<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The article presents the research in the field of production of metal–matrix composite coatings using laser cladding technology. The general purpose of producing composite coatings is the improvement of wear resistance of the material surface. In this research, Inconel 625 was used as a matrix material. Nickel-based superalloys are used in several industries for unique applications because they possess a number of beneficial properties including high tensile and fatigue strengths and resistance to high-temperature corrosion in aggressive environments. However, for some applications, this alloy shows insufficient wear resistance of the surface; therefore, for the tests, Inconel 625-based composite coatings were produced with the addition of 10 vol.%, 20 vol.%, and 40 vol.% of titanium carbide (TiC) particles as reinforcement. In general, the addition of TiC particles had a positive effect on the erosion resistance of the surface. The aim of the current research was to test the influence of TiC particle reinforcement of Inconel 625 laser-cladded coatings on corrosion resistance of the surface. For the tests, the laser-cladded composite coatings with uniform phase distribution were produced. The proceeded tests included penetrant tests, macrostructure and microstructure analysis, X-ray diffraction (XRD), and microhardness and corrosion resistance tests. The results showed that using laser cladding, TiC-reinforced Inconel 625 uniform composite coatings may be produced. The addition of TiC particles caused microstructure changes in the Inconel 625 matrix and an increase in hardness. The addition of TiC particles had a negative influence on Inconel 625 corrosion resistance, but with the increased composite coating homogeneity, the corrosion resistance improved.</p>
</abstract>

The article presents the research in the field of production of metal–matrix composite coatings using laser cladding technology. The general purpose of producing composite coatings is the improvement of wear resistance of the material surface. In this research, Inconel 625 was used as a matrix material. Nickel-based superalloys are used in several industries for unique applications because they possess a number of beneficial properties including high tensile and fatigue strengths and resistance to high-temperature corrosion in aggressive environments. However, for some applications, this alloy shows insufficient wear resistance of the surface; therefore, for the tests, Inconel 625-based composite coatings were produced with the addition of 10 vol.%, 20 vol.%, and 40 vol.% of titanium carbide (TiC) particles as reinforcement. In general, the addition of TiC particles had a positive effect on the erosion resistance of the surface. The aim of the current research was to test the influence of TiC particle reinforcement of Inconel 625 laser-cladded coatings on corrosion resistance of the surface. For the tests, the laser-cladded composite coatings with uniform phase distribution were produced. The proceeded tests included penetrant tests, macrostructure and microstructure analysis, X-ray diffraction (XRD), and microhardness and corrosion resistance tests. The results showed that using laser cladding, TiC-reinforced Inconel 625 uniform composite coatings may be produced. The addition of TiC particles caused microstructure changes in the Inconel 625 matrix and an increase in hardness. The addition of TiC particles had a negative influence on Inconel 625 corrosion resistance, but with the increased composite coating homogeneity, the corrosion resistance improved.

The structure and properties of laser-cladded Inconel 625/TiC composite coatings

Welding Department, Faculty of Mechanical Engineering

Materials Science-Poland

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"The structure and properties of laser-cladded Inconel 625/TiC composite coatings"}

The article presents the research in the field of production of metal–matrix composite coatings using laser cladding technology. The general purpose of...

The structure and properties of laser-cladded Inconel 625/TiC composite coatings

Data publikacji: 10 kwi 2023

Zakres stron: 91 - 103

Otrzymano: 12 lip 2022

Przyjęty: 16 sie 2022

DOI: https://doi.org/10.2478/msp-2022-0026

Słowa kluczowe
composite coatings, nickel-based superalloys, laser cladding

© 2022 Aleksandra Lont et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The structure and properties of laser-cladded Inconel 625/TiC composite coatings

Data publikacji: 10 kwi 2023

Zakres stron: 91 - 103

Otrzymano: 12 lip 2022

Przyjęty: 16 sie 2022

DOI: https://doi.org/10.2478/msp-2022-0026

Słowa kluczowecomposite coatings, nickel-based superalloys, laser cladding

© 2022 Aleksandra Lont et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Słowa kluczowe
composite coatings, nickel-based superalloys, laser cladding