This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Thomas WM, Nicholas ED, Needham JC, Murch MG, Temple-Smith P, Dawes CJ. Friction welding. 1995.ThomasWMNicholasEDNeedhamJCMurchMGTemple-SmithPDawesCJ1995Search in Google Scholar
Abdulla F, Irawan Y, Darmadi D, Azzawiya Oil Refining Company, Brawijaya U. Tensile strength and Macro-microstructures of A6061 CDFW weld joint influenced by pressure and holding time in the upset stage. J Rekayasa Mesin. 2018; 9:149–54; https://doi.org/10.21776/ub.jrm.2018.009.02.12.AbdullaFIrawanYDarmadiDAzzawiya Oil Refining CompanyBrawijayaUTensile strength and Macro-microstructures of A6061 CDFW weld joint influenced by pressure and holding time in the upset stage2018914954https://doi.org/10.21776/ub.jrm.2018.009.02.12.10.21776/ub.jrm.2018.009.02.12Search in Google Scholar
D’Urso G, Longo M, Giardini C. Microstructure and mechanical properties of Friction Stir Welded AA6060-T6 tubes. Current State-Of-The-Art on Material Forming: Numerical and Experimental Approaches at Different Length-Scales, Pts 1–3. 2013;554–557:977–84; https://doi.org/10.4028/www.scientific.net/KEM.554-557.977.D’UrsoGLongoMGiardiniCMicrostructure and mechanical properties of Friction Stir Welded AA6060-T6 tubes2013554–55797784https://doi.org/10.4028/www.scientific.net/KEM.554-557.977.10.4028/www.scientific.net/KEM.554-557.977Search in Google Scholar
Li X, Li J, Jin F, Xiong J, Zhang F. Effect of rotational speed on friction behavior of rotary friction welding of AA6061-T6 aluminum alloy. Weld World. 2018; 62:923–30; https://doi.org/10.1007/s40194-018-0601-y.LiXLiJJinFXiongJZhangFEffect of rotational speed on friction behavior of rotary friction welding of AA6061-T6 aluminum alloy20186292330https://doi.org/10.1007/s40194-018-0601-y.10.1007/s40194-018-0601-ySearch in Google Scholar
Tashkandi MA, Mohamed MI. Effect of friction time on the mechanical and microstructural properties of AA6061 joints by continuous drive friction welding. Eng Technol Appl Sci Res. 2020; 10:5596–602; https://doi.org/10.48084/etasr.3438.TashkandiMAMohamedMIEffect of friction time on the mechanical and microstructural properties of AA6061 joints by continuous drive friction welding2020105596602https://doi.org/10.48084/etasr.3438.10.48084/etasr.3438Search in Google Scholar
Yilbas BS, Sahin AZ, Coban A, Abdul Aleem BJ. Investigation into the properties of friction-welded aluminium bars. J Mater Process Technol. 1995; 54:76–81; https://doi.org/10.1016/0924-0136(95)01923-5.YilbasBSSahinAZCobanAAbdul AleemBJInvestigation into the properties of friction-welded aluminium bars1995547681https://doi.org/10.1016/0924-0136(95)01923-5.10.1016/0924-0136(95)01923-5Search in Google Scholar
Sahin M. Joining of stainless-steel and aluminium materials by friction welding. Int J Adv Manuf Technol. 2009; 41:487–97; https://doi.org/10.1007/s00170-008-1492-7.SahinMJoining of stainless-steel and aluminium materials by friction welding20094148797https://doi.org/10.1007/s00170-008-1492-7.10.1007/s00170-008-1492-7Search in Google Scholar
Reddy MG, Rao SA, Mohandas T. Role of electro-plated interlayer in continuous drive friction welding of AA6061 to AISI 304 dissimilar metals. Sci Technol Weld Joining. 2008; 13:619–28; https://doi.org/10.1179/174329308x319217.ReddyMGRaoSAMohandasTRole of electro-plated interlayer in continuous drive friction welding of AA6061 to AISI 304 dissimilar metals20081361928https://doi.org/10.1179/174329308x319217.10.1179/174329308X319217Search in Google Scholar
Hincapi OD, Salazar JA, Restrepo JJ, Torres EA, Graciano-Uribe JA. Weldability of aluminum-steel joints using continuous drive friction welding process, without the presence of intermetallic compounds. Eng J. 2020; 24:129–44; https://doi.org/10.4186/ej.2020.24.1.129.HincapiODSalazarJARestrepoJJTorresEAGraciano-UribeJAWeldability of aluminum-steel joints using continuous drive friction welding process, without the presence of intermetallic compounds20202412944https://doi.org/10.4186/ej.2020.24.1.129.10.4186/ej.2020.24.1.129Search in Google Scholar
Adalarasan R, Santhanakumar M, Sundaram AS. Investigation in solid-state joining of Al/SiC/Al2O3 composite using Grey-based desirability (GBD) and response surface plots. J Chin Inst Eng. 2017; 40:55–65; https://doi.org/10.1080/02533839.2016.1271287.AdalarasanRSanthanakumarMSundaramASInvestigation in solid-state joining of Al/SiC/Al2O3 composite using Grey-based desirability (GBD) and response surface plots2017405565https://doi.org/10.1080/02533839.2016.1271287.10.1080/02533839.2016.1271287Search in Google Scholar
Celik S, Gunes D. Continuous drive friction welding of AI/SiC composite and AISI 1030. Welding J. 2012; 91:222S–8S.CelikSGunesDContinuous drive friction welding of AI/SiC composite and AISI 1030201291222S8SSearch in Google Scholar
Senthilkumar J, Suresh Mohan Kumar P, Balasubramanian V. Post weld heat treatment of continuous drive friction welded AA6061/SiC/graphite hybrid composites-an investigation. 2019. Mater. Res. Express.; 6(12), 1265e1; https//doi.org/10.1088/2053-1591/ab6407.SenthilkumarJSuresh Mohan KumarPBalasubramanianVPost weld heat treatment of continuous drive friction welded AA6061/SiC/graphite hybrid composites-an investigation20196121265e1https//doi.org/10.1088/2053-1591/ab6407.10.1088/2053-1591/ab6407Search in Google Scholar
Gao J, Li C, Shilpakar U, Shen Y. Improvements of mechanical properties in dissimilar joints of HDPE and ABS via carbon nanotubes during friction stir welding process. Mater Des. 2015; 86:289–96; https://doi.org/10.1016/j.matdes.2015.07.095.GaoJLiCShilpakarUShenYImprovements of mechanical properties in dissimilar joints of HDPE and ABS via carbon nanotubes during friction stir welding process20158628996https://doi.org/10.1016/j.matdes.2015.07.095.10.1016/j.matdes.2015.07.095Search in Google Scholar
Mustapha K, Abdessamad B, Azzeddine B, Mokhtar Z. Experimental investigation of friction stir welding process on high-density polyethylene. J Fail Anal Preven. 2020; 20:590–6; https://doi.org/10.1007/s11668-020-00867-0.MustaphaKAbdessamadBAzzeddineBMokhtarZExperimental investigation of friction stir welding process on high-density polyethylene2020205906https://doi.org/10.1007/s11668-020-00867-0.10.1007/s11668-020-00867-0Search in Google Scholar
Rehman RU, Sheikh-Ahmad J, Deveci S. Effect of preheating on joint quality in the friction stir welding of bimodal high density polyethylene. Int J Adv Manuf Technol. 2021; 117:1–14; https://doi.org/10.1007/s00170-021-07740-w.RehmanRUSheikh-AhmadJDeveciSEffect of preheating on joint quality in the friction stir welding of bimodal high density polyethylene2021117114https://doi.org/10.1007/s00170-021-07740-w.10.1007/s00170-021-07740-wSearch in Google Scholar
Kaddour H, Hadj Miloud M, El Bahri OC, Abdallah L. Mechanical behavior analysis of a friction stir welding (FSW) for welded joint applied to polymer materials: mechanical behavior analysis of a friction stir welding (FSW) for welded joint applied to polymer materials. Frattura ed Integrita Strutturale. 2019; 13:459–67; https://doi.org/10.3221/IGF-ESIS.47.36.KaddourHHadj MiloudMEl BahriOCAbdallahLMechanical behavior analysis of a friction stir welding (FSW) for welded joint applied to polymer materials: mechanical behavior analysis of a friction stir welding (FSW) for welded joint applied to polymer materials20191345967https://doi.org/10.3221/IGF-ESIS.47.36.10.3221/IGF-ESIS.47.36Search in Google Scholar
Paoletti A, Lambiase F, Di Ilio A. Analysis of forces and temperatures in friction spot stir welding of thermoplastic polymers: analysis of forces and temperatures in friction spot stir welding of thermoplastic polymers. Int J Adv Manuf Technol. 2016; 83:1395–407; https://doi.org/10.1007/s00170-015-7669-y.PaolettiALambiaseFDi IlioAAnalysis of forces and temperatures in friction spot stir welding of thermoplastic polymers: analysis of forces and temperatures in friction spot stir welding of thermoplastic polymers2016831395407https://doi.org/10.1007/s00170-015-7669-y.10.1007/s00170-015-7669-ySearch in Google Scholar
Hasegawaa M, Asadab T, Ozawa Y. Study of friction welding of polyethylene. Welding Int. 2002; 16:537–43.HasegawaaMAsadabTOzawaYStudy of friction welding of polyethylene2002165374310.1080/09507110209549572Search in Google Scholar
Hasegawaa M, Yamaguchib Y, Uminob A, Furukawaa Y, Asadab T, Ozawa Y. Development of joining method of polyethylene branch pipe for gas and non-excavation construction method. Welding Int. 2015; 29:279–84.HasegawaaMYamaguchibYUminobAFurukawaaYAsadabTOzawaYDevelopment of joining method of polyethylene branch pipe for gas and non-excavation construction method2015292798410.1080/09507116.2014.921048Search in Google Scholar
Kalsi NS, Sharma VS. A statistical analysis of rotary friction welding of steel with varying carbon in work-pieces. Int J Adv Manuf Technol. 2011; 57:957–67; https://doi.org/10.1007/s00170-011-3361-z.KalsiNSSharmaVSA statistical analysis of rotary friction welding of steel with varying carbon in work-pieces20115795767https://doi.org/10.1007/s00170-011-3361-z.10.1007/s00170-011-3361-zSearch in Google Scholar
Ramalingam A, Muthuvel S. Identification of optimal condition for solid state welding of Al/SiCp composite using Taguchi principles integrated TOPSIS (TPIT) method. Int J Manuf Mater Mech Eng. 2017; 7:19–37; https://doi.org/10.4018/IJMMME.2017040102.RamalingamAMuthuvelSIdentification of optimal condition for solid state welding of Al/SiCp composite using Taguchi principles integrated TOPSIS (TPIT) method201771937https://doi.org/10.4018/IJMMME.2017040102.10.4018/IJMMME.2017040102Search in Google Scholar
Singh KJ. Multi-objective optimization of high carbon steel (EN-31) and low carbon steel (SAE-1020) using Grey Taguchi method in rotary friction stir welding. Grey Syst Theory Appl. 2019; 9:385.SinghKJMulti-objective optimization of high carbon steel (EN-31) and low carbon steel (SAE-1020) using Grey Taguchi method in rotary friction stir welding2019938510.1108/GS-10-2018-0047Search in Google Scholar
Thakare KA, Vishwakarma HG, Bhave A. Experimental investigation of possible use of HDPE as thermal storage material in thermal storage type solar cookers. Int J Res Eng Technol. 2015; 4:92–9.ThakareKAVishwakarmaHGBhaveAExperimental investigation of possible use of HDPE as thermal storage material in thermal storage type solar cookers2015492910.15623/ijret.2015.0412019Search in Google Scholar
ASTM D638-14. Standard test method for tensile properties of plastics. 10th ed. West Conshohocken, PA, USA: ASTM International; 2014.ASTM D638-1410th ed.West Conshohocken, PA, USAASTM International2014Search in Google Scholar
Can A, Sahin M, Kucuk M. Modeling of friction welding. International Scientific Conference (UNITEC 10), Gabrovo, 19–20 November 2010.CanASahinMKucukMInternational Scientific Conference (UNITEC 10)Gabrovo19–20 November 2010Search in Google Scholar
Maalekian, M. Friction welding critical assessment of literature. Sci Technol Welding Joining. 2007; 12:738–59; https://doi.org/10.1179/174329307x249333.MaalekianMFriction welding critical assessment of literature20071273859https://doi.org/10.1179/174329307x249333.10.1179/174329307X249333Search in Google Scholar