<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The work reports on the design of an area-efficient inductor-less low-noise CMOS transimpedance amplifier suitable for entry-level optical time-domain reflectometers. The work suggests a novel approach for implementing a programmable-gain in capacitive feedback TIA with an independent adjustment of the low- and high-frequency behavior using the input stage biasing impedance and one of the feedback capacitors. The approach addresses a typical noise problem of fast feed-forward or resistive feedback topologies while alleviating the trade-off of the key TIA performance indicators. A more accurate amplifier model is proposed which takes into account the effects due to capacitive isolation and both biasing circuits. Further modifications to the reference design are suggested including the PMOS-based implementation of the biasing circuit to address the voltage headroom issue. The circuit was implemented using a standard 180 nm CMOS process and operates from 1.8 V supply with the drawn current of 11.7 mA.</p>
</abstract>

The work reports on the design of an area-efficient inductor-less low-noise CMOS transimpedance amplifier suitable for entry-level optical time-domain reflectometers. The work suggests a novel approach for implementing a programmable-gain in capacitive feedback TIA with an independent adjustment of the low- and high-frequency behavior using the input stage biasing impedance and one of the feedback capacitors. The approach addresses a typical noise problem of fast feed-forward or resistive feedback topologies while alleviating the trade-off of the key TIA performance indicators. A more accurate amplifier model is proposed which takes into account the effects due to capacitive isolation and both biasing circuits. Further modifications to the reference design are suggested including the PMOS-based implementation of the biasing circuit to address the voltage headroom issue. The circuit was implemented using a standard 180 nm CMOS process and operates from 1.8 V supply with the drawn current of 11.7 mA.

A design methodology for programmable-gain low-noise TIA in CMOS

Department of Computer Science and Communications Technologies

Micro and Nanoelectronics Systems Design and Research Laboratory

Journal of Electrical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"A design methodology for programmable-gain low-noise TIA in CMOS"}

The work reports on the design of an area-efficient inductor-less low-noise CMOS transimpedance amplifier suitable for entry-level optical time-domain...

A design methodology for programmable-gain low-noise TIA in CMOS

Data publikacji: 15 lip 2021

Zakres stron: 147 - 157

Otrzymano: 16 sty 2021

DOI: https://doi.org/10.2478/jee-2021-0021

Słowa kluczowe
analog integrated circuits, broadband amplifiers, CMOS integrated circuits, optical time-domain reflectometry, transimpedance amplifier (TIA)

© 2021 Agata Romanova et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

A design methodology for programmable-gain low-noise TIA in CMOS

Data publikacji: 15 lip 2021

Zakres stron: 147 - 157

Otrzymano: 16 sty 2021

DOI: https://doi.org/10.2478/jee-2021-0021

Słowa kluczoweanalog integrated circuits, broadband amplifiers, CMOS integrated circuits, optical time-domain reflectometry, transimpedance amplifier (TIA)

© 2021 Agata Romanova et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Słowa kluczowe
analog integrated circuits, broadband amplifiers, CMOS integrated circuits, optical time-domain reflectometry, transimpedance amplifier (TIA)