated analysis of the porosity of a specimen with a honeycomb structure; the arrows indicate the largest defect found at the indicated point
Results of automated analysis of the porosity of a specimen with a honeycomb structure; the arrows indicate the largest defect found at the indicated point

Fig. 5

Results of statistics on the analysis of the porosity (number of pores by volume) of a specimen with a honeycomb structure; statistics circled in red frame
Results of statistics on the analysis of the porosity (number of pores by volume) of a specimen with a honeycomb structure; statistics circled in red frame

Fig. 6

Results of automated analysis with a color map of deviations of a real part of the endoprosthesis from the stereolithographic (stl) model (A); the largest defect found (B)
Results of automated analysis with a color map of deviations of a real part of the endoprosthesis from the stereolithographic (stl) model (A); the largest defect found (B)

Fig. 7

Results of statistics on porosity analysis (number of pores by volume) for the part of the endoprosthesis; statistics circled in red frame
Results of statistics on porosity analysis (number of pores by volume) for the part of the endoprosthesis; statistics circled in red frame

Fig. 8

HA powder feedstock: SEM image of HA particles indicating particle size (A); TEM image of the HA powder particle with the corresponding indexed microelectron diffraction pattern with zone axis [011] (B); XRD pattern of HA powder (C). SEM, scanning electron microscopy; TEM, transmission electron microscopy; XRD, X-ray diffraction
HA powder feedstock: SEM image of HA particles indicating particle size (A); TEM image of the HA powder particle with the corresponding indexed microelectron diffraction pattern with zone axis [011] (B); XRD pattern of HA powder (C). SEM, scanning electron microscopy; TEM, transmission electron microscopy; XRD, X-ray diffraction

Fig. 9

HA-coating: SEM image of HA coating on a titanium trabecular 3D-printed substrate (A) and XRD pattern of microplasma-sprayed HA coating (B).HA, hydroxyapatite; SEM, scanning electron microscopy; TCP, tricalcium phosphate; XRD, X-ray diffraction
HA-coating: SEM image of HA coating on a titanium trabecular 3D-printed substrate (A) and XRD pattern of microplasma-sprayed HA coating (B).HA, hydroxyapatite; SEM, scanning electron microscopy; TCP, tricalcium phosphate; XRD, X-ray diffraction

Fig. 10

Specimens of 3D-printed titanium substrates with HA microplasma coating before (A) and after (B) tensile adhesion tests. HA, hydroxyapatite
Specimens of 3D-printed titanium substrates with HA microplasma coating before (A) and after (B) tensile adhesion tests. HA, hydroxyapatite

Chemical composition of Ti6Al4V titanium alloy (powder) according to ISO 5832-3

Element Wt.% of element
Fe <0.3
N <0.05
O <0.2
Al 5.5–6.75
C <0.08
V 3.5–4.5
H <0.015
Ti Balance
Langue:
Anglais
Périodicité:
4 fois par an
Sujets de la revue:
Sciences des matériaux, Sciences des matériaux, autres, Nanomatériaux, Matériaux fonctionnels et intelligents, Caractérisation et propriétés des matériaux
RSS Feed de la revue