<abstract xmlns="http://www.w3.org/1999/xhtml">In this study, the individual tree detection approach (ITD) was used to estimate forest stand variables, such as mean height, mean diameter, and total volume. Specifically, we applied the multisource-based method implemented in reFLex software (National Forest Centre, Slovakia) which uses all the information contained in the original point cloud and a priori information. For the accuracy assessment, four reference forest stands with different types of species mixture and the area of 7.5 ha were selected and measured. Furthermore, independent measurements of 1 372 trees were made for the construction of allometric models. The author’s ITD-based method provided slightly more accurate estimations for stands with substantial or moderate dominance of coniferous trees. However, no statistically significant effect of species mix on the overall accuracy was confirmed (<italic>p</italic> &lt; 0.05). The root mean square error did not exceed 1.9 m for mean height, 3.0 cm for mean diameter, and 12.88 m3 ha−1 for total volume.</abstract>

In this study, the individual tree detection approach (ITD) was used to estimate forest stand variables, such as mean height, mean diameter, and total volume. Specifically, we applied the multisource-based method implemented in reFLex software (National Forest Centre, Slovakia) which uses all the information contained in the original point cloud and a priori information. For the accuracy assessment, four reference forest stands with different types of species mixture and the area of 7.5 ha were selected and measured. Furthermore, independent measurements of 1 372 trees were made for the construction of allometric models. The author’s ITD-based method provided slightly more accurate estimations for stands with substantial or moderate dominance of coniferous trees. However, no statistically significant effect of species mix on the overall accuracy was confirmed (p < 0.05). The root mean square error did not exceed 1.9 m for mean height, 3.0 cm for mean diameter, and 12.88 m3 ha−1 for total volume.

Predicting forest stand variables from airborne LiDAR data using a tree detection method in Central European forests

National Forest Centre - Forest Research Institute Zvolen

Central European Forestry Journal

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

In this study, the individual tree detection approach (ITD) was used to estimate forest stand variables, such as mean height, mean diameter, and total volume....

Predicting forest stand variables from airborne LiDAR data using a tree detection method in Central European forests

Data publikacji: 20 lis 2019

Zakres stron: 191 - 197

DOI: https://doi.org/10.2478/forj-2019-0014

Słowa kluczowe
forest inventory, airborne laser scanning, individual tree detection, multisource-based method

© 2019 Ivan Sačkov et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Predicting forest stand variables from airborne LiDAR data using a tree detection method in Central European forests

Data publikacji: 20 lis 2019

Zakres stron: 191 - 197

DOI: https://doi.org/10.2478/forj-2019-0014

Słowa kluczoweforest inventory, airborne laser scanning, individual tree detection, multisource-based method

© 2019 Ivan Sačkov et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
forest inventory, airborne laser scanning, individual tree detection, multisource-based method