Microstructure, tribological performances, and wear mechanisms of laser-cladded TiC-reinforced NiMo coatings under grease-lubrication condition

[1] Zhao Y, Cui C, Han X, Cui S, Li N, Qian Z. Preparation of in situ NbC-TiC@Graphene/Fe composite inoculant and its effect on microstructures and properties of GCr15. Mat Sci Eng A-Struct. 2020;772:138737; https://doi.org/10.1016/j.msea.2019.138737 ZhaoY CuiC HanX CuiS LiN QianZ Preparation of in situ NbC-TiC@Graphene/Fe composite inoculant and its effect on microstructures and properties of GCr15 Mat Sci Eng A-Struct 2020 772 138737; https://doi.org/10.1016/j.msea.2019.138737 10.1016/j.msea.2019.138737 Search in Google Scholar

[2] El Laithy M, Wang L, Harvey TJ, Vierneusel B, Correns M, Blass T. Further understanding of rolling contact fatigue in rolling element bearings -A review. Tribol Int. 2020;140:138737; https://doi.org/10.1016/j.triboint.2019.105849 El LaithyM WangL HarveyTJ VierneuselB CorrensM BlassT Further understanding of rolling contact fatigue in rolling element bearings -A review Tribol Int 2020 140 138737; https://doi.org/10.1016/j.triboint.2019.105849 10.1016/j.triboint.2019.105849 Search in Google Scholar

[3] Cerrada M, Sánchez RV, Li C, Pacheco F, Cabrera D, de Oliveirae JV, et al. A review on data-driven fault severity assessment in rolling bearings. Mech Syst Signal Pr. 2018;99:169–96; https://doi.org/10.1016/j.ymssp.2017.06.012 CerradaM SánchezRV LiC PachecoF CabreraD de OliveiraeJV A review on data-driven fault severity assessment in rolling bearings Mech Syst Signal Pr 2018 99 169 96 https://doi.org/10.1016/j.ymssp.2017.06.012 10.1016/j.ymssp.2017.06.012 Search in Google Scholar

[4] Zikin A, Badisch E, Hussaionva I, Tomastik C, Danninger H. Characterization of TiC-NiMo reinforced Ni-based hardfacing. Surf Coat Technol. 2013;236:36–44; https://doi.org/10.1016/j.surfcoat.2013.02.027 ZikinA BadischE HussaionvaI TomastikC DanningerH Characterization of TiC-NiMo reinforced Ni-based hardfacing Surf Coat Technol 2013 236 36 44 https://doi.org/10.1016/j.surfcoat.2013.02.027 10.1016/j.surfcoat.2013.02.027 Search in Google Scholar

[5] Tan YF, Long HE, Wang XL, Hong X, Wang WG. Tribological properties and wear prediction model of TiC particles reinforced Ni-base alloy composite coatings. Trans Nonferr Metal Soc. 2014;24:2566–73; https://doi.org/10.1016/S1003-6326(14)63384-7 TanYF LongHE WangXL HongX WangWG Tribological properties and wear prediction model of TiC particles reinforced Ni-base alloy composite coatings Trans Nonferr Metal Soc 2014 24 2566 73 https://doi.org/10.1016/S1003-6326(14)63384-7 10.1016/S1003-6326(14)63384-7 Search in Google Scholar

[6] Téllez-Villaseñor MA, León-Patiño CA, Aguilar-Reyes EA, Bedolla-Jacuinde A. Effect of load and sliding velocity on the wear behaviour of infiltrated TiC/Cu-Ni composites. Wear. 2021;484–485:203667; https://doi.org/10.1016/j.wear.2021.203667 Téllez-VillaseñorMA León-PatiñoCA Aguilar-ReyesEA Bedolla-JacuindeA Effect of load and sliding velocity on the wear behaviour of infiltrated TiC/Cu-Ni composites Wear 2021 484–485 203667; https://doi.org/10.1016/j.wear.2021.203667 10.1016/j.wear.2021.203667 Search in Google Scholar

[7] Wang R, Zhu GL, Yang C, Zhou WZ, Wang DH, Dong AP, et al. Novel selective laser melting processed in-situ TiC particle-reinforced Ni matrix composite with excellent processability and mechanical properties. Mat Sci Eng A-Struct. 2020;797:140145; https://doi.org/10.1016/j.msea.2020.140145 WangR ZhuGL YangC ZhouWZ WangDH DongAP Novel selective laser melting processed in-situ TiC particle-reinforced Ni matrix composite with excellent processability and mechanical properties Mat Sci Eng A-Struct 2020 797 140145; https://doi.org/10.1016/j.msea.2020.140145 10.1016/j.msea.2020.140145 Search in Google Scholar

[8] Kübarsepp J, Klaasen H, Pirso J. Behaviour of TiC-base cermets in different wear conditions. Wear. 2001;249:229–34; https://doi.org/10.1016/S0043-1648(01)00569-5 KübarseppJ KlaasenH PirsoJ Behaviour of TiC-base cermets in different wear conditions Wear 2001 249 229 34 https://doi.org/10.1016/S0043-1648(01)00569-5 10.1016/S0043-1648(01)00569-5 Search in Google Scholar

[9] Hussainova I. Effect of microstructure on the erosive wear of titanium carbide-based cermets. Wear. 2003;255:121–8; https://doi.org/10.1016/S0043-1648(03)00198-4 HussainovaI Effect of microstructure on the erosive wear of titanium carbide-based cermets Wear 2003 255 121 8 https://doi.org/10.1016/S0043-1648(03)00198-4 10.1016/S0043-1648(03)00198-4 Search in Google Scholar

[10] Zhu LD, Xue PS, Lan Q, Meng GR, Ren Y, Yang ZC, et al. Recent research and development status of laser cladding: A review. Opt Laser Technol. 2021;138:106915; https://doi.org/10.1016/j.optlastec.2021.106915 ZhuLD XuePS LanQ MengGR RenY YangZC Recent research and development status of laser cladding: A review Opt Laser Technol 2021 138 106915; https://doi.org/10.1016/j.optlastec.2021.106915 10.1016/j.optlastec.2021.106915 Search in Google Scholar

[11] Majumdar JD, Galun R, Mordike BL, Manna I. Effect of laser surface melting on corrosion and wear resistance of a commercial magnesium alloy. Mat Sci Eng A-Struct. 2003;361(1–2):119–29; https://doi.org/10.1016/S0921-5093(03)00519-7 MajumdarJD GalunR MordikeBL MannaI Effect of laser surface melting on corrosion and wear resistance of a commercial magnesium alloy Mat Sci Eng A-Struct 2003 361 1–2 119 29 https://doi.org/10.1016/S0921-5093(03)00519-7 10.1016/S0921-5093(03)00519-7 Search in Google Scholar

[12] Nurminena J, Näkki J, Vuoristo P. Microstructure and properties of hard and wear resistant MMC coatings deposited by laser cladding. Int J Refract Met H. 2009;27(2):472–8; https://doi.org/10.1016/j.ijrmhm.2008.10.008 NurminenaJ NäkkiJ VuoristoP Microstructure and properties of hard and wear resistant MMC coatings deposited by laser cladding Int J Refract Met H 2009 27 2 472 8 https://doi.org/10.1016/j.ijrmhm.2008.10.008 10.1016/j.ijrmhm.2008.10.008 Search in Google Scholar

[13] Huang L, Deng XT, Wang Q, Jia Y, Li CR, Wang ZD. Solidification and sliding wear behavior of low-alloy abrasion-resistant steel reinforced with TiC particles. Wear. 2020;458–459:203444; https://doi.org/10.1016/j.wear.2020.203444 HuangL DengXT WangQ JiaY LiCR WangZD Solidification and sliding wear behavior of low-alloy abrasion-resistant steel reinforced with TiC particles Wear 2020 458–459 203444; https://doi.org/10.1016/j.wear.2020.203444 10.1016/j.wear.2020.203444 Search in Google Scholar

[14] Lin CL, Meehan PA. Morphological and elemental analysis of wear debris naturally formed in grease lubricated railway axle bearings. Wear. 2021;484–485:203994; https://doi.org/10.1016/j.wear.2021.203994 LinCL MeehanPA Morphological and elemental analysis of wear debris naturally formed in grease lubricated railway axle bearings Wear 2021 484–485 203994; https://doi.org/10.1016/j.wear.2021.203994 10.1016/j.wear.2021.203994 Search in Google Scholar

[15] Lu JZ, Cao J, Lu HF, Zhang LY, Luo KY. Wear properties and microstructural analyses of Fe-based coatings with various WC contents on H13 die steel by laser cladding. Surf Coat Technol. 2019;369:228–37; https://doi.org/10.1016/j.surfcoat.2019.04.063 LuJZ CaoJ LuHF ZhangLY LuoKY Wear properties and microstructural analyses of Fe-based coatings with various WC contents on H13 die steel by laser cladding Surf Coat Technol 2019 369 228 37 https://doi.org/10.1016/j.surfcoat.2019.04.063 10.1016/j.surfcoat.2019.04.063 Search in Google Scholar

[16] Zhou J, Kong D. Microstructure, Tribological performance, and wear mechanism of Cr- and Mo-reinforced FeSiB coatings by laser cladding. J Mater Eng Perform. 2020;29:7428–44; https://doi.org/10.1007/s11665-020-05187-w ZhouJ KongD Microstructure, Tribological performance, and wear mechanism of Cr- and Mo-reinforced FeSiB coatings by laser cladding J Mater Eng Perform 2020 29 7428 44 https://doi.org/10.1007/s11665-020-05187-w 10.1007/s11665-020-05187-w Search in Google Scholar

[17] Zhang PL, Li MC, Yan H, Chen JS, Yu ZS, Ye X. Microstructure evolution of Ni-Mo-Fe-Si quaternary metal silicide alloy composite coatings by laser cladding on pure Ni. J Alloy Compd. 2019;785:984–1000; https://doi.org/10.1016/j.jallcom.2019.01.191 ZhangPL LiMC YanH ChenJS YuZS YeX Microstructure evolution of Ni-Mo-Fe-Si quaternary metal silicide alloy composite coatings by laser cladding on pure Ni J Alloy Compd 2019 785 984 1000 https://doi.org/10.1016/j.jallcom.2019.01.191 10.1016/j.jallcom.2019.01.191 Search in Google Scholar

[18] Jiang PF, Zhang CH, Zhang S, Zhang JB, Chen J, Liu Y. Fabrication and wear behavior of TiC reinforced FeCoCrAlCu-based high entropy alloy coatings by laser surface alloying. Mater Chem Phys. 2020;255:123571; https://doi.org/10.1016/j.matchemphys.2020.123571 JiangPF ZhangCH ZhangS ZhangJB ChenJ LiuY Fabrication and wear behavior of TiC reinforced FeCoCrAlCu-based high entropy alloy coatings by laser surface alloying Mater Chem Phys 2020 255 123571; https://doi.org/10.1016/j.matchemphys.2020.123571 10.1016/j.matchemphys.2020.123571 Search in Google Scholar

[19] Dadoo A, Boutorabia SMA. Correlation between pulsed laser parameters and MC carbide morphology in H13 tool steel/TiC composite coating. Opt Laser Technol. 2020;127:106120; https://doi.org/10.1016/j.optlastec.2020.106120 DadooA BoutorabiaSMA Correlation between pulsed laser parameters and MC carbide morphology in H13 tool steel/TiC composite coating Opt Laser Technol 2020 127 106120; https://doi.org/10.1016/j.optlastec.2020.106120 10.1016/j.optlastec.2020.106120 Search in Google Scholar

[20] Chen H, Lu YY, Sun YS, Wei YF, Wang XY, Liu DJ. Coarse TiC particles reinforced H13 steel matrix composites produced by laser cladding. Surf Coat Technol. 2020;395:125867; https://doi.org/10.1016/j.surfcoat.2020.125867 ChenH LuYY SunYS WeiYF WangXY LiuDJ Coarse TiC particles reinforced H13 steel matrix composites produced by laser cladding Surf Coat Technol 2020 395 125867; https://doi.org/10.1016/j.surfcoat.2020.125867 10.1016/j.surfcoat.2020.125867 Search in Google Scholar

[21] Han TF, Xiao M, Zhang Y, Shen YF. Effects of graphite and graphene spatial structure on the TiC crystal structure and the properties of composite coatings. Surf Coat Technol. 2019;377:124909; https://doi.org/10.1016/j.surfcoat.2019.124909 HanTF XiaoM ZhangY ShenYF Effects of graphite and graphene spatial structure on the TiC crystal structure and the properties of composite coatings Surf Coat Technol 2019 377 124909; https://doi.org/10.1016/j.surfcoat.2019.124909 10.1016/j.surfcoat.2019.124909 Search in Google Scholar

[22] Tejero-Martin D, Bai MW, Mata J, Hussain T. Evolution of porosity in suspension thermal sprayed YSZ thermal barrier coatings through neutron scattering and image analysis techniques. J Eur Ceram Soc. 2021;41(12):6035–48; https://doi.org/10.1016/j.jeurceramsoc.2021.04.020 Tejero-MartinD BaiMW MataJ HussainT Evolution of porosity in suspension thermal sprayed YSZ thermal barrier coatings through neutron scattering and image analysis techniques J Eur Ceram Soc 2021 41 12 6035 48 https://doi.org/10.1016/j.jeurceramsoc.2021.04.020 10.1016/j.jeurceramsoc.2021.04.020 Search in Google Scholar

[23] Liu WH, Zeng W, Liu FS, Tang B, Liu QJ, Wang WD. The mechanical and electronic properties of o-Fe2C, h-Fe3C, t-Fe5C2, m-Fe5C2 and h-Fe7C3 compounds: First-principles calculations. Phys B. 2021;606:412825; https://doi.org/10.1016/j.physb.2021.412825 LiuWH ZengW LiuFS TangB LiuQJ WangWD The mechanical and electronic properties of o-Fe2C, h-Fe3C, t-Fe5C2, m-Fe5C2 and h-Fe7C3 compounds: First-principles calculations Phys B 2021 606 412825; https://doi.org/10.1016/j.physb.2021.412825 10.1016/j.physb.2021.412825 Search in Google Scholar

[24] Braic M, Balaceanu M, Parau AC, Dine M, Vladescu A. Investigation of multilayered TiSiC/NiC protective coatings. Vacuum. 2015;120(A):60–6; https://doi.org/10.1016/j.vacuum.2015.06.019 BraicM BalaceanuM ParauAC DineM VladescuA Investigation of multilayered TiSiC/NiC protective coatings Vacuum 2015 120 A 60 6 https://doi.org/10.1016/j.vacuum.2015.06.019 10.1016/j.vacuum.2015.06.019 Search in Google Scholar

[25] Zhou JL, Kong DJ. Immersion corrosion and electrochemical performances of laser cladded FeSiB, FeSiBCr and FeSiBCrMo coatings in 3.5 wt% NaCl solution. Surf Coat Technol. 2020;383:125229; https://doi.org/10.1016/j.surfcoat.2019.125229 ZhouJL KongDJ Immersion corrosion and electrochemical performances of laser cladded FeSiB, FeSiBCr and FeSiBCrMo coatings in 3.5 wt% NaCl solution Surf Coat Technol 2020 383 125229; https://doi.org/10.1016/j.surfcoat.2019.125229 10.1016/j.surfcoat.2019.125229 Search in Google Scholar

[26] Liu H, Liu J, Chen PJ, Yang HF. Microstructure and high temperature wear behaviour of in-situ TiC reinforced AlCoCrFeNi-based high-entropy alloy composite coatings fabricated by laser cladding. Opt Laser Technol. 2019;118:140–50; https://doi.org/10.1016/j.optlastec.2019.05.006 LiuH LiuJ ChenPJ YangHF Microstructure and high temperature wear behaviour of in-situ TiC reinforced AlCoCrFeNi-based high-entropy alloy composite coatings fabricated by laser cladding Opt Laser Technol 2019 118 140 50 https://doi.org/10.1016/j.optlastec.2019.05.006 10.1016/j.optlastec.2019.05.006 Search in Google Scholar

[27] Zhu HM, Ouyang MN, Hu JP, Zhang JW, Qiu CJ. Design and development of TiC-reinforced 410 martensitic stainless steel coatings fabricated by laser cladding. Ceram Int. 2021;47:12505–13; https://doi.org/10.1016/j.ceramint.2021.01.108 ZhuHM OuyangMN HuJP ZhangJW QiuCJ Design and development of TiC-reinforced 410 martensitic stainless steel coatings fabricated by laser cladding Ceram Int 2021 47 12505 13 https://doi.org/10.1016/j.ceramint.2021.01.108 10.1016/j.ceramint.2021.01.108 Search in Google Scholar

[28] Cui G, Han B, Zhao JB, Li MY. Comparative study on tribological properties of the sulfurizing layers on Fe, Ni and Co based laser cladding coatings. Tribol Int. 2019;134:36–49; https://doi.org/10.1016/j.triboint.2019.01.019 CuiG HanB ZhaoJB LiMY Comparative study on tribological properties of the sulfurizing layers on Fe, Ni and Co based laser cladding coatings Tribol Int 2019 134 36 49 https://doi.org/10.1016/j.triboint.2019.01.019 10.1016/j.triboint.2019.01.019 Search in Google Scholar

[29] Muhaffel F, Kaba M, Cempura G, Derin B, Kruk A, Atar E, et al. Influence of alumina and zirconia incorporations on the structure and wear resistance of titania-based MAO coatings. Surf Coat Technol. 2019;377:124900; https://doi.org/10.1016/j.surfcoat.2019.124900 MuhaffelF KabaM CempuraG DerinB KrukA AtarE Influence of alumina and zirconia incorporations on the structure and wear resistance of titania-based MAO coatings Surf Coat Technol 2019 377 124900; https://doi.org/10.1016/j.surfcoat.2019.124900 10.1016/j.surfcoat.2019.124900 Search in Google Scholar

[30] Zhang Q, Wu ZT, Xu YX, Wang QM, Chen L, Kim KH. Improving the mechanical and anti-wear properties of AlTiN coatings by the hybrid arc and sputtering deposition. Surf Coat Technol. 2019;378:125022; https://doi.org/10.1016/j.surfcoat.2019.125022 ZhangQ WuZT XuYX WangQM ChenL KimKH Improving the mechanical and anti-wear properties of AlTiN coatings by the hybrid arc and sputtering deposition Surf Coat Technol 2019 378 125022; https://doi.org/10.1016/j.surfcoat.2019.125022 10.1016/j.surfcoat.2019.125022 Search in Google Scholar

[31] Larsson E, Westbroek R, Leckner J, Jacobson S, Rudolphi ÅK. Grease-lubricated tribological contacts-Influence of graphite, graphene oxide and reduced graphene oxide as lubricating additives in lithium complex (LiX)- and polypropylene (PP)-thickened greases. Wear. 2021;486–487:204107; https://doi.org/10.1016/j.wear.2021.204107 LarssonE WestbroekR LecknerJ JacobsonS RudolphiÅK Grease-lubricated tribological contacts-Influence of graphite, graphene oxide and reduced graphene oxide as lubricating additives in lithium complex (LiX)- and polypropylene (PP)-thickened greases Wear 2021 486–487 204107; https://doi.org/10.1016/j.wear.2021.204107 10.1016/j.wear.2021.204107 Search in Google Scholar

[32] León-Patiño CA, Braulio-Sánchez M, Aguilar-Reyes EA, Bedolla-Becerril E, Bedolla-Jacuinde A. Dry sliding wear behavior of infiltrated particulate reinforced Ni/TiC composites. Wear. 2019;426–427:989–95; https://doi.org/10.1016/j.wear.2019.01.074 León-PatiñoCA Braulio-SánchezM Aguilar-ReyesEA Bedolla-BecerrilE Bedolla-JacuindeA Dry sliding wear behavior of infiltrated particulate reinforced Ni/TiC composites Wear 2019 426–427 989 95 https://doi.org/10.1016/j.wear.2019.01.074 10.1016/j.wear.2019.01.074 Search in Google Scholar

[33] Zhou JL, Kong DJ. Effects of Al and Ti additions on corrosive-wear and electrochemical behaviors of laser cladded FeSiB coatings. Opt Laser Technol. 2019;124:105958; https://doi.org/10.1016/j.optlastec.2019.105958 ZhouJL KongDJ Effects of Al and Ti additions on corrosive-wear and electrochemical behaviors of laser cladded FeSiB coatings Opt Laser Technol 2019 124 105958; https://doi.org/10.1016/j.optlastec.2019.105958 10.1016/j.optlastec.2019.105958 Search in Google Scholar

[34] Liu JS, Shi Y. Microstructure and wear behavior of laser-cladded Ni-based coatings decorated by graphite particles. Surf Coat Technol. 2021;412:127044; https://doi.org/10.1016/j.surfcoat.2021.127044 LiuJS ShiY Microstructure and wear behavior of laser-cladded Ni-based coatings decorated by graphite particles Surf Coat Technol 2021 412 127044; https://doi.org/10.1016/j.surfcoat.2021.127044 10.1016/j.surfcoat.2021.127044 Search in Google Scholar

[35] Shi JZ, Ge Y, Kong DJ. Microstructure, dry sliding friction performances and wear mechanism of laser cladded WC-10Co4Cr coating with different Al₂O₃ mass fractions. Surf Coat Technol. 2021;406:126749; https://doi.org/10.1016/j.surfcoat.2020.126749 ShiJZ GeY KongDJ Microstructure, dry sliding friction performances and wear mechanism of laser cladded WC-10Co4Cr coating with different Al₂O₃ mass fractions Surf Coat Technol 2021 406 126749; https://doi.org/10.1016/j.surfcoat.2020.126749 10.1016/j.surfcoat.2020.126749 Search in Google Scholar

[36] Cai YC, Zhu LS, Cui Y, Shan MD, Li HJ, Xin Y, et al. Fracture and wear mechanisms of FeMnCrNiCo + x(TiC) composite high-entropy alloy cladding layers. Appl Surf Sci. 2021;543:148794; https://doi.org/10.1016/j.apsusc.2020.148794 CaiYC ZhuLS CuiY ShanMD LiHJ XinY Fracture and wear mechanisms of FeMnCrNiCo + x(TiC) composite high-entropy alloy cladding layers Appl Surf Sci 2021 543 148794; https://doi.org/10.1016/j.apsusc.2020.148794 10.1016/j.apsusc.2020.148794 Search in Google Scholar