This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Talukdar S N, Apt J, Ilic M, et al., “Cascading Failures: Survival versus Prevention”, Electricity Journal, Vol.16, No.9, 2003, pp. 25-31.10.1016/j.tej.2003.09.003Search in Google Scholar
White D, Roschelle A, Peterson P, et al., “The 2003 Blackout: Solutions that Won’t Cost a Fortune”, Electricity Journal, Vol.16, No.9, 2003, pp. 43-53.10.1016/j.tej.2003.10.002Search in Google Scholar
Leung E. Surge protection for power grids. IEEE Spectrum, 1997, 34-34.10.1109/6.609812Search in Google Scholar
Ibrahim E S. “Electromagnetic fault current limiter”, Electric Power Systems Research, Vol.42, No.3, 1997, pp. 189–194.10.1016/S0378-7796(96)01204-7Search in Google Scholar
V.H, Porter J W., “Fault Current Limiters an Overview of EPRI Research”, IEEE Transactions on Power Apparatus & Systems, pas-99, No.5, 1980, pp.1964-1969.10.1109/TPAS.1980.319822Search in Google Scholar
Onishi T, Aizawa N, Yamagata A, et al., “Stability of a shorted Nb3Sn coil cooled by a refrigerator for a magnetic shield type fault current limiter”, IEEE Transactions on Applied Superconductivity, Vol.10, No.1, 2000, pp. 845-848.10.1109/77.828363Search in Google Scholar
Keilin V, Kovalev I, Kruglov S, et al., “Model of HTS three-phase saturated core fault current limiter”, IEEE Transactions on Applied Superconductivity, Vol.10, No.1, 2000, pp. 836-83910.1109/77.828361Search in Google Scholar
Mukhopadhyay S C., “Synthesis and implementation of magnetic current limiter”, Doctor of Engineering thesis, Faculty of Engineering, Kanazawa University, Japan, March Vol. 2000, 6, pp. 294-298.Search in Google Scholar
Dawson F P, Mukhopadhyay F P, Iwahara M, et al., “Analysis, design and experimental results for a passive current limiting device”, Electric Power Applications, IEE Proceedings -, Vol.146, No.3, 1999,pp.309 - 316.10.1049/ip-epa:19990292Search in Google Scholar
Iwahara M, Mukhopadhyay S C, Fujiwara N, et al., “Development of passive fault current limiter in parallel biasing mode”, Magnetics IEEE Transactions on, Vol. 35, No.5, 1999, pp. 3523-3525.10.1109/20.800577Search in Google Scholar
Mukhopadhyay S C, Dawson F P, Iwahara M, et al., “A novel compact magnetic current limiter for three phase application”, Magnetics IEEE Transactions on, Vol.36, No. 5, 2000, pp. 3568-3570.10.1109/20.908900Search in Google Scholar
Malkin P, Klaus D., “Cap that current”, Iee Review, Vol.47, No.2, 2001, pp. 41-45.10.1049/ir:20010206Search in Google Scholar
Paul W, Lakner M, Rhyner J, et al., “Test of 1.2MVA High-T_c Superconducting Fault Current Limiter”, Superconductor Science & Technology, 1997, Vol.10, pp. 914-918.10.1088/0953-2048/10/12/011Search in Google Scholar
Kim J T, Kim W S, Kim S H, et al., “Analysis of AC losses in HTS pancake windings for transformer according to the operating temperature”, IEEE Transactions on Magnetics, Vol.41, No.5, 2005, pp.1888-1891.10.1109/TMAG.2005.846277Search in Google Scholar
Steurer M, Brechna H, Frohlich K., “A nitrogen gas cooled, hybrid, high temperature superconducting fault current limiter”, Applied Superconductivity IEEE Transactions on, Vol.10, No.1, 2000, pp. 840-844.10.1109/77.828362Search in Google Scholar
Jiang Xu, Huanyan Qian, Wenhao Ying, et al., “A deployment algorithm for mobile wireless sensor networks based on the electrostatic field theory”, The International Journal on Smart Sensing and Intelligent Systems, Vol.8, No.5, 2015, pp. 516-537.10.21307/ijssis-2017-770Search in Google Scholar
Qiuchan Bai, Chunxia Jin., “Image fusion and recognition based on compressed sensing theory”, The International Journal on Smart Sensing and Intelligent Systems, Vol.8, No.5, 2015, pp. 159-180.10.21307/ijssis-2017-753Search in Google Scholar
Junfeng Qiao, Sanyang Liu, Xiaogang Qi and Gengzhong Zheng, “Transmission power control in wireless sensor networks under the minimum connected average node degree constraint”, The International Journal on Smart Sensing and Intelligent Systems, Vol.8, No. 5, 2015, pp.801-821.10.21307/ijssis-2017-784Search in Google Scholar