Logowanie
Zarejestruj się
Zresetuj hasło
Publikuj i Dystrybuuj
Rozwiązania Wydawnicze
Rozwiązania Dystrybucyjne
Dziedziny
Architektura i projektowanie
Bibliotekoznawstwo i bibliologia
Biznes i ekonomia
Chemia
Chemia przemysłowa
Filozofia
Fizyka
Historia
Informatyka
Inżynieria
Inżynieria materiałowa
Językoznawstwo i semiotyka
Kulturoznawstwo
Literatura
Matematyka
Medycyna
Muzyka
Nauki farmaceutyczne
Nauki klasyczne i starożytne studia bliskowschodnie
Nauki o Ziemi
Nauki o organizmach żywych
Nauki społeczne
Prawo
Sport i rekreacja
Studia judaistyczne
Sztuka
Teologia i religia
Zagadnienia ogólne
Publikacje
Czasopisma
Książki
Materiały konferencyjne
Wydawcy
Blog
Kontakt
Wyszukiwanie
EUR
USD
GBP
Polski
English
Deutsch
Polski
Español
Français
Italiano
Koszyk
Home
Czasopisma
Journal of Electrical Bioimpedance
Tom 9 (2018): Zeszyt 1 (January 2018)
Otwarty dostęp
On the selection of excitation signals for the fast spectroscopy of electrical bioimpedance
Jaan Ojarand
Jaan Ojarand
oraz
Mart Min
Mart Min
| 31 gru 2018
Journal of Electrical Bioimpedance
Tom 9 (2018): Zeszyt 1 (January 2018)
O artykule
Poprzedni artykuł
Następny artykuł
Abstrakt
Artykuł
Ilustracje i tabele
Referencje
Autorzy
Artykuły w tym zeszycie
Podgląd
PDF
Zacytuj
Udostępnij
Data publikacji:
31 gru 2018
Zakres stron:
133 - 141
Otrzymano:
11 gru 2018
DOI:
https://doi.org/10.2478/joeb-2018-0018
Słowa kluczowe
Impedance measurement
,
bioimpedance
,
signal design
,
signal to noise ratio
,
optimization
© 2018 J. Ojarand, M. Min published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.
Fig.1
Simplified structure of the EBI spectroscopy system.
Fig.2
Waveform (a) and magnitude spectrum (b) of the pulse with relative duration t = (64/1000).
Fig.3
Waveform (a) and magnitude spectrum (b) of the exponentially modulated short chirp with relative duration t = 0.5.
Fig.4
Rectangular waveform (a) and its magnitude spectrum (b).
Fig.5
Waveforms (a) and magnitude spectrum (b) of the step waveform with a rise time of 1/500 of the signal period. Note that the first part of the time scale is magnified by 20. Diagonal hatch illustrates the energy content of the signal starting from zero and cross-hatches the energy content of the signal starting from -1.
Fig.6
Waveforms of the sinusoidal (a) and signum-chirp (b).
Fig.7
Relative deviation of RMS magnitudes of the frequency components from their mean values of the linear sinusoidal chirp with normalized frequencies in the range from 10 to 50.
Fig.8
Relative deviation of RMS magnitudes of frequency components from their mean values of the signum chirp with normalized frequencies in the range from 10 to 50.
Fig.9
Waveform of the 3-rd order MLBS (a) and its magnitude spectrum (b).
Fig.10
BMS waveform (a) and its magnitude spectrum (b) with four equally emphasized components (frequency bins 1, 3, 5, 7).
Fig.11
BMS (a) and its magnitude spectrum (b) with rising levels of components (frequency bins 1, 3, 5, 7).
Fig.12
CF of the optimized multisine signal with a consequent frequency distribution (i = 1,2,3,4 …. k), for a k in the range from 4 to 40. A green line level corresponds to the CF of a single sine wave.
Fig.13
Normalized RMS magnitudes of consecutively and logarithmically distributed frequency components of optimized multisines (MS, dashed lines) and BMS (solid lines) vs. a number of frequency decades a signal covers.