<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This study evaluates the consistency between the bicycle torque of the proposed system, and a Schoberer Rad Messtechnik (SRM) system. The torque was measured while a trainer was cycling indoors, and the measured values were compared with those of the SRM system. A Bland-Altman statistical analysis indicated that the measured values agreed with the SRM within 95%. The mean absolute percentage error and root mean square error between the measurements of the proposed system and the SRM system were 8.25%, and 1.86, respectively. The results show that the bicycle torque can be measured accurately and transmitted using ZigBee wireless protocol.</p>
</abstract>

This study evaluates the consistency between the bicycle torque of the proposed system, and a Schoberer Rad Messtechnik (SRM) system. The torque was measured while a trainer was cycling indoors, and the measured values were compared with those of the SRM system. A Bland-Altman statistical analysis indicated that the measured values agreed with the SRM within 95%. The mean absolute percentage error and root mean square error between the measurements of the proposed system and the SRM system were 8.25%, and 1.86, respectively. The results show that the bicycle torque can be measured accurately and transmitted using ZigBee wireless protocol.

DEVELOPMENT AND VALIDATION OF A TRACK BICYCLE INSTRUMENT FOR TORQUE MEASUREMENT USING THE ZIGBEE WIRELESS SENSOR NETWORK

Electronic and System Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia

Electrical Engineering Technical College, Middle Technical University (MTU)

International Journal on Smart Sensing and Intelligent Systems

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This study evaluates the consistency between the bicycle torque of the proposed system, and a Schoberer Rad Messtechnik (SRM) system. The torque was measured...

DEVELOPMENT AND VALIDATION OF A TRACK BICYCLE INSTRUMENT FOR TORQUE MEASUREMENT USING THE ZIGBEE WIRELESS SENSOR NETWORK

Data publikacji: 01 mar 2017

Zakres stron: 1 - 22

Otrzymano: 16 paź 2016

Przyjęty: 05 lut 2017

DOI: https://doi.org/10.21307/ijssis-2017-206

© 2017 Sadik Kamel Gharghan et al., published by Sciendo.

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.