Optimization of joining HDPE rods by continuous drive friction welding

[1] Thomas WM, Nicholas ED, Needham JC, Murch MG, Temple-Smith P, Dawes CJ. Friction welding. 1995. ThomasWM NicholasED NeedhamJC MurchMG Temple-SmithP DawesCJ Friction welding 1995 Search in Google Scholar

[2] Abdulla F, Irawan Y, Darmadi D, Azzawiya Oil Refining Company, Brawijaya U. Tensile strength and Macro-microstructures of A6061 CDFW weld joint influenced by pressure and holding time in the upset stage. J Rekayasa Mesin. 2018; 9:149–54; https://doi.org/10.21776/ub.jrm.2018.009.02.12. AbdullaF IrawanY DarmadiD Azzawiya Oil Refining Company BrawijayaU Tensile strength and Macro-microstructures of A6061 CDFW weld joint influenced by pressure and holding time in the upset stage J Rekayasa Mesin 2018 9 149 54 https://doi.org/10.21776/ub.jrm.2018.009.02.12. 10.21776/ub.jrm.2018.009.02.12 Search in Google Scholar

[3] D’Urso G, Longo M, Giardini C. Microstructure and mechanical properties of Friction Stir Welded AA6060-T6 tubes. Current State-Of-The-Art on Material Forming: Numerical and Experimental Approaches at Different Length-Scales, Pts 1–3. 2013;554–557:977–84; https://doi.org/10.4028/www.scientific.net/KEM.554-557.977. D’UrsoG LongoM GiardiniC Microstructure and mechanical properties of Friction Stir Welded AA6060-T6 tubes Current State-Of-The-Art on Material Forming: Numerical and Experimental Approaches at Different Length-Scales, Pts 1–3 2013 554–557 977 84 https://doi.org/10.4028/www.scientific.net/KEM.554-557.977. 10.4028/www.scientific.net/KEM.554-557.977 Search in Google Scholar

[4] Li X, Li J, Jin F, Xiong J, Zhang F. Effect of rotational speed on friction behavior of rotary friction welding of AA6061-T6 aluminum alloy. Weld World. 2018; 62:923–30; https://doi.org/10.1007/s40194-018-0601-y. LiX LiJ JinF XiongJ ZhangF Effect of rotational speed on friction behavior of rotary friction welding of AA6061-T6 aluminum alloy Weld World 2018 62 923 30 https://doi.org/10.1007/s40194-018-0601-y. 10.1007/s40194-018-0601-y Search in Google Scholar

[5] Tashkandi MA, Mohamed MI. Effect of friction time on the mechanical and microstructural properties of AA6061 joints by continuous drive friction welding. Eng Technol Appl Sci Res. 2020; 10:5596–602; https://doi.org/10.48084/etasr.3438. TashkandiMA MohamedMI Effect of friction time on the mechanical and microstructural properties of AA6061 joints by continuous drive friction welding Eng Technol Appl Sci Res 2020 10 5596 602 https://doi.org/10.48084/etasr.3438. 10.48084/etasr.3438 Search in Google Scholar

[6] Yilbas BS, Sahin AZ, Coban A, Abdul Aleem BJ. Investigation into the properties of friction-welded aluminium bars. J Mater Process Technol. 1995; 54:76–81; https://doi.org/10.1016/0924-0136(95)01923-5. YilbasBS SahinAZ CobanA Abdul AleemBJ Investigation into the properties of friction-welded aluminium bars J Mater Process Technol 1995 54 76 81 https://doi.org/10.1016/0924-0136(95)01923-5. 10.1016/0924-0136(95)01923-5 Search in Google Scholar

[7] Sahin M. Joining of stainless-steel and aluminium materials by friction welding. Int J Adv Manuf Technol. 2009; 41:487–97; https://doi.org/10.1007/s00170-008-1492-7. SahinM Joining of stainless-steel and aluminium materials by friction welding Int J Adv Manuf Technol 2009 41 487 97 https://doi.org/10.1007/s00170-008-1492-7. 10.1007/s00170-008-1492-7 Search in Google Scholar

[8] Reddy MG, Rao SA, Mohandas T. Role of electro-plated interlayer in continuous drive friction welding of AA6061 to AISI 304 dissimilar metals. Sci Technol Weld Joining. 2008; 13:619–28; https://doi.org/10.1179/174329308x319217. ReddyMG RaoSA MohandasT Role of electro-plated interlayer in continuous drive friction welding of AA6061 to AISI 304 dissimilar metals Sci Technol Weld Joining 2008 13 619 28 https://doi.org/10.1179/174329308x319217. 10.1179/174329308X319217 Search in Google Scholar

[9] Hincapi OD, Salazar JA, Restrepo JJ, Torres EA, Graciano-Uribe JA. Weldability of aluminum-steel joints using continuous drive friction welding process, without the presence of intermetallic compounds. Eng J. 2020; 24:129–44; https://doi.org/10.4186/ej.2020.24.1.129. HincapiOD SalazarJA RestrepoJJ TorresEA Graciano-UribeJA Weldability of aluminum-steel joints using continuous drive friction welding process, without the presence of intermetallic compounds Eng J 2020 24 129 44 https://doi.org/10.4186/ej.2020.24.1.129. 10.4186/ej.2020.24.1.129 Search in Google Scholar

[10] Adalarasan R, Santhanakumar M, Sundaram AS. Investigation in solid-state joining of Al/SiC/Al₂O₃ composite using Grey-based desirability (GBD) and response surface plots. J Chin Inst Eng. 2017; 40:55–65; https://doi.org/10.1080/02533839.2016.1271287. AdalarasanR SanthanakumarM SundaramAS Investigation in solid-state joining of Al/SiC/Al₂O₃ composite using Grey-based desirability (GBD) and response surface plots J Chin Inst Eng 2017 40 55 65 https://doi.org/10.1080/02533839.2016.1271287. 10.1080/02533839.2016.1271287 Search in Google Scholar

[11] Celik S, Gunes D. Continuous drive friction welding of AI/SiC composite and AISI 1030. Welding J. 2012; 91:222S–8S. CelikS GunesD Continuous drive friction welding of AI/SiC composite and AISI 1030 Welding J 2012 91 222S 8S Search in Google Scholar

[12] Senthilkumar J, Suresh Mohan Kumar P, Balasubramanian V. Post weld heat treatment of continuous drive friction welded AA6061/SiC/graphite hybrid composites-an investigation. 2019. Mater. Res. Express.; 6(12), 1265e1; https//doi.org/10.1088/2053-1591/ab6407. SenthilkumarJ Suresh Mohan KumarP BalasubramanianV Post weld heat treatment of continuous drive friction welded AA6061/SiC/graphite hybrid composites-an investigation 2019 Mater. Res. Express. 6 12 1265e1 https//doi.org/10.1088/2053-1591/ab6407. 10.1088/2053-1591/ab6407 Search in Google Scholar

[13] Gao J, Li C, Shilpakar U, Shen Y. Improvements of mechanical properties in dissimilar joints of HDPE and ABS via carbon nanotubes during friction stir welding process. Mater Des. 2015; 86:289–96; https://doi.org/10.1016/j.matdes.2015.07.095. GaoJ LiC ShilpakarU ShenY Improvements of mechanical properties in dissimilar joints of HDPE and ABS via carbon nanotubes during friction stir welding process Mater Des 2015 86 289 96 https://doi.org/10.1016/j.matdes.2015.07.095. 10.1016/j.matdes.2015.07.095 Search in Google Scholar

[14] Mustapha K, Abdessamad B, Azzeddine B, Mokhtar Z. Experimental investigation of friction stir welding process on high-density polyethylene. J Fail Anal Preven. 2020; 20:590–6; https://doi.org/10.1007/s11668-020-00867-0. MustaphaK AbdessamadB AzzeddineB MokhtarZ Experimental investigation of friction stir welding process on high-density polyethylene J Fail Anal Preven 2020 20 590 6 https://doi.org/10.1007/s11668-020-00867-0. 10.1007/s11668-020-00867-0 Search in Google Scholar

[15] Rehman RU, Sheikh-Ahmad J, Deveci S. Effect of preheating on joint quality in the friction stir welding of bimodal high density polyethylene. Int J Adv Manuf Technol. 2021; 117:1–14; https://doi.org/10.1007/s00170-021-07740-w. RehmanRU Sheikh-AhmadJ DeveciS Effect of preheating on joint quality in the friction stir welding of bimodal high density polyethylene Int J Adv Manuf Technol 2021 117 1 14 https://doi.org/10.1007/s00170-021-07740-w. 10.1007/s00170-021-07740-w Search in Google Scholar

[16] Kaddour H, Hadj Miloud M, El Bahri OC, Abdallah L. Mechanical behavior analysis of a friction stir welding (FSW) for welded joint applied to polymer materials: mechanical behavior analysis of a friction stir welding (FSW) for welded joint applied to polymer materials. Frattura ed Integrita Strutturale. 2019; 13:459–67; https://doi.org/10.3221/IGF-ESIS.47.36. KaddourH Hadj MiloudM El BahriOC AbdallahL Mechanical behavior analysis of a friction stir welding (FSW) for welded joint applied to polymer materials: mechanical behavior analysis of a friction stir welding (FSW) for welded joint applied to polymer materials Frattura ed Integrita Strutturale 2019 13 459 67 https://doi.org/10.3221/IGF-ESIS.47.36. 10.3221/IGF-ESIS.47.36 Search in Google Scholar

[17] Paoletti A, Lambiase F, Di Ilio A. Analysis of forces and temperatures in friction spot stir welding of thermoplastic polymers: analysis of forces and temperatures in friction spot stir welding of thermoplastic polymers. Int J Adv Manuf Technol. 2016; 83:1395–407; https://doi.org/10.1007/s00170-015-7669-y. PaolettiA LambiaseF Di IlioA Analysis of forces and temperatures in friction spot stir welding of thermoplastic polymers: analysis of forces and temperatures in friction spot stir welding of thermoplastic polymers Int J Adv Manuf Technol 2016 83 1395 407 https://doi.org/10.1007/s00170-015-7669-y. 10.1007/s00170-015-7669-y Search in Google Scholar

[18] Hasegawaa M, Asadab T, Ozawa Y. Study of friction welding of polyethylene. Welding Int. 2002; 16:537–43. HasegawaaM AsadabT OzawaY Study of friction welding of polyethylene Welding Int 2002 16 537 43 10.1080/09507110209549572 Search in Google Scholar

[19] Hasegawaa M, Yamaguchib Y, Uminob A, Furukawaa Y, Asadab T, Ozawa Y. Development of joining method of polyethylene branch pipe for gas and non-excavation construction method. Welding Int. 2015; 29:279–84. HasegawaaM YamaguchibY UminobA FurukawaaY AsadabT OzawaY Development of joining method of polyethylene branch pipe for gas and non-excavation construction method Welding Int 2015 29 279 84 10.1080/09507116.2014.921048 Search in Google Scholar

[20] Kalsi NS, Sharma VS. A statistical analysis of rotary friction welding of steel with varying carbon in work-pieces. Int J Adv Manuf Technol. 2011; 57:957–67; https://doi.org/10.1007/s00170-011-3361-z. KalsiNS SharmaVS A statistical analysis of rotary friction welding of steel with varying carbon in work-pieces Int J Adv Manuf Technol 2011 57 957 67 https://doi.org/10.1007/s00170-011-3361-z. 10.1007/s00170-011-3361-z Search in Google Scholar

[21] Ramalingam A, Muthuvel S. Identification of optimal condition for solid state welding of Al/SiCp composite using Taguchi principles integrated TOPSIS (TPIT) method. Int J Manuf Mater Mech Eng. 2017; 7:19–37; https://doi.org/10.4018/IJMMME.2017040102. RamalingamA MuthuvelS Identification of optimal condition for solid state welding of Al/SiCp composite using Taguchi principles integrated TOPSIS (TPIT) method Int J Manuf Mater Mech Eng 2017 7 19 37 https://doi.org/10.4018/IJMMME.2017040102. 10.4018/IJMMME.2017040102 Search in Google Scholar

[22] Singh KJ. Multi-objective optimization of high carbon steel (EN-31) and low carbon steel (SAE-1020) using Grey Taguchi method in rotary friction stir welding. Grey Syst Theory Appl. 2019; 9:385. SinghKJ Multi-objective optimization of high carbon steel (EN-31) and low carbon steel (SAE-1020) using Grey Taguchi method in rotary friction stir welding Grey Syst Theory Appl 2019 9 385 10.1108/GS-10-2018-0047 Search in Google Scholar

[23] Thakare KA, Vishwakarma HG, Bhave A. Experimental investigation of possible use of HDPE as thermal storage material in thermal storage type solar cookers. Int J Res Eng Technol. 2015; 4:92–9. ThakareKA VishwakarmaHG BhaveA Experimental investigation of possible use of HDPE as thermal storage material in thermal storage type solar cookers Int J Res Eng Technol 2015 4 92 9 10.15623/ijret.2015.0412019 Search in Google Scholar

[24] ASTM D638-14. Standard test method for tensile properties of plastics. 10th ed. West Conshohocken, PA, USA: ASTM International; 2014. ASTM D638-14 Standard test method for tensile properties of plastics 10th ed. West Conshohocken, PA, USA ASTM International 2014 Search in Google Scholar

[25] Can A, Sahin M, Kucuk M. Modeling of friction welding. International Scientific Conference (UNITEC 10), Gabrovo, 19–20 November 2010. CanA SahinM KucukM Modeling of friction welding International Scientific Conference (UNITEC 10) Gabrovo 19–20 November 2010 Search in Google Scholar

[26] Maalekian, M. Friction welding critical assessment of literature. Sci Technol Welding Joining. 2007; 12:738–59; https://doi.org/10.1179/174329307x249333. MaalekianM Friction welding critical assessment of literature Sci Technol Welding Joining 2007 12 738 59 https://doi.org/10.1179/174329307x249333. 10.1179/174329307X249333 Search in Google Scholar