1. bookTom 17 (2021): Zeszyt 1 (June 2021)
Informacje o czasopiśmie
License
Format
Czasopismo
eISSN
2255-9159
Pierwsze wydanie
31 Jan 2013
Częstotliwość wydawania
2 razy w roku
Języki
Angielski
access type Otwarty dostęp

Modelling and Simulation of SCADA and PLC System for Power System Protection Laboratory

Data publikacji: 13 Sep 2021
Tom & Zeszyt: Tom 17 (2021) - Zeszyt 1 (June 2021)
Zakres stron: 19 - 25
Informacje o czasopiśmie
License
Format
Czasopismo
eISSN
2255-9159
Pierwsze wydanie
31 Jan 2013
Częstotliwość wydawania
2 razy w roku
Języki
Angielski
Abstract

The protection of power system is an essential trait in a huge network to efficiently detect and isolate the sections undergoing faults or abnormal behaviour. The key components of a protection scheme include circuit breakers, relays, switchgears and fuses which employ communication from one station to another to achieve high-speed tripping. The automation of these components at the laboratory level using programmable logic controller (PLC) along with supervisory control and data acquisition (SCADA) system owns paramount importance for intelligent decision making, sensing, actuating, monitoring and maintaining the record in the host server. This paper discusses such a technique for conventional power system protection laboratory at a new level of development to promote a control system through PLC and SCADA. The control system has indication of over and under values of voltage, load and frequency, which can trigger malfunctioning of equipment and must be rectified. Furthermore, ground fault and inverse current indication are added to the system for monitoring and controlling purposes. The proposed system enhances the efficiency and safety of the expensive equipment and the personnel to the next level and also introduces new standards of automated protection schemes for modern technical institutes.

Keywords

[1] K. I. Wong and T. U. Siaw, “PLC and SCADA Laboratory Experiments for a Final Year Instrumentation Course,” Int. J. Inf. Educ. Technol., vol. 5, no. 11, pp. 865–868, 2015. https://doi.org/10.7763/IJIET.2015.V5.62810.7763/IJIET.2015.V5.628 Search in Google Scholar

[2] E. R. Alphonsus and M. O. Abdullah, “A review on the applications of programmable logic controllers (PLCs),” Renew. Sustain. Energy Rev., vol. 60, pp. 1185–1205, 2016. https://doi.org/10.1016/j.rser.2016.01.02510.1016/j.rser.2016.01.025 Search in Google Scholar

[3] X. Yu and C. Singh, “A practical approach for integrated power system vulnerability analysis with protection failures,” IEEE Trans. Power Syst., vol. 19, no. 4, pp. 1811–1820, 2004. https://doi.org/10.1109/TPWRS.2004.83565610.1109/TPWRS.2004.835656 Search in Google Scholar

[4] C. P. Janssen, S. F. Donker, D. P. Brumby, and A. L. Kun, “History and future of human-automation interaction,” Int. J. Hum. Comput. Stud., vol. 131, pp. 99–107, 2019. https://doi.org/10.1016/j.ijhcs.2019.05.00610.1016/j.ijhcs.2019.05.006 Search in Google Scholar

[5] IEEE Standard for SCADA and Automation Systems, IEEE Std C37.1-2007, vol. 23, no. 6, 2007. Search in Google Scholar

[6] C. Lin, X. Min, and J. Junru, “Exploration on Educational Reform of Electrical Engineering and Automation Professional,” 2019 Asia-Pacific Conference on Advance in Education, Learning and Teaching (ACAELT 2019), pp. 1321–1325, 2019. Search in Google Scholar

[7] B. Ram and D. N. Vishwakarma, Power System Protection and Switchgear. McGraw-Hill Professional Publishing, 2011. Search in Google Scholar

[8] M. Eremia and M. Shahidehpour, Handbook of Electrical Power System Dynamics: Modeling, Stability, and Control. The Institute of Electrical and Electronics Engineers, Inc., 2013. https://doi.org/10.1002/978111851607210.1002/9781118516072 Search in Google Scholar

[9] M. S. Thomas, P. Kumar, and V. K. Chandna, “Design, development, and commissioning of a supervisory control and data acquisition (SCADA) laboratory for research and training,” IEEE Trans. Power Syst., vol. 19, no. 3, pp. 1582–1588, 2004. https://doi.org/10.1109/TPWRS.2004.82677010.1109/TPWRS.2004.826770 Search in Google Scholar

[10] J. F. M. valter Pinto, Silviano Rafeal, “PLC controlled industrial processes on-line simulator,” IEEE Int. Symp. Ind. Electrnics, 4–7 June, 2007. https://doi.org/10.1109/ISIE.2007.437508410.1109/ISIE.2007.4375084 Search in Google Scholar

[11] D. Li, Y. Serizawa, and M. Kiuchi, “Concept design for a Web-based Supervisory Control and Data-Acquisition (SCADA) system,” Proc. IEEE Power Eng. Soc. Transm. Distrib. Conf., vol. 1, ASIA PACIFIC, pp. 32–36, 2002. Search in Google Scholar

[12] R. Bayindir and Y. Cetinceviz, “A water pumping control system with a programmable logic controller (PLC) and industrial wireless modules for industrial plants-An experimental setup,” ISA Trans., vol. 50, no. 2, pp. 321–328, 2011. https://doi.org/10.1016/j.isatra.2010.10.00610.1016/j.isatra.2010.10.00621126739 Search in Google Scholar

[13] J. L. Vazquez-Gonzalez, J. Barrios-Aviles, A. Rosado-Muñoz, and R. Alejos-Palomares, “An industrial automation course: Common infrastructure for physical, virtual and remote laboratories for PLC programming,” Int. J. Online Biomed. Eng., vol. 14, no. 8, pp. 4–19, 2018. https://doi.org/10.3991/ijoe.v14i08.875810.3991/ijoe.v14i08.8758 Search in Google Scholar

[14] D. Cousineau, D. Mentré, and H. Inoue, “Automated deductive verification for ladder programming,” Proceedings F-IDE 2019, EPTCS, vol. 310, pp. 7–12, 2019. https://doi.org/10.4204/EPTCS.310.210.4204/EPTCS.310.2 Search in Google Scholar

[15] H. A. Abbas, “Future SCADA challenges and the promising solution: The agent-based SCADA,” Int. J. Crit. Infrastructures, vol. 10, no. 3/4, pp. 307–333, 2014. https://doi.org/10.1504/IJCIS.2014.06635410.1504/IJCIS.2014.066354 Search in Google Scholar

[16] R. K. Chauhan, M. L. Dewal, and K. Saini, “Utility of SCADA in power generation and distribution system,” Proc. 2010 3rd IEEE Int. Conf. Comput. Sci. Inf. Technol. ICCSIT 2010, vol. 6, pp. 648–652, 2010. Search in Google Scholar

[17] T. Adams, “SCADA System Fundamentals,” Course No: E01-007, pp. 3–5, 2014. Search in Google Scholar

[18] R. Slusariuc, L. Samoila, G. Popescu and A. D. Handra, “SCADA Systems Analysis For Industrial Procesess,” Annals of the University of Petrosani, Electrical Engineering, vol. 21, pp. 17–22, 2019. Search in Google Scholar

[19] H. Salih, H. Abdelwahab, and A. Abdallah, “Automation design for a syrup production line using Siemens PLC S7-1200 and TIA Portal software,” Proc. 2017 Int. Conf. Commun. Control. Comput. Electron. Eng. ICCCCEE 2017, pp. 5–9, 2017. https://doi.org/10.1109/ICCCCEE.2017.786670210.1109/ICCCCEE.2017.7866702 Search in Google Scholar

[20] S. L. Jämsä-Jounela, “Future trends in process automation,” IFAC Proc. Vol., vol. 40, no. 1, pp. 1–10, 2007. https://doi.org/10.3182/20070213-3-CU-2913.0000310.3182/20070213-3-CU-2913.00003 Search in Google Scholar

[21] S. SIMATIC, “S7-1200 Easy Book,” pp. 1–454, 2015. Search in Google Scholar

[22] L. Prenzel and J. Provost, “PLC Implementation of Symbolic, Modular Supervisory Controllers,” IFAC-PapersOnLine, vol. 51, no. 7, pp. 304–309, 2018. https://doi.org/10.1016/j.ifacol.2018.06.31710.1016/j.ifacol.2018.06.317 Search in Google Scholar

Polecane artykuły z Trend MD

Zaplanuj zdalną konferencję ze Sciendo