[ALDHAIDHAWI, M. – CHIRIAC, R. – BADESCU, V. 2017. Ignition delay, combustion and emission characteristics of diesel engine fueled with rapeseed biodiesel – A literature review. In Renewable and Sustainable Energy Reviews, vol. 73, pp. 178–186.10.1016/j.rser.2017.01.129]Search in Google Scholar
[ATMANLI, A. – ILERI, E. – YÜKSEL, B. 2015. Effects of higher ratios of n-butanol addition to diesel-vegetable oil blends on performance and exhaust emissions of a diesel engine. In Journal of the Energy Institute, vol. 88, no. 3, pp. 209–220.10.1016/j.joei.2014.09.008]Search in Google Scholar
[BABU, V. M. – MURTHY, M. – RAO, A. P. 2017. Butanol and pentanol: The promising biofuels for CI engines – A review. In Renewable and Sustainable Energy Reviews, vol. 78, pp. 1068–1088.10.1016/j.rser.2017.05.038]Search in Google Scholar
[BELOEV, I. – GABROVSKA-EVSTATIEVA, K. – EVSTATIEV, B. 2017. Compensation of CO2 emissions from petrol stations with photovoltaic parks: Cost-benefit and risk analysis. In Acta Technologica Agriculturae, vol. 20, no. 4, pp. 85–90.10.1515/ata-2017-0017]Search in Google Scholar
[BIRZIETIS, G. – PIRS, V. – DUKULIS, I. – GAILIS, M. 2017. Effect of commercial diesel fuel and hydrotreated vegetable oil blend on automobile performance. In Agronomy Research, vol. 15, no. S1, pp. 964–970.]Search in Google Scholar
[CISEK, J. – SZLACHTA, Z. 2001. Correlation between autoignition delay and cetane number of rape fuels at varied diesel engine work conditions. In Journal of Kones. Combustion Engines, vol. 8, no. 1–2, pp. 110–115.]Search in Google Scholar
[ČSN DIN 51900-1: 2014. Testing of solid and liquid fuels – Determination of the gross calorific value by the bomb calorimeter and calculation of the net calorific value – Part 1: General information, basic equipment and method.]Search in Google Scholar
[ČSN DIN 51900-2: 2014. Testing of solid and liquid fuels – Determination of the gross calorific value by the bomb calorimeter and calculation of the net calorific value – Part 2: Method using isoperibol or static jacket calorimeter.]Search in Google Scholar
[EN 590: 2013. Automotive fuels. Diesel. Requirements and test methods.]Search in Google Scholar
[ESTEBAN, B. – RIBA, J. R. – BAQUERO, G. – RIUS, A. – PUIG, R. 2012. Temperature dependence of density and viscosity of vegetable oils. In Biomass and Bioenergy, vol. 42, pp. 164–171.10.1016/j.biombioe.2012.03.007]Search in Google Scholar
[FRANCO, Z. – NGUYEN, Q. D. 2011. Flow properties of vegetable oil-diesel fuel blends. In Fuel, vol. 90, pp. 838–843.10.1016/j.fuel.2010.09.044]Search in Google Scholar
[GENG, P. – CAO, E. – TAN, Q. – WEI, L. 2017. Effects of alternative fuels on the combustion characteristics and emission products from diesel engines: A review. In Renewable and Sustainable Energy Reviews, vol. 71, pp. 523–534.10.1016/j.rser.2016.12.080]Search in Google Scholar
[HEYWOOD, J. B. 1988. Internal Combustion Engine Fundamentals. London: McGraw-Hill, 930 pp. ISBN 0-07-028637-X.]Search in Google Scholar
[HÖNIG, V. – ORSÁK, M. – PEXA, M. – LINHART, Z. 2015b. The distillation characteristics of automotive gasoline containing biobutanol, bioethanol and the influence of the oxygenates. In Agronomy Research, vol. 13, no. 2, pp. 558–567.]Search in Google Scholar
[HÖNIG, V. – SMRČKA, L. – ILVES, R. – KÜÜT, A. 2015a. Adding biobutanol to diesel fuel and impact on fuel blend parametres. In Agronomy Research, vol. 13, no. 5, pp. 1227–1233.]Search in Google Scholar
[HOW, H. G. – MASJUKI, H. H. – KALAM, M. A. – TEOH, Y. H. 2018. Influence of injection timing and split injection strategies on performance, emissions, and combustion characteristics of diesel engine fueled with biodiesel blended fuels. In Fuel, vol. 213, pp. 106–114.10.1016/j.fuel.2017.10.102]Search in Google Scholar
[IMTENAN, S. – MASJUKI, H. – VARMAN, M. – RIZWANUL FATTAH, I. – SAJJAD, H. – ARBAB, M. 2015. Effect of n-butanol and diethyl ether as oxygenated additives on combustion-emission-performance characteristics of a multiple cylinder diesel engine fuelled with diesel-jatropha biodiesel blend. In Energy Conversion and Management, vol. 94, pp. 84–94.10.1016/j.enconman.2015.01.047]Search in Google Scholar
[ISO 8178-4: 2017. Reciprocating internal combustion engines – Exhaust emission measurement – Part 4: Steady-state and transient test cycles for different engine applications.]Search in Google Scholar
[MASJUKI, H. H. – KALAM, M. A. – MALEQUE, M. A. – KUBO, A. – NONAKA, T. 2001. Performance, emissions and wear characteristics of an indirect injection diesel engine using coconut oil blended fuel. In Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 215 no. 3, pp. 393–404.10.1243/0954407011525728]Search in Google Scholar
[MAT, S. C. – IDROAS, M. Y. – HAMID, M. F. – ZAINAL, Z. A. 2018. Performance and emissions of straight vegetable oils and its blends as a fuel in diesel engine: A review. In Renewable and Sustainable Energy Reviews, vol. 82, pp. 808–823.10.1016/j.rser.2017.09.080]Search in Google Scholar
[MÜLLER, M. – ŠLEGER, V. – PEXA, M. – MAŘÍK, J. – MIZERA, Č. 2015. Evaluation of stability of elastomer packing exposed to influence of various biofuels. In Agronomy Research vol. 13, no. 2, pp. 604–612.]Search in Google Scholar
[OZSEZEN, A. N. – CANAKCI, M. – SAYIN, C. 2008. Effects of biodiesel from used frying palm oil on the performance, injection, and combustion characteristics of an indirect injection diesel engine. In Energy & Fuels, vol. 22, no. 4, pp. 1297–1305.10.1021/ef700447z]Search in Google Scholar
[RAKOPOULOS, C. D. 2013. Combustion and emissions of cottonseed oil and its bio-diesel in blends with either n-butanol or diethyl ether in HSDI diesel engine. In Fuel, vol. 105, pp. 603–613.10.1016/j.fuel.2012.08.023]Search in Google Scholar
[SATHIYAMOORTHI, R. – SANKARANARAYANAN, G. 2017. The effects of using ethanol as additive on the combustion and emissions of a direct injection diesel engine fuelled with neat lemongrass oil-diesel fuel blend. In Renewable Energy, vol. 101, pp. 747–756.10.1016/j.renene.2016.09.044]Search in Google Scholar
[SHAH, P. R. – GANESH, A. 2016. A comparative study on influence of fuel additives with edible and non-edible vegetable oil based on fuel characterization and engine characteristics of diesel engine. In Applied Thermal Engineering, vol. 102, pp. 800–812.10.1016/j.applthermaleng.2016.03.128]Search in Google Scholar
[SHAH, P. R. – GAITONDE, U. N. – GANESH, A. 2018. Influence of soy-lecithin as bio-additive with straight vegetable oil on CI engine characteristics. In Renewable Energy, vol. 115, pp. 685–696.10.1016/j.renene.2017.09.013]Search in Google Scholar
[SHARON, H. – JAI, P. – RAM, S. – FERNANDO, K. J. – MURALI, S. – MUTHUSAMY, R. 2013. Fueling a stationary direct injection diesel engine with diesel-used palm oil-butanol blends – An experimental study. In Energy Conversion and Management, vol. 73, pp. 95–105.10.1016/j.enconman.2013.04.027]Search in Google Scholar
[TKÁČ, Z. – ČORNÁK, Š. – CVIKLOVIČ, V. – KOSIBA, J. – GLOS, J. – JABLONICKÝ, J. – BERNÁT, R. 2017. Research of biodegradable fluid impacts on operation of tractor hydraulic system. In Acta Technologica Agriculturae, vol. 20, no. 2, pp. 42–45.10.1515/ata-2017-0008]Search in Google Scholar
[TULÍK, J. – KOSIBA, J. – STANČÍK, B. – ŠTULAJTER, I. 2014. Pollution analysis of new synthetic biodegradable fluid during durability test of hydrostatic pumps. In Acta Technologica Agriculturae, vol. 17, no. 1, pp. 24–28.10.2478/ata-2014-0006]Search in Google Scholar
[TUTAK, W. – LUKÁCS, K. – SZWAJA, S. – BERECZKY, Á. 2015. Alcohol–diesel fuel combustion in the compression ignition engine, In Fuel, vol. 154, pp. 196–206.10.1016/j.fuel.2015.03.071]Search in Google Scholar
[XIAO, J. – JIA, M. – CHANG, Y. – LI, Y. – XU, Z. – XU, G. – LIU, H. – WANG, T. 2017. Numerical optimization and comparative study of n-butanol concentration stratification combustion and n-butanol/diesel reactivity stratification combustion for advanced compression ignition (CI) engine. In Fuel, vol. 213, pp. 83–97.10.1016/j.fuel.2017.10.104]Search in Google Scholar