This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Zhao Y, Cui C, Han X, Cui S, Li N, Qian Z. Preparation of in situ NbC-TiC@Graphene/Fe composite inoculant and its effect on microstructures and properties of GCr15. Mat Sci Eng A-Struct. 2020;772:138737; https://doi.org/10.1016/j.msea.2019.138737ZhaoYCuiCHanXCuiSLiNQianZPreparation of in situ NbC-TiC@Graphene/Fe composite inoculant and its effect on microstructures and properties of GCr152020772138737; https://doi.org/10.1016/j.msea.2019.13873710.1016/j.msea.2019.138737Search in Google Scholar
El Laithy M, Wang L, Harvey TJ, Vierneusel B, Correns M, Blass T. Further understanding of rolling contact fatigue in rolling element bearings -A review. Tribol Int. 2020;140:138737; https://doi.org/10.1016/j.triboint.2019.105849El LaithyMWangLHarveyTJVierneuselBCorrensMBlassTFurther understanding of rolling contact fatigue in rolling element bearings -A review2020140138737; https://doi.org/10.1016/j.triboint.2019.10584910.1016/j.triboint.2019.105849Search in Google Scholar
Cerrada M, Sánchez RV, Li C, Pacheco F, Cabrera D, de Oliveirae JV, et al. A review on data-driven fault severity assessment in rolling bearings. Mech Syst Signal Pr. 2018;99:169–96; https://doi.org/10.1016/j.ymssp.2017.06.012CerradaMSánchezRVLiCPachecoFCabreraDde OliveiraeJVA review on data-driven fault severity assessment in rolling bearings20189916996https://doi.org/10.1016/j.ymssp.2017.06.01210.1016/j.ymssp.2017.06.012Search in Google Scholar
Zikin A, Badisch E, Hussaionva I, Tomastik C, Danninger H. Characterization of TiC-NiMo reinforced Ni-based hardfacing. Surf Coat Technol. 2013;236:36–44; https://doi.org/10.1016/j.surfcoat.2013.02.027ZikinABadischEHussaionvaITomastikCDanningerHCharacterization of TiC-NiMo reinforced Ni-based hardfacing20132363644https://doi.org/10.1016/j.surfcoat.2013.02.02710.1016/j.surfcoat.2013.02.027Search in Google Scholar
Tan YF, Long HE, Wang XL, Hong X, Wang WG. Tribological properties and wear prediction model of TiC particles reinforced Ni-base alloy composite coatings. Trans Nonferr Metal Soc. 2014;24:2566–73; https://doi.org/10.1016/S1003-6326(14)63384-7TanYFLongHEWangXLHongXWangWGTribological properties and wear prediction model of TiC particles reinforced Ni-base alloy composite coatings201424256673https://doi.org/10.1016/S1003-6326(14)63384-710.1016/S1003-6326(14)63384-7Search in Google Scholar
Téllez-Villaseñor MA, León-Patiño CA, Aguilar-Reyes EA, Bedolla-Jacuinde A. Effect of load and sliding velocity on the wear behaviour of infiltrated TiC/Cu-Ni composites. Wear. 2021;484–485:203667; https://doi.org/10.1016/j.wear.2021.203667Téllez-VillaseñorMALeón-PatiñoCAAguilar-ReyesEABedolla-JacuindeAEffect of load and sliding velocity on the wear behaviour of infiltrated TiC/Cu-Ni composites2021484–485203667; https://doi.org/10.1016/j.wear.2021.20366710.1016/j.wear.2021.203667Search in Google Scholar
Wang R, Zhu GL, Yang C, Zhou WZ, Wang DH, Dong AP, et al. Novel selective laser melting processed in-situ TiC particle-reinforced Ni matrix composite with excellent processability and mechanical properties. Mat Sci Eng A-Struct. 2020;797:140145; https://doi.org/10.1016/j.msea.2020.140145WangRZhuGLYangCZhouWZWangDHDongAPNovel selective laser melting processed in-situ TiC particle-reinforced Ni matrix composite with excellent processability and mechanical properties2020797140145; https://doi.org/10.1016/j.msea.2020.14014510.1016/j.msea.2020.140145Search in Google Scholar
Kübarsepp J, Klaasen H, Pirso J. Behaviour of TiC-base cermets in different wear conditions. Wear. 2001;249:229–34; https://doi.org/10.1016/S0043-1648(01)00569-5KübarseppJKlaasenHPirsoJBehaviour of TiC-base cermets in different wear conditions200124922934https://doi.org/10.1016/S0043-1648(01)00569-510.1016/S0043-1648(01)00569-5Search in Google Scholar
Hussainova I. Effect of microstructure on the erosive wear of titanium carbide-based cermets. Wear. 2003;255:121–8; https://doi.org/10.1016/S0043-1648(03)00198-4HussainovaIEffect of microstructure on the erosive wear of titanium carbide-based cermets20032551218https://doi.org/10.1016/S0043-1648(03)00198-410.1016/S0043-1648(03)00198-4Search in Google Scholar
Zhu LD, Xue PS, Lan Q, Meng GR, Ren Y, Yang ZC, et al. Recent research and development status of laser cladding: A review. Opt Laser Technol. 2021;138:106915; https://doi.org/10.1016/j.optlastec.2021.106915ZhuLDXuePSLanQMengGRRenYYangZCRecent research and development status of laser cladding: A review2021138106915; https://doi.org/10.1016/j.optlastec.2021.10691510.1016/j.optlastec.2021.106915Search in Google Scholar
Majumdar JD, Galun R, Mordike BL, Manna I. Effect of laser surface melting on corrosion and wear resistance of a commercial magnesium alloy. Mat Sci Eng A-Struct. 2003;361(1–2):119–29; https://doi.org/10.1016/S0921-5093(03)00519-7MajumdarJDGalunRMordikeBLMannaIEffect of laser surface melting on corrosion and wear resistance of a commercial magnesium alloy20033611–211929https://doi.org/10.1016/S0921-5093(03)00519-710.1016/S0921-5093(03)00519-7Search in Google Scholar
Nurminena J, Näkki J, Vuoristo P. Microstructure and properties of hard and wear resistant MMC coatings deposited by laser cladding. Int J Refract Met H. 2009;27(2):472–8; https://doi.org/10.1016/j.ijrmhm.2008.10.008NurminenaJNäkkiJVuoristoPMicrostructure and properties of hard and wear resistant MMC coatings deposited by laser cladding20092724728https://doi.org/10.1016/j.ijrmhm.2008.10.00810.1016/j.ijrmhm.2008.10.008Search in Google Scholar
Huang L, Deng XT, Wang Q, Jia Y, Li CR, Wang ZD. Solidification and sliding wear behavior of low-alloy abrasion-resistant steel reinforced with TiC particles. Wear. 2020;458–459:203444; https://doi.org/10.1016/j.wear.2020.203444HuangLDengXTWangQJiaYLiCRWangZDSolidification and sliding wear behavior of low-alloy abrasion-resistant steel reinforced with TiC particles2020458–459203444; https://doi.org/10.1016/j.wear.2020.20344410.1016/j.wear.2020.203444Search in Google Scholar
Lin CL, Meehan PA. Morphological and elemental analysis of wear debris naturally formed in grease lubricated railway axle bearings. Wear. 2021;484–485:203994; https://doi.org/10.1016/j.wear.2021.203994LinCLMeehanPAMorphological and elemental analysis of wear debris naturally formed in grease lubricated railway axle bearings2021484–485203994; https://doi.org/10.1016/j.wear.2021.20399410.1016/j.wear.2021.203994Search in Google Scholar
Lu JZ, Cao J, Lu HF, Zhang LY, Luo KY. Wear properties and microstructural analyses of Fe-based coatings with various WC contents on H13 die steel by laser cladding. Surf Coat Technol. 2019;369:228–37; https://doi.org/10.1016/j.surfcoat.2019.04.063LuJZCaoJLuHFZhangLYLuoKYWear properties and microstructural analyses of Fe-based coatings with various WC contents on H13 die steel by laser cladding201936922837https://doi.org/10.1016/j.surfcoat.2019.04.06310.1016/j.surfcoat.2019.04.063Search in Google Scholar
Zhou J, Kong D. Microstructure, Tribological performance, and wear mechanism of Cr- and Mo-reinforced FeSiB coatings by laser cladding. J Mater Eng Perform. 2020;29:7428–44; https://doi.org/10.1007/s11665-020-05187-wZhouJKongDMicrostructure, Tribological performance, and wear mechanism of Cr- and Mo-reinforced FeSiB coatings by laser cladding202029742844https://doi.org/10.1007/s11665-020-05187-w10.1007/s11665-020-05187-wSearch in Google Scholar
Zhang PL, Li MC, Yan H, Chen JS, Yu ZS, Ye X. Microstructure evolution of Ni-Mo-Fe-Si quaternary metal silicide alloy composite coatings by laser cladding on pure Ni. J Alloy Compd. 2019;785:984–1000; https://doi.org/10.1016/j.jallcom.2019.01.191ZhangPLLiMCYanHChenJSYuZSYeXMicrostructure evolution of Ni-Mo-Fe-Si quaternary metal silicide alloy composite coatings by laser cladding on pure Ni20197859841000https://doi.org/10.1016/j.jallcom.2019.01.19110.1016/j.jallcom.2019.01.191Search in Google Scholar
Jiang PF, Zhang CH, Zhang S, Zhang JB, Chen J, Liu Y. Fabrication and wear behavior of TiC reinforced FeCoCrAlCu-based high entropy alloy coatings by laser surface alloying. Mater Chem Phys. 2020;255:123571; https://doi.org/10.1016/j.matchemphys.2020.123571JiangPFZhangCHZhangSZhangJBChenJLiuYFabrication and wear behavior of TiC reinforced FeCoCrAlCu-based high entropy alloy coatings by laser surface alloying2020255123571; https://doi.org/10.1016/j.matchemphys.2020.12357110.1016/j.matchemphys.2020.123571Search in Google Scholar
Dadoo A, Boutorabia SMA. Correlation between pulsed laser parameters and MC carbide morphology in H13 tool steel/TiC composite coating. Opt Laser Technol. 2020;127:106120; https://doi.org/10.1016/j.optlastec.2020.106120DadooABoutorabiaSMACorrelation between pulsed laser parameters and MC carbide morphology in H13 tool steel/TiC composite coating2020127106120; https://doi.org/10.1016/j.optlastec.2020.10612010.1016/j.optlastec.2020.106120Search in Google Scholar
Chen H, Lu YY, Sun YS, Wei YF, Wang XY, Liu DJ. Coarse TiC particles reinforced H13 steel matrix composites produced by laser cladding. Surf Coat Technol. 2020;395:125867; https://doi.org/10.1016/j.surfcoat.2020.125867ChenHLuYYSunYSWeiYFWangXYLiuDJCoarse TiC particles reinforced H13 steel matrix composites produced by laser cladding2020395125867; https://doi.org/10.1016/j.surfcoat.2020.12586710.1016/j.surfcoat.2020.125867Search in Google Scholar
Han TF, Xiao M, Zhang Y, Shen YF. Effects of graphite and graphene spatial structure on the TiC crystal structure and the properties of composite coatings. Surf Coat Technol. 2019;377:124909; https://doi.org/10.1016/j.surfcoat.2019.124909HanTFXiaoMZhangYShenYFEffects of graphite and graphene spatial structure on the TiC crystal structure and the properties of composite coatings2019377124909; https://doi.org/10.1016/j.surfcoat.2019.12490910.1016/j.surfcoat.2019.124909Search in Google Scholar
Tejero-Martin D, Bai MW, Mata J, Hussain T. Evolution of porosity in suspension thermal sprayed YSZ thermal barrier coatings through neutron scattering and image analysis techniques. J Eur Ceram Soc. 2021;41(12):6035–48; https://doi.org/10.1016/j.jeurceramsoc.2021.04.020Tejero-MartinDBaiMWMataJHussainTEvolution of porosity in suspension thermal sprayed YSZ thermal barrier coatings through neutron scattering and image analysis techniques20214112603548https://doi.org/10.1016/j.jeurceramsoc.2021.04.02010.1016/j.jeurceramsoc.2021.04.020Search in Google Scholar
Liu WH, Zeng W, Liu FS, Tang B, Liu QJ, Wang WD. The mechanical and electronic properties of o-Fe2C, h-Fe3C, t-Fe5C2, m-Fe5C2 and h-Fe7C3 compounds: First-principles calculations. Phys B. 2021;606:412825; https://doi.org/10.1016/j.physb.2021.412825LiuWHZengWLiuFSTangBLiuQJWangWDThe mechanical and electronic properties of o-Fe2C, h-Fe3C, t-Fe5C2, m-Fe5C2 and h-Fe7C3 compounds: First-principles calculations2021606412825; https://doi.org/10.1016/j.physb.2021.41282510.1016/j.physb.2021.412825Search in Google Scholar
Braic M, Balaceanu M, Parau AC, Dine M, Vladescu A. Investigation of multilayered TiSiC/NiC protective coatings. Vacuum. 2015;120(A):60–6; https://doi.org/10.1016/j.vacuum.2015.06.019BraicMBalaceanuMParauACDineMVladescuAInvestigation of multilayered TiSiC/NiC protective coatings2015120A606https://doi.org/10.1016/j.vacuum.2015.06.01910.1016/j.vacuum.2015.06.019Search in Google Scholar
Zhou JL, Kong DJ. Immersion corrosion and electrochemical performances of laser cladded FeSiB, FeSiBCr and FeSiBCrMo coatings in 3.5 wt% NaCl solution. Surf Coat Technol. 2020;383:125229; https://doi.org/10.1016/j.surfcoat.2019.125229ZhouJLKongDJImmersion corrosion and electrochemical performances of laser cladded FeSiB, FeSiBCr and FeSiBCrMo coatings in 3.5 wt% NaCl solution2020383125229; https://doi.org/10.1016/j.surfcoat.2019.12522910.1016/j.surfcoat.2019.125229Search in Google Scholar
Liu H, Liu J, Chen PJ, Yang HF. Microstructure and high temperature wear behaviour of in-situ TiC reinforced AlCoCrFeNi-based high-entropy alloy composite coatings fabricated by laser cladding. Opt Laser Technol. 2019;118:140–50; https://doi.org/10.1016/j.optlastec.2019.05.006LiuHLiuJChenPJYangHFMicrostructure and high temperature wear behaviour of in-situ TiC reinforced AlCoCrFeNi-based high-entropy alloy composite coatings fabricated by laser cladding201911814050https://doi.org/10.1016/j.optlastec.2019.05.00610.1016/j.optlastec.2019.05.006Search in Google Scholar
Zhu HM, Ouyang MN, Hu JP, Zhang JW, Qiu CJ. Design and development of TiC-reinforced 410 martensitic stainless steel coatings fabricated by laser cladding. Ceram Int. 2021;47:12505–13; https://doi.org/10.1016/j.ceramint.2021.01.108ZhuHMOuyangMNHuJPZhangJWQiuCJDesign and development of TiC-reinforced 410 martensitic stainless steel coatings fabricated by laser cladding2021471250513https://doi.org/10.1016/j.ceramint.2021.01.10810.1016/j.ceramint.2021.01.108Search in Google Scholar
Cui G, Han B, Zhao JB, Li MY. Comparative study on tribological properties of the sulfurizing layers on Fe, Ni and Co based laser cladding coatings. Tribol Int. 2019;134:36–49; https://doi.org/10.1016/j.triboint.2019.01.019CuiGHanBZhaoJBLiMYComparative study on tribological properties of the sulfurizing layers on Fe, Ni and Co based laser cladding coatings20191343649https://doi.org/10.1016/j.triboint.2019.01.01910.1016/j.triboint.2019.01.019Search in Google Scholar
Muhaffel F, Kaba M, Cempura G, Derin B, Kruk A, Atar E, et al. Influence of alumina and zirconia incorporations on the structure and wear resistance of titania-based MAO coatings. Surf Coat Technol. 2019;377:124900; https://doi.org/10.1016/j.surfcoat.2019.124900MuhaffelFKabaMCempuraGDerinBKrukAAtarEInfluence of alumina and zirconia incorporations on the structure and wear resistance of titania-based MAO coatings2019377124900; https://doi.org/10.1016/j.surfcoat.2019.12490010.1016/j.surfcoat.2019.124900Search in Google Scholar
Zhang Q, Wu ZT, Xu YX, Wang QM, Chen L, Kim KH. Improving the mechanical and anti-wear properties of AlTiN coatings by the hybrid arc and sputtering deposition. Surf Coat Technol. 2019;378:125022; https://doi.org/10.1016/j.surfcoat.2019.125022ZhangQWuZTXuYXWangQMChenLKimKHImproving the mechanical and anti-wear properties of AlTiN coatings by the hybrid arc and sputtering deposition2019378125022; https://doi.org/10.1016/j.surfcoat.2019.12502210.1016/j.surfcoat.2019.125022Search in Google Scholar
Larsson E, Westbroek R, Leckner J, Jacobson S, Rudolphi ÅK. Grease-lubricated tribological contacts-Influence of graphite, graphene oxide and reduced graphene oxide as lubricating additives in lithium complex (LiX)- and polypropylene (PP)-thickened greases. Wear. 2021;486–487:204107; https://doi.org/10.1016/j.wear.2021.204107LarssonEWestbroekRLecknerJJacobsonSRudolphiÅKGrease-lubricated tribological contacts-Influence of graphite, graphene oxide and reduced graphene oxide as lubricating additives in lithium complex (LiX)- and polypropylene (PP)-thickened greases2021486–487204107; https://doi.org/10.1016/j.wear.2021.20410710.1016/j.wear.2021.204107Search in Google Scholar
León-Patiño CA, Braulio-Sánchez M, Aguilar-Reyes EA, Bedolla-Becerril E, Bedolla-Jacuinde A. Dry sliding wear behavior of infiltrated particulate reinforced Ni/TiC composites. Wear. 2019;426–427:989–95; https://doi.org/10.1016/j.wear.2019.01.074León-PatiñoCABraulio-SánchezMAguilar-ReyesEABedolla-BecerrilEBedolla-JacuindeADry sliding wear behavior of infiltrated particulate reinforced Ni/TiC composites2019426–42798995https://doi.org/10.1016/j.wear.2019.01.07410.1016/j.wear.2019.01.074Search in Google Scholar
Zhou JL, Kong DJ. Effects of Al and Ti additions on corrosive-wear and electrochemical behaviors of laser cladded FeSiB coatings. Opt Laser Technol. 2019;124:105958; https://doi.org/10.1016/j.optlastec.2019.105958ZhouJLKongDJEffects of Al and Ti additions on corrosive-wear and electrochemical behaviors of laser cladded FeSiB coatings2019124105958; https://doi.org/10.1016/j.optlastec.2019.10595810.1016/j.optlastec.2019.105958Search in Google Scholar
Liu JS, Shi Y. Microstructure and wear behavior of laser-cladded Ni-based coatings decorated by graphite particles. Surf Coat Technol. 2021;412:127044; https://doi.org/10.1016/j.surfcoat.2021.127044LiuJSShiYMicrostructure and wear behavior of laser-cladded Ni-based coatings decorated by graphite particles2021412127044; https://doi.org/10.1016/j.surfcoat.2021.12704410.1016/j.surfcoat.2021.127044Search in Google Scholar
Shi JZ, Ge Y, Kong DJ. Microstructure, dry sliding friction performances and wear mechanism of laser cladded WC-10Co4Cr coating with different Al2O3 mass fractions. Surf Coat Technol. 2021;406:126749; https://doi.org/10.1016/j.surfcoat.2020.126749ShiJZGeYKongDJMicrostructure, dry sliding friction performances and wear mechanism of laser cladded WC-10Co4Cr coating with different Al2O3 mass fractions2021406126749; https://doi.org/10.1016/j.surfcoat.2020.12674910.1016/j.surfcoat.2020.126749Search in Google Scholar
Cai YC, Zhu LS, Cui Y, Shan MD, Li HJ, Xin Y, et al. Fracture and wear mechanisms of FeMnCrNiCo + x(TiC) composite high-entropy alloy cladding layers. Appl Surf Sci. 2021;543:148794; https://doi.org/10.1016/j.apsusc.2020.148794CaiYCZhuLSCuiYShanMDLiHJXinYFracture and wear mechanisms of FeMnCrNiCo + x(TiC) composite high-entropy alloy cladding layers2021543148794; https://doi.org/10.1016/j.apsusc.2020.14879410.1016/j.apsusc.2020.148794Search in Google Scholar