Otwarty dostęp

In silico and in vitro conductivity models of the left heart ventricle

Leonie Korn

Leonie Korn

Medical Information Technology, RWTH Aachen UniversityAachen, Germany
Wyszukaj tego autora
Sciendo|Google Scholar
Korn, Leonie
, 
Simon Lyra

Simon Lyra

Medical Information Technology, RWTH Aachen UniversityAachen, Germany
Wyszukaj tego autora
Sciendo|Google Scholar
Lyra, Simon
, 
Daniel Rüschen

Daniel Rüschen

Medical Information Technology, RWTH Aachen UniversityAachen, Germany
Wyszukaj tego autora
Sciendo|Google Scholar
Rüschen, Daniel
, 
Dmitry Telyshev

Dmitry Telyshev

  • Institute for Biomedical Systems, National Research University of Electronic TechnologyMoscow, Russian Federation
  • Institute for Bionic Technologies and Engineering, I. M. Sechenov First MSMUMoscow, Russian Federation
Wyszukaj tego autora
Sciendo|Google Scholar
Telyshev, Dmitry
, 
Steffen Leonhardt

Steffen Leonhardt

Medical Information Technology, RWTH Aachen UniversityAachen, Germany
Wyszukaj tego autora
Sciendo|Google Scholar
Leonhardt, Steffen
 oraz 
Marian Walter

Marian Walter

Medical Information Technology, RWTH Aachen UniversityAachen, Germany
Wyszukaj tego autora
Sciendo|Google Scholar
Walter, Marian
  
26 sie 2020
In silico and in vitro conductivity models of the left heart ventricle's Cover Image
O artykule
Poprzedni artykuł
Następny artykuł
Zacytuj
Pobierz okładkę
Data publikacji: 26 sie 2020
Zakres stron: 62 - 71
Otrzymano: 28 maj 2020
DOI: https://doi.org/10.2478/joeb-2020-0010
Słowa kluczowe
© 2020 Leonie Korn et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Fig. 1

a) CAD model with the inner wax-/ polyvinylalcohol-core; b) 3D-printed casting molds from polylactide; c) Resulting insulating ventricle from silicone; d) Resulting conductive ventricle from silicone and carbon.
a) CAD model with the inner wax-/ polyvinylalcohol-core; b) 3D-printed casting molds from polylactide; c) Resulting insulating ventricle from silicone; d) Resulting conductive ventricle from silicone and carbon.

Fig. 2

Schematic overview of the modular layout of the impedance measurement unit.
Schematic overview of the modular layout of the impedance measurement unit.

Fig. 3

Left: In silico FE model similar to the in vitro model from CAD files; middle: Mesh view of the FE model; right: Close-up of the ventricle's longitudinal cross-section with the ten-electrode catheter.
Left: In silico FE model similar to the in vitro model from CAD files; middle: Mesh view of the FE model; right: Close-up of the ventricle's longitudinal cross-section with the ten-electrode catheter.

Fig. 4

Left: Measured impedances in the conductive (red) and insulating silicone ventricle (blue) impedance; right: Simulated impedances in the conductive (red) and insulating ventricle (blue).
Left: Measured impedances in the conductive (red) and insulating silicone ventricle (blue) impedance; right: Simulated impedances in the conductive (red) and insulating ventricle (blue).

Fig. 5

Close-up of the current paths in the ventricle with insulating properties (left) and conductive properties (right).
Close-up of the current paths in the ventricle with insulating properties (left) and conductive properties (right).

Calibration network consisting of four resistances used for the AFE4300_

R00 R01 R10 R11
14,9 Ω 46,97 Ω 679 Ω 995 Ω
Język:
Angielski
Częstotliwość wydawania:
1 razy w roku
Dziedziny czasopisma:
Inżynieria, Bioinżynieria i inżynieria biomedyczna, Elektronika biomedyczna, Nauki biologiczne, Biofizyka, Medycyna, Inżynieria biomedyczna, Fizyka, Spektroskopia i metrologia
Kanał RSS czasopisma