Otwarty dostęp

Effect of Biobutanol-Sunflower Oil-Diesel Fuel Blends on Combustion Characteristics of Compression Ignition Engine


Zacytuj

ALDHAIDHAWI, M. – CHIRIAC, R. – BADESCU, V. 2017. Ignition delay, combustion and emission characteristics of diesel engine fueled with rapeseed biodiesel – A literature review. In Renewable and Sustainable Energy Reviews, vol. 73, pp. 178–186.10.1016/j.rser.2017.01.129Search in Google Scholar

ATMANLI, A. – ILERI, E. – YÜKSEL, B. 2015. Effects of higher ratios of n-butanol addition to diesel-vegetable oil blends on performance and exhaust emissions of a diesel engine. In Journal of the Energy Institute, vol. 88, no. 3, pp. 209–220.10.1016/j.joei.2014.09.008Search in Google Scholar

BABU, V. M. – MURTHY, M. – RAO, A. P. 2017. Butanol and pentanol: The promising biofuels for CI engines – A review. In Renewable and Sustainable Energy Reviews, vol. 78, pp. 1068–1088.10.1016/j.rser.2017.05.038Search in Google Scholar

BELOEV, I. – GABROVSKA-EVSTATIEVA, K. – EVSTATIEV, B. 2017. Compensation of CO2 emissions from petrol stations with photovoltaic parks: Cost-benefit and risk analysis. In Acta Technologica Agriculturae, vol. 20, no. 4, pp. 85–90.10.1515/ata-2017-0017Search in Google Scholar

BIRZIETIS, G. – PIRS, V. – DUKULIS, I. – GAILIS, M. 2017. Effect of commercial diesel fuel and hydrotreated vegetable oil blend on automobile performance. In Agronomy Research, vol. 15, no. S1, pp. 964–970.Search in Google Scholar

CISEK, J. – SZLACHTA, Z. 2001. Correlation between autoignition delay and cetane number of rape fuels at varied diesel engine work conditions. In Journal of Kones. Combustion Engines, vol. 8, no. 1–2, pp. 110–115.Search in Google Scholar

ČSN DIN 51900-1: 2014. Testing of solid and liquid fuels – Determination of the gross calorific value by the bomb calorimeter and calculation of the net calorific value – Part 1: General information, basic equipment and method.Search in Google Scholar

ČSN DIN 51900-2: 2014. Testing of solid and liquid fuels – Determination of the gross calorific value by the bomb calorimeter and calculation of the net calorific value – Part 2: Method using isoperibol or static jacket calorimeter.Search in Google Scholar

EN 590: 2013. Automotive fuels. Diesel. Requirements and test methods.Search in Google Scholar

ESTEBAN, B. – RIBA, J. R. – BAQUERO, G. – RIUS, A. – PUIG, R. 2012. Temperature dependence of density and viscosity of vegetable oils. In Biomass and Bioenergy, vol. 42, pp. 164–171.10.1016/j.biombioe.2012.03.007Search in Google Scholar

FRANCO, Z. – NGUYEN, Q. D. 2011. Flow properties of vegetable oil-diesel fuel blends. In Fuel, vol. 90, pp. 838–843.10.1016/j.fuel.2010.09.044Search in Google Scholar

GENG, P. – CAO, E. – TAN, Q. – WEI, L. 2017. Effects of alternative fuels on the combustion characteristics and emission products from diesel engines: A review. In Renewable and Sustainable Energy Reviews, vol. 71, pp. 523–534.10.1016/j.rser.2016.12.080Search in Google Scholar

HEYWOOD, J. B. 1988. Internal Combustion Engine Fundamentals. London: McGraw-Hill, 930 pp. ISBN 0-07-028637-X.Search in Google Scholar

HÖNIG, V. – ORSÁK, M. – PEXA, M. – LINHART, Z. 2015b. The distillation characteristics of automotive gasoline containing biobutanol, bioethanol and the influence of the oxygenates. In Agronomy Research, vol. 13, no. 2, pp. 558–567.Search in Google Scholar

HÖNIG, V. – SMRČKA, L. – ILVES, R. – KÜÜT, A. 2015a. Adding biobutanol to diesel fuel and impact on fuel blend parametres. In Agronomy Research, vol. 13, no. 5, pp. 1227–1233.Search in Google Scholar

HOW, H. G. – MASJUKI, H. H. – KALAM, M. A. – TEOH, Y. H. 2018. Influence of injection timing and split injection strategies on performance, emissions, and combustion characteristics of diesel engine fueled with biodiesel blended fuels. In Fuel, vol. 213, pp. 106–114.10.1016/j.fuel.2017.10.102Search in Google Scholar

IMTENAN, S. – MASJUKI, H. – VARMAN, M. – RIZWANUL FATTAH, I. – SAJJAD, H. – ARBAB, M. 2015. Effect of n-butanol and diethyl ether as oxygenated additives on combustion-emission-performance characteristics of a multiple cylinder diesel engine fuelled with diesel-jatropha biodiesel blend. In Energy Conversion and Management, vol. 94, pp. 84–94.10.1016/j.enconman.2015.01.047Search in Google Scholar

ISO 8178-4: 2017. Reciprocating internal combustion engines – Exhaust emission measurement – Part 4: Steady-state and transient test cycles for different engine applications.Search in Google Scholar

MASJUKI, H. H. – KALAM, M. A. – MALEQUE, M. A. – KUBO, A. – NONAKA, T. 2001. Performance, emissions and wear characteristics of an indirect injection diesel engine using coconut oil blended fuel. In Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 215 no. 3, pp. 393–404.10.1243/0954407011525728Search in Google Scholar

MAT, S. C. – IDROAS, M. Y. – HAMID, M. F. – ZAINAL, Z. A. 2018. Performance and emissions of straight vegetable oils and its blends as a fuel in diesel engine: A review. In Renewable and Sustainable Energy Reviews, vol. 82, pp. 808–823.10.1016/j.rser.2017.09.080Search in Google Scholar

MÜLLER, M. – ŠLEGER, V. – PEXA, M. – MAŘÍK, J. – MIZERA, Č. 2015. Evaluation of stability of elastomer packing exposed to influence of various biofuels. In Agronomy Research vol. 13, no. 2, pp. 604–612.Search in Google Scholar

OZSEZEN, A. N. – CANAKCI, M. – SAYIN, C. 2008. Effects of biodiesel from used frying palm oil on the performance, injection, and combustion characteristics of an indirect injection diesel engine. In Energy & Fuels, vol. 22, no. 4, pp. 1297–1305.10.1021/ef700447zSearch in Google Scholar

RAKOPOULOS, C. D. 2013. Combustion and emissions of cottonseed oil and its bio-diesel in blends with either n-butanol or diethyl ether in HSDI diesel engine. In Fuel, vol. 105, pp. 603–613.10.1016/j.fuel.2012.08.023Search in Google Scholar

SATHIYAMOORTHI, R. – SANKARANARAYANAN, G. 2017. The effects of using ethanol as additive on the combustion and emissions of a direct injection diesel engine fuelled with neat lemongrass oil-diesel fuel blend. In Renewable Energy, vol. 101, pp. 747–756.10.1016/j.renene.2016.09.044Search in Google Scholar

SHAH, P. R. – GANESH, A. 2016. A comparative study on influence of fuel additives with edible and non-edible vegetable oil based on fuel characterization and engine characteristics of diesel engine. In Applied Thermal Engineering, vol. 102, pp. 800–812.10.1016/j.applthermaleng.2016.03.128Search in Google Scholar

SHAH, P. R. – GAITONDE, U. N. – GANESH, A. 2018. Influence of soy-lecithin as bio-additive with straight vegetable oil on CI engine characteristics. In Renewable Energy, vol. 115, pp. 685–696.10.1016/j.renene.2017.09.013Search in Google Scholar

SHARON, H. – JAI, P. – RAM, S. – FERNANDO, K. J. – MURALI, S. – MUTHUSAMY, R. 2013. Fueling a stationary direct injection diesel engine with diesel-used palm oil-butanol blends – An experimental study. In Energy Conversion and Management, vol. 73, pp. 95–105.10.1016/j.enconman.2013.04.027Search in Google Scholar

TKÁČ, Z. – ČORNÁK, Š. – CVIKLOVIČ, V. – KOSIBA, J. – GLOS, J. – JABLONICKÝ, J. – BERNÁT, R. 2017. Research of biodegradable fluid impacts on operation of tractor hydraulic system. In Acta Technologica Agriculturae, vol. 20, no. 2, pp. 42–45.10.1515/ata-2017-0008Search in Google Scholar

TULÍK, J. – KOSIBA, J. – STANČÍK, B. – ŠTULAJTER, I. 2014. Pollution analysis of new synthetic biodegradable fluid during durability test of hydrostatic pumps. In Acta Technologica Agriculturae, vol. 17, no. 1, pp. 24–28.10.2478/ata-2014-0006Search in Google Scholar

TUTAK, W. – LUKÁCS, K. – SZWAJA, S. – BERECZKY, Á. 2015. Alcohol–diesel fuel combustion in the compression ignition engine, In Fuel, vol. 154, pp. 196–206.10.1016/j.fuel.2015.03.071Search in Google Scholar

XIAO, J. – JIA, M. – CHANG, Y. – LI, Y. – XU, Z. – XU, G. – LIU, H. – WANG, T. 2017. Numerical optimization and comparative study of n-butanol concentration stratification combustion and n-butanol/diesel reactivity stratification combustion for advanced compression ignition (CI) engine. In Fuel, vol. 213, pp. 83–97.10.1016/j.fuel.2017.10.104Search in Google Scholar

eISSN:
1338-5267
Język:
Angielski
Częstotliwość wydawania:
4 razy w roku
Dziedziny czasopisma:
Engineering, Introductions and Overviews, other