Zacytuj

[1] D. Patil, M. K. McDonough, J. M. Miller, B. Fahimi and P. T. Balsara, “Wireless Power Transfer for Vehicular Applications: Overview and Challenges,” in IEEE Transactions on Transportation Electrification, vol. 4, no. 1, pp. 3–37, March 2018. https://doi.org/10.1109/TTE.2017.278062710.1109/TTE.2017.2780627Search in Google Scholar

[2] R. Bosshard, J. W. Kolar, J. Mühlethaler, I. Stevanović, B. Wunsch and F. Canales, “Modeling and η-α-Pareto Optimization of Inductive Power Transfer Coils for Electric Vehicles,” in IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 3, no. 1, pp. 50–64, March 2015. https://doi.org/10.1109/JESTPE.2014.231130210.1109/JESTPE.2014.2311302Search in Google Scholar

[3] R. Bosshard, J. MµHlethaler, J. W. Kolar, and I. Stevanovic, “Optimized magnetic design for inductive power transfer coils,” in Proc. 28th APEC, 2013, pp. 1812–1819. https://doi.org/10.1109/APEC.2013.652054110.1109/APEC.2013.6520541Search in Google Scholar

[4] J. Cho, J. Sun, H. Kim, J. Fan, Y. Lu and S. Pan, “Coil design for 100 KHz and 6.78 MHz WPT system: Litz and solid wires and winding methods,” 2017 IEEE International Symposium on Electromagnetic Compatibility & Signal/Power Integrity (EMCSI), Washington, DC, 2017, pp. 803–806. https://doi.org/10.1109/ISEMC.2017.807797710.1109/ISEMC.2017.8077977Search in Google Scholar

[5] W. Zhang and C. C. Mi, “Compensation Topologies of High-Power Wireless Power Transfer Systems,” in IEEE Transactions on Vehicular Technology, vol. 65, no. 6, pp. 4768–4778, June 2016. https://doi.org/10.1109/TVT.2015.245429210.1109/TVT.2015.2454292Search in Google Scholar

[6] M. Hassan Ameri, A. Y. Varjani, and M. Mohamadian, “A New Maximum Inductive Power Transmission Capacity Tracking Method,” Journal of Power Electronics, November 2016, vol. 16, no. 6. pp. 2202–2211. https://doi.org/10.6113/JPE.2016.16.6.220210.6113/JPE.2016.16.6.2202Search in Google Scholar

[7] S. Nutwong, A. Sangswang and S. Naetiladdanon, “Output voltage control of the SP topology IPT system using a primary side controller,” 2016 13th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON), Chiang Mai, 2016, pp. 1–5. https://doi.org/10.1109/ECTICon.2016.756139310.1109/ECTICon.2016.7561393Search in Google Scholar

[8] K. Song, Z. Li, J. Jiang and C. Zhu, “Constant Current/Voltage Charging Operation for Series–Series and Series–Parallel Compensated Wireless Power Transfer Systems Employing Primary-Side Controller,” in IEEE Transactions on Power Electronics, vol. 33, no. 9, pp. 8065–8080, Sept. 2018.Search in Google Scholar

[9] V. Shevchenko, O. Husev, R. Strzelecki, B. Pakhaliuk, N. Poliakov and N. Strzelecka, “Compensation Topologies in IPT Systems: Standards, Requirements, Classification, Analysis, Comparison and Application,” in IEEE Access, vol. 7, pp. 120559–120580, 2019. https://doi.org/10.1109/ACCESS.2019.293789110.1109/ACCESS.2019.2937891Search in Google Scholar

[10] M. A. Houran, X. Yang, W. Chen, “Magnetically Coupled Resonance WPT: Review of Compensation Topologies, Resonator Structures with Misalignment, and EMI Diagnostics,” Electronics, vol. 7, no. 11, 2018, 296. https://doi.org/10.3390/electronics711029610.3390/electronics7110296Search in Google Scholar

[11] H. Movagharnejad and A. Mertens, “Design metrics of compensation methods for contactless charging of electric vehicles,” 2017 19th European Conference on Power Electronics and Applications (EPE’17 ECCE Europe), Warsaw, 2017, pp. P.1–P.10. https://doi.org/10.23919/EPE17ECCEEurope.2017.809940310.23919/EPE17ECCEEurope.2017.8099403Search in Google Scholar

[12] I. Kondratenko, A. Zhyltsov and A. Bereziuk, “Electromagnetic field of the three-phase cylindrical inductor if it runs off with frequency converter in non-stationary modes,” 2017 IEEE International Young Scientists Forum on Applied Physics and Engineering (YSF), Lviv, 2017, pp. 247–250. https://doi.org/10.1109/YSF.2017.812666410.1109/YSF.2017.8126664Search in Google Scholar

[13] “Electromagnetics. Electromagnetic, Electronics, Thermal and Electromechanical Simulation”. [Online]. Available: https://www.ansys.com/products/electronicsSearch in Google Scholar

[14] R. Bosshard, J. W. Kolar and B. Wunsch, “Accurate finite-element modeling and experimental verification of inductive power transfer coil design,” 2014 I17 Applied Power Electronics Conference and Exposition APEC 2014, Fort Worth, TX, 2014, pp. 1648–1653. https://doi.org/10.1109/APEC.2014.680352710.1109/APEC.2014.6803527Search in Google Scholar

[15] V. Shevchenko, O. Karlov, O. Husev, I. Kondratenko and B. Pakhaliuk, “Coil Design for Wireless Power Transfer with Series-Parallel Compensation” in Proc. of the 2019 IEEE 2nd Ukraine Conference on Electrical and Computer Engineering (UKRCON), July, 2019. https://doi.org/10.1109/UKRCON.2019.887987710.1109/UKRCON.2019.8879877Search in Google Scholar

[16] H. Li, J. Li, K. Wang, W. Chen and X. Yang, “A Maximum Efficiency Point Tracking Control Scheme for Wireless Power Transfer Systems Using Magnetic Resonant Coupling,” in IEEE Transactions on Power Electronics, vol. 30, no. 7, pp. 3998–4008, July 2015. https://doi.org/10.1109/TPEL.2014.234953410.1109/TPEL.2014.2349534Search in Google Scholar

[17] W. X. Zhong and S. Y. R. Hui, “Maximum energy efficiency tracking for wireless power transfer systems,” IEEE Trans. Power Electron., vol. 30, no. 7, pp. 4025–4034, Jul. 2015. https://doi.org/10.1109/TPEL.2014.235149610.1109/TPEL.2014.2351496Search in Google Scholar

[18] J. Yin, D. Lin, C. Lee, and S. Y. R. Hui, “A systematic approach for load monitoring and power control in wireless power transfer systems without any direct output measurement,” IEEE Trans. Power Electron., vol. 30, no. 3, pp. 1657–1667, Mar. 2015. https://doi.org/10.1109/TPEL.2014.231718310.1109/TPEL.2014.2317183Search in Google Scholar

[19] W. Zhong and S. Y. R. Hui, “Maximum Energy Efficiency Operation of Series-Series Resonant Wireless Power Transfer Systems Using On-Off Keying Modulation,” in IEEE Transactions on Power Electronics, vol. 33, no. 4, pp. 3595–3603, April 2018. https://doi.org/10.1109/TPEL.2017.270934110.1109/TPEL.2017.2709341Search in Google Scholar

eISSN:
2255-9159
Język:
Angielski
Częstotliwość wydawania:
2 razy w roku
Dziedziny czasopisma:
Engineering, Introductions and Overviews, other