Effect of novel grain refiner and Ni alloying additions on microstructure and mechanical properties of Al-Si9.8-Cu3.4 HPDC castings – optimization using Multi Criteria Decision making approach
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Camicia G, Timelli G. Grain refinement of gravity die cast secondary AlSi7Cu3Mg alloys for automotive cylinder heads. Trans Nonferrous Met Soc China. 2016;26(5):1211–21.CamiciaGTimelliGGrain refinement of gravity die cast secondary AlSi7Cu3Mg alloys for automotive cylinder headsTrans Nonferrous Met Soc China201626512112110.1016/S1003-6326(16)64222-XSearch in Google Scholar
Biswas P, Prasadu KD, Manas Kuma M. Effect of Bi addition on microstructure and mechanical properties of hypereutectic Al-17.6Si alloy. Mater Res Express. 2019;6(11):1–26. https://doi.org/10.1088/2053-1591/ab4d34.BiswasPPrasaduKDManas KumaMEffect of Bi addition on microstructure and mechanical properties of hypereutectic Al-17.6Si alloyMater Res Express2019611126https://doi.org/10.1088/2053-1591/ab4d34.10.1088/2053-1591/ab4d34Search in Google Scholar
Cai Q, Mendis Ch. L, Chang TH, Fan Z. Microstructure and mechanical properties of new die-cast quaternary Al-Cu-Si-Mg alloys. Mater Sci Eng A. 2021;800.140357. https://doi.org/10.1016/j.msea.2020.140357.CaiQMendisCh. LChangTHFanZMicrostructure and mechanical properties of new die-cast quaternary Al-Cu-Si-Mg alloysMater Sci Eng A2021800140357. https://doi.org/10.1016/j.msea.2020.140357.10.1016/j.msea.2020.140357Search in Google Scholar
Lu L, Dahle AK. Effects of combined additions of Sr and AlTiB grain refiners in hypoeutectic Al–Si foundry alloys. Mater Sci Eng A. 2006;435(436):288–96.LuLDahleAKEffects of combined additions of Sr and AlTiB grain refiners in hypoeutectic Al–Si foundry alloysMater Sci Eng A20064354362889610.1016/j.msea.2006.07.081Search in Google Scholar
Kori SA, Auradi V, Murty BS. Poisoning and fading mechanism of grain refinement in Al-7Si alloy. Mater Forum. 2005;29:387–93.KoriSAAuradiVMurtyBSPoisoning and fading mechanism of grain refinement in Al-7Si alloyMater Forum20052938793Search in Google Scholar
Murty BS, Kori SA, Chakraborty M. Grain refinement of aluminum and its alloys by heterogeneous nucleation and alloying. Int Mater Rev. 2002;47(1):3–29.MurtyBSKoriSAChakrabortyMGrain refinement of aluminum and its alloys by heterogeneous nucleation and alloyingInt Mater Rev200247132910.1179/095066001225001049Search in Google Scholar
Liu F, Zhao H, Yang R, Sun F. Microstructure and mechanical properties of high vacuum die-cast AlSiMgMn alloys at as-cast and T6-treated conditions. Materals (Basel). 2019;12(13):2065. https://doi.org/10.3390/ma12132065.LiuFZhaoHYangRSunFMicrostructure and mechanical properties of high vacuum die-cast AlSiMgMn alloys at as-cast and T6-treated conditionsMaterals (Basel)201912132065https://doi.org/10.3390/ma12132065.10.3390/ma12132065665127331252554Search in Google Scholar
Chen Z, Wang T, Gao L, Fu H, Li T. Grain refinement and tensile properties improvement of aluminum foundry alloys by inoculation with Al–B master alloy. Mater Sci Eng A. 2012;553:32–6.ChenZWangTGaoLFuHLiTGrain refinement and tensile properties improvement of aluminum foundry alloys by inoculation with Al–B master alloyMater Sci Eng A201255332610.1016/j.msea.2012.05.088Search in Google Scholar
Sigsworth GK. The grain refining of aluminum and phase relationships in the Al–Ti–B system. Metall Mater Trans A. 1984;15:277–82.SigsworthGKThe grain refining of aluminum and phase relationships in the Al–Ti–B systemMetall Mater Trans A1984152778210.1007/BF02645112Search in Google Scholar
Guzowski MM, Sigworth GK, Sentner DA. The role of boron in the grain refinement of aluminum with titanium. Metall Mater Trans A. 1987;18:603–19.GuzowskiMMSigworthGKSentnerDAThe role of boron in the grain refinement of aluminum with titaniumMetall Mater Trans A1987186031910.1007/BF02649476Search in Google Scholar
Auradi V, Kori SA. Reaction time for the manufacturing of Al–Ti–B (Ti:B = 5:1, 1:3) master alloys and their grain refining efficiency on Al–7Si alloys. Trans Indian Inst Met. 2012;65:637–45.AuradiVKoriSAReaction time for the manufacturing of Al–Ti–B (Ti:B = 5:1, 1:3) master alloys and their grain refining efficiency on Al–7Si alloysTrans Indian Inst Met2012656374510.1007/s12666-012-0223-9Search in Google Scholar
Han YF, Li K, Wang J, Shu D, Sun BD. Microstructure and grain refining performance of Al–5Ti–1B master alloy prepared under high-intensity ultrasound. Mater Sci Eng A. 2006;430:326–31.HanYFLiKWangJShuDSunBDMicrostructure and grain refining performance of Al–5Ti–1B master alloy prepared under high-intensity ultrasoundMater Sci Eng A20064303263110.1016/j.msea.2006.05.105Search in Google Scholar
Li H, Lin B, Xu R, Liu K, Xiao H, Zhao Y. Enhanced mechanical properties of Al–Si–Cu–Mn–Fe alloys at elevated temperatures through grain refinement and dispersoid strengthening. Mater Sci Technol. 2020;36(3):307–19. https://doi.org/10.1080/02670836.2019.1705039.LiHLinBXuRLiuKXiaoHZhaoYEnhanced mechanical properties of Al–Si–Cu–Mn–Fe alloys at elevated temperatures through grain refinement and dispersoid strengtheningMater Sci Technol202036330719https://doi.org/10.1080/02670836.2019.1705039.10.1080/02670836.2019.1705039Search in Google Scholar
Birol Y. Production of Al–Ti–B grain refining master alloys from B2O3 and K2TiF6. J Alloys Compd. 2007;443:94–8.BirolYProduction of Al–Ti–B grain refining master alloys from B2O3 and K2TiF6J Alloys Compd200744394810.1016/j.jallcom.2006.10.009Search in Google Scholar
Qiu D, Taylor JA, Zhang MX. A mechanism for the poisoning effect of silicon on the grain refinement of Al-Si alloys. Acta Mater. 2007;55:1447–56.QiuDTaylorJAZhangMXA mechanism for the poisoning effect of silicon on the grain refinement of Al-Si alloysActa Mater20075514475610.1016/j.actamat.2006.09.046Search in Google Scholar
Birol Y. AlB3 master alloy to grain refine AlSi10Mg and AlSi12Cu aluminium foundry alloys. J Alloys Compd. 2012;513:150–3.BirolYAlB3 master alloy to grain refine AlSi10Mg and AlSi12Cu aluminium foundry alloysJ Alloys Compd2012513150310.1016/j.jallcom.2011.10.010Search in Google Scholar
Zhu M, Jian ZY, Yang GC. Effects of T6 heat treatment on the microstructure, tensile properties, and fracture behavior of the modified A356 alloys. Mater Des. 2012;36(1):243–9.ZhuMJianZYYangGCEffects of T6 heat treatment on the microstructure, tensile properties, and fracture behavior of the modified A356 alloysMater Des2012361243910.1016/j.matdes.2011.11.018Search in Google Scholar
Sritharan T, Li H. Influence of titanium to boron ratio on the ability to grain refine aluminium–silicon alloys. J Mater Process Technol. 1997;63:585–9.SritharanTLiHInfluence of titanium to boron ratio on the ability to grain refine aluminium–silicon alloysJ Mater Process Technol199763585910.1016/S0924-0136(96)02688-XSearch in Google Scholar
Murty BS, Kori SA, Chakraborty M. Influence of silicon and magnesium on grain refinement in aluminium alloys. Mater Sci Technol. 1999;15:986–92.MurtyBSKoriSAChakrabortyMInfluence of silicon and magnesium on grain refinement in aluminium alloysMater Sci Technol1999159869210.1179/026708399101506823Search in Google Scholar
Murty BS, Kori SA, Chakraborty M. Development of an efficient grain refiner for Al–7Si alloy and its modification with strontium. Mater Sci Eng A. 2000;283:94–104.MurtyBSKoriSAChakrabortyMDevelopment of an efficient grain refiner for Al–7Si alloy and its modification with strontiumMater Sci Eng A20002839410410.1016/S0921-5093(99)00794-7Search in Google Scholar
Nowak M, Bolzoni L, Hari Babu N. Grain refinement of Al–Si alloys by Nb–B inoculation. Part I: Concept development and effect on binary alloys. Mater Des. 2015;66:366–75.NowakMBolzoniLHari BabuNGrain refinement of Al–Si alloys by Nb–B inoculation. Part I: Concept development and effect on binary alloysMater Des2015663667510.1016/j.matdes.2014.08.066Search in Google Scholar
Apparao K. Ch, Birru AK. Grain refining potency of Al–3.5FeNb–1.5C master alloy on pure Al and Al-Si9.8-Cu3.4 alloy. China Foundry J. 2018;15(4):314–9.ApparaoK. ChBirruAKGrain refining potency of Al–3.5FeNb–1.5C master alloy on pure Al and Al-Si9.8-Cu3.4 alloyChina Foundry J2018154314910.1007/s41230-018-8030-5Search in Google Scholar
Mostafa A, Mohammad HS, Parviz A, Abolfazl K. Hybrid multi-objective optimization of microstructural and mechanical properties of B4C/A356 composites fabricated by FSP using TOPSIS and modified NSGA-II. Trans Nonferrous Met Soc China. 2017;27:2317–33.MostafaAMohammadHSParvizAAbolfazlKHybrid multi-objective optimization of microstructural and mechanical properties of B4C/A356 composites fabricated by FSP using TOPSIS and modified NSGA-IITrans Nonferrous Met Soc China20172723173310.1016/S1003-6326(17)60258-9Search in Google Scholar
Srinivasan L, Khan Md C, Deepan BKT, Sathiya P, Biju S. Application of GRA and TOPSIS optimization techniques in GTA welding of 15CDV6 aerospace material. Trans Indian Inst Met. 2017;71:373–282.SrinivasanLKhan MdCDeepanBKTSathiyaPBijuSApplication of GRA and TOPSIS optimization techniques in GTA welding of 15CDV6 aerospace materialTrans Indian Inst Met20177137328210.1007/s12666-017-1166-ySearch in Google Scholar
Sudhagar S, Sakthivel M, Mathew PJ, Daniel A. A multi criteria decision making approach for process improvement in friction stir welding of aluminium alloy. Measurement. 2017;108:1–8.SudhagarSSakthivelMMathewPJDanielAA multi criteria decision making approach for process improvement in friction stir welding of aluminium alloyMeasurement20171081810.1016/j.measurement.2017.05.023Search in Google Scholar
Apparao K. Ch, Birru AK. QFD-Taguchi based hybrid approach in die casting process optimization. Trans Nonferrous Met Soc China. 2017;27:2345–2356.ApparaoK. ChBirruAKQFD-Taguchi based hybrid approach in die casting process optimizationTrans Nonferrous Met Soc China2017272345235610.1016/S1003-6326(17)60260-7Search in Google Scholar
Apparao K. Ch, Birru AK, Kumar BP. Porosity formation studies in high pressure die castings of Al-9Si-3Cu alloy based on Taguchi method. Int J Struct Integr. 2021;13(1):78–91.ApparaoK. ChBirruAKKumarBPPorosity formation studies in high pressure die castings of Al-9Si-3Cu alloy based on Taguchi methodInt J Struct Integr2021131789110.1108/IJSI-06-2020-0056Search in Google Scholar
Deng J. Introduction to grey system. J Grey Syst. 1989;1:1–24.DengJIntroduction to grey systemJ Grey Syst19891124Search in Google Scholar
Ghetiya ND, Patel KM, Kavar AJ. Multi-objective optimization of FSW process parameters of aluminium alloy using taguchi-based grey relational analysis. Trans Indian Inst Met. 2016;69:917–23.GhetiyaNDPatelKMKavarAJMulti-objective optimization of FSW process parameters of aluminium alloy using taguchi-based grey relational analysisTrans Indian Inst Met2016699172310.1007/s12666-015-0581-1Search in Google Scholar
Zedan Y, Samuel FH. Effects of Fe intermetallics on the machinability of heat-treated Al-(7-11)% Si alloys. J Mater Process Technol. 2010;210:245–57.ZedanYSamuelFHEffects of Fe intermetallics on the machinability of heat-treated Al-(7-11)% Si alloysJ Mater Process Technol20102102455710.1016/j.jmatprotec.2009.09.007Search in Google Scholar
Samuel AM, Doty HW, Valtierra S, Samuel FH. Beta Al5FeSi phase platelets-porosity formation relationship in A319.2 type alloys. Int J Met. 2017;12(1):55–70.SamuelAMDotyHWValtierraSSamuelFHBeta Al5FeSi phase platelets-porosity formation relationship in A319.2 type alloysInt J Met2017121557010.1007/s40962-017-0136-9Search in Google Scholar